Caterpillar WHEEL LOADERS 962L - catalog of spare parts

 

RELIABILITY

 

The Cat® C7.1 ACERT ™ engine offers a combination of proven electronic, fuel and air systems.

The use of rigorous design of the components and processes of validation of machines ensures unsurpassed reliability, durability and long uptime.

STRENGTH

Rigid gearbox with intermediate shaft and axles effectively cope with extreme tasks.

Improved hydraulic hose routing reduces potential hose wear.

Full-flow hydraulic filtration system with additional loop filtering improves the reliability of the hydraulic system and the life of the components.

EFFICIENCY

Increasing engine power by about 10% improves machine performance and response (compared to the H series).

Torque converter with locking clutch in combination with the switching between the latches provides a smooth gear shift, fast acceleration and speed on a slope.

High-performance torque converter improves digging efficiency.

Z-joint provides high breakout force at ground level.

The optional high-lift linkage provides an increased hinge pin height, which facilitates loading in various applications.

The easily loaded buckets of the Performance series have a wider neck and curved side plates, which improve material retention (fill factor) and shorten the cycle time.

An optional fully automatic traction control system (differential lock) improves heap performance and poor foot conditions.

FUEL EFFICIENCY

Fuel consumption is up to 10% lower than that of the H series. *

The powerful ACERT engine burns less fuel, providing power and torque when needed.

Performance buckets have a longer floor that digs easily into the heap, resulting in lower fuel consumption.

Load-sensing hydraulics provide proportional flow for the unit and steering on demand.

Standard economy mode provides maximum fuel economy with minimal impact on performance.

Actual results may vary depending on factors such as, among other things, machine configuration, operator technique, machine application, climate, etc.

EASY OPERATION

The new best-in-class operator environment provides unsurpassed comfort, visibility and efficiency.

Intuitive, ergonomic controls allow operators to focus on their work.

The optional new two-battery ride control system provides superior ride quality and reduces cab vibration.

SECURITY

Excellent access to the cabin with a wide door and staircase steps.

Floor-to-ceiling windshield, large mirrors with built-in point mirrors and a rear-view camera provide industry-leading all-round visibility.

Sturdy, relocated handrails provide secure access to machine platforms.

PERFORMANCE

One-piece hinged hood with side and rear doors; Hydraulic and electrical service centers make access quick and easy.

Safe ground-level access to fuel, oil, filters, and daily maintenance points means less time required for maintenance

The optional, fully integrated Cat Autolube system provides full monitoring of the lubrication system and an overview of diagnostic tests.

CAT CONNECT TECHNOLOGY

Monitoring, management and improvement of the site.

Cat LINK Technology: VisionLink® allows owners to wirelessly access data to monitor the condition, use, and location of the machine.

Cat DETECT technology: a built-in rearview camera improves visibility behind the machine, helping operators work safely. Optional detection of objects behind the Cat increases operator awareness of the working environment, which increases safety on site.

 

Cat PAYLOAD Technologies: The optional Cat Production Measurement 2.0 provides a simple and accurate on-line payload scale that allows operators to deliver accurate loads and work more efficiently. Subscribing to Advanced Productivity provides comprehensive, helpful information that helps you manage and improve the performance and profitability of your operations.

 

 

 

ENGINE

Net Power - ISO 9249	252.0 HP
Engine Model	Cat C7.1 ACERT
Displacement	427.0 in³
Maximum Gross Power - 2,000 rpm - ISO 14396 - Metric	195 kW (265 hp)
Maximum Net Power - 2,000 rpm - ISO 9249 - Metric	185 kW (252 hp)
Peak Gross Torque - 1,400 rpm - ISO 14396	774.0 lb/ft
Maximum Net Torque - 1,400 rpm	726.0 lb/ft

WEIGHTS

Operating Weight	42159.0 lb
Note	Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.4 m3 general purpose bucket with BOCE.

BUCKETS

Bucket Capacities

2.7-4.4 m? (3.5-5.8 yd3)

OPERATING SPECIFICATIONS

Breakout Force	32822.0 lbf
Static Tipping Load - Full 40° Turn - No Tire Deflection	27459.0 lb
Static Tipping Load - Full 40° Turn - With Tire Deflection	25794.0 lb
Note (1)	For a machine configuration as defined under ?Weight.?
Note (2)	Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

TRANSMISSION

Forward - 1	4.3 mile/h
Forward - 2	7.5 mile/h
Forward - 3	12.0 mile/h
Forward - 4	16.0 mile/h
Reverse - 1	4.3 mile/h
Reverse - 2	7.5 mile/h
Reverse - 3	16.0 mile/h
Forward - 5	24.5 mile/h
Note	Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.

HYDRAULIC SYSTEM

Hydraulic Cycle Time - Total	9.5 s
Implement Pump Type	Variable Axial Piston
Implement System - Maximum Operating Pressure	4047.0 psi
Implement System - Maximum Pump Output at 2,150 rpm	64.7 gal/min

SERVICE REFILL CAPACITIES

Cooling System	14.3 gal (US)
Crankcase	5.3 gal (US)
Transmission	11.4 gal (US)
Hydraulic Tank	33.0 gal (US)
Differential - Final Drives - Front	11.4 gal (US)
Differential - Final Drives - Rear	11.4 gal (US)
Fuel Tank	72.6 gal (US)

SOUND

With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)	107.0 dB(A)
With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)	75 dB(A)*
With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)	72.0 dB(A)
Note (1)	*Distance of 15 m, moving forward in second gear ratio.
Note (2)	**For machines in countries that adopt the ?EU Directives.?
Note (3)	***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**	104 LWA***
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**	69.0 dB(A)

BUCKET CAPACITIES

Bucket Range

2.7-4.4 m? (3.5-5.8 yd3)

DIMENSIONS - HIGH LIFT

Centerline of Rear Axle to Edge of Counterweight	7.17 ft
Centerline of Rear Axle to Hitch	5.5 ft
Ground Clearance	1.2 ft
Height - Top of Exhaust Pipe	11.19 ft
Height - Top of Hood	8.83 ft
Height - Top of ROPS	11.33 ft
Hinge Pin Height at Carry Height	2.5 ft
Hinge Pin Height at Maximum Lift	14.72 ft
Lift Arm Clearance at Maximum Lift	12.44 ft
Maximum Width - Over Tires - Loaded	9.33 ft
Note	All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket	24.75 ft
Rack Back - Carry Height	54 degrees
Rack Back - Maximum Lift	66 degrees
Rack Back at Ground	45 degrees
Tread Width	7.0 ft
Wheel Base	11.0 ft

DIMENSIONS - STANDARD LIFT

Centerline of Rear Axle to Edge of Counterweight	7.08 ft
Centerline of Rear Axle to Hitch	5.5 ft
Ground Clearance	1.2 ft
Height - Top of Exhaust Pipe	11.19 ft
Height - Top of Hood	8.83 ft
Height - Top of ROPS	11.33 ft
Hinge Pin Height at Carry Height	2.11 ft
Hinge Pin Height at Maximum Lift	13.72 ft
Lift Arm Clearance at Maximum Lift	11.89 ft
Maximum Width - Over Tires - Loaded	9.33 ft
Note	All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.
Overall Length - Without Bucket	23.39 ft
Rack Back - Carry Height	49 degrees
Rack Back - Maximum Lift	60 degrees
Rack Back at Ground	40 degrees
Tread Width	7.0 ft
Wheel Base	11.0 ft

 

Dimensions

Dimensions - High Lift

Ground Clearance 1.2ft in

Dimensions - Standard Lift

Ground Clearance 1.2ft in

Specifications

Engine

Displacement 427cu in

Net Power - ISO 9249 252hp

Engine Model Cat C7.1 ACERT

Maximum Net Torque - 1,400 rpm 726lb ft

Maximum Net Power - 2,000 rpm - ISO 9249 - Metric

Peak Gross Torque - 1,400 rpm - ISO 14396 774lb ft

Maximum Gross Power - 2,000 rpm - ISO 14396 - Metric 195 kW (265 hp)

Transmission

Forward - 1 4.3mph

Forward - 2 7.5mph

Forward - 3 12mph

Forward - 4 16mph

Forward - 5 24.5mph

Note

Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.

Reverse - 1 4.3mph

Reverse - 2 7.5mph

Reverse - 3 16mph

Weights

Operating Weight 42159 lb

Note

Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.4 m3 general purpose bucket with BOCE.

Buckets

Bucket Capacities 2.7-4.4 m? (3.5-5.8 yd3)

Hydraulic System

Hydraulic Cycle Time - Total 9.5 s

Implement System - Maximum Operating Pressure 4047 psi

Implement System - Maximum Pump Output at 2,150 rpm 64.7 gal/min

Implement Pump Type

Variable Axial Piston

Operating Specifications

Note (1)

For a machine configuration as defined under ?Weight.?

Note (2)

Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Breakout Force 32822lb

Static Tipping Load - Full 40 degrees Turn - With Tire Deflection 25794lb

Static Tipping Load - Full 40 degrees Turn - No Tire Deflection 27459lb

Service Refill Capacities

Cooling System 14.3gal

Fuel Tank 72.6gal

Crankcase 5.3gal

Hydraulic Tank 33gal

Transmission 11.4gal

Differential - Final Drives - Front 11.4gal

Differential - Final Drives - Rear 11.4gal

Sound

Note (1)

*Distance of 15 m, moving forward in second gear ratio.

Note (2)

**For machines in countries that adopt the ?EU Directives.?

Note (3)

***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?

With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)

72 dB(A)

With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)

107 dB(A)

With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)

75 dB(A)*

With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**

69 dB(A)

With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**

104 LWA***

Bucket Capacities

Bucket Range 2.7-4.4 m? (3.5-5.8 yd3)

Dimensions - High Lift

Height - Top of Hood 8.9ft in

Height - Top of Exhaust Pipe 11.2ft in

Height - Top of ROPS 11.4ft in

Ground Clearance 1.2ft in

Centerline of Rear Axle to Edge of Counterweight 7.2ft in

Centerline of Rear Axle to Hitch 5.5ft in

Wheel Base 11ft in

Overall Length - Without Bucket 24.8ft in

Hinge Pin Height at Maximum Lift 14.8ft in

Lift Arm Clearance at Maximum Lift 12.5ft in

Rack Back - Maximum Lift 66 degrees

Rack Back - Carry Height 54 degrees

Rack Back at Ground 45 degrees

Tread Width 7ft in

Note

All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Hinge Pin Height at Carry Height 2.5ft in

Maximum Width - Over Tires - Loaded 9.4ft in

Dimensions - Standard Lift

Height - Top of Hood 8.9ft in

Height - Top of Exhaust Pipe 11.2ft in

Height - Top of ROPS 11.4ft in

Ground Clearance 1.2ft in

Centerline of Rear Axle to Edge of Counterweight 7.1ft in

Centerline of Rear Axle to Hitch 5.5ft in

Wheel Base 11ft in

Overall Length - Without Bucket 23.4ft in

Hinge Pin Height at Maximum Lift 13.8ft in

Lift Arm Clearance at Maximum Lift 11.9ft in

Rack Back - Maximum Lift 60 degrees

Rack Back - Carry Height 49 degrees

Rack Back at Ground 40 degrees

Tread Width 7ft in

Note

All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Hinge Pin Height at Carry Height 2.2ft in

Maximum Width - Over Tires - Loaded 9.4ft in