Caterpillar WHEEL LOADERS 907H - catalog of spare parts
Motor dimensions
Hole - 3.7 inches
4.7 inch travel
Displacement - 203cu per
Service replenishment options
Cooling system - 6.3 gal
Fuel tank - 20.6 gal
Hydraulic system - 22.2 gal
Engine oil - 2.6gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471-1994
FOPS - SAE J / ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Choose WHEEL LOADERS 907H section:
| 1T0994 | BEARING-BALL | Caterpillar | View |
| 2S0480 | CUP | Caterpillar | View |
| 2P8104 | 2P8104 | Caterpillar | View |
| 7T6088 | BEARING A | Caterpillar | View |
| 6Y6846 | 6Y6846 | Caterpillar | View |
Specifications
engine
Engineering model
Gross Power - 74 HP
Net power - 70hp
Transmission
Speed 1 - 4.3 miles per hour
Speed 2 - 12.4 mph
High Speed - 21.7 mph
Weights
Working Weight - 12,809 lbs.
Buckets
Bucket volume - 0.75 - 1.2 m3 (0.98 - 1.6 cubic meters)
Hydraulic system
Hydraulic cycle time - dump - 2 seconds
Hydraulic Cycle Time - Lift - 5 Seconds
Hydraulic Cycle Time - Rackback - 2.5 seconds
The main relief is 3,400 psi
Hydraulic cycle time - lower, float - 4 seconds
3rd Auxiliary Flow - High Flow - 33 gallons / min
3rd auxiliary stream - standard - 22 gallons / min
Performance characteristics
Tear Off - 9,442 lbs
Nominal bucket capacity - 1.3yd3
Full Turn Static Tipping Load - Bucket - 6,989 pounds
Stand back - transport position - 52 degrees
7194 lb hydraulic lift capacity
Direct Tipping Load - Bucket - 9,524 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 500 mm (20 in) load center, 100 mm (4 in) transport above ground) - 6,140 pounds
Nominal full-load workload - forks (EN 474-3: 2006, solid and flat surface, 500 mm (20 in) load center) (80% of FTSTL) - 4,674 pounds
Nominal full-load workload - forks (EN 474-3: 2006, rough terrain, 500 mm (20 in) load center) (60% of FTSTL) - 3505 pounds
Nominal full-load workload - 3,494 pounds