Caterpillar WHEEL LOADERS 906M - catalog of spare parts

type: WHEEL LOADERS;

model: 906M;

Loader hydraulic system

Double Acting Lifting Cylinder - Stroke - 27.4 Inches

Double Action Tilt Cylinder - Stroke - 16.4in

Maximum Consumption - Gun Pump - 19 gal / min

3rd Function Maximum Pressure - 3408 psi

Maximum Working Pressure - Implement Pump - 3408 psi

Pressure Relief - Tilt Cylinder Rod - 2756 psi

Maximum boost pressure - 3191 psi

Double Acting Lifting Cylinder - 3 Inch Diameter

Double Acting Lifting Cylinder - Bar Diameter - 2 Inches

Double acting tilt cylinder - bore diameter - 3.5 inches

Double Action Tilt Cylinder - Rod Diameter - 2.2 Inches

Hydraulic cycle time - 1800 rpm - rise, ground level to maximum rise - 5.5 s

Hydraulic cycle time - 1800 rpm - unloading at a maximum lift height - 1.5 s

Hydraulic cycle time - 1800 rpm - swimming down, maximum rise to ground level - 2.6 s

Hydraulic cycle time - 1800 rpm - Total cycle time - 9.6 s

Hydraulic cycle time - 1000 rpm - rise, ground level to maximum rise - 9.6 s

Hydraulic cycle time - 1000 rpm - unloading at maximum lift height - 3 s

Hydraulic cycle time - 1000 rpm - swimming down, maximum rise to ground level - 2.6 s

Maximum flow rate - Implement pump - Auxiliary function Standard flow rate - 19 gal / min

Maximum flow rate - Implement pump - Auxiliary function High flow rate - 31 gallons / min

Pressure Relief - Tilt Cylinder Head - 4,496 psi

Choose WHEEL LOADERS 906M section:

Bearings

Engine

Other

1T0994	BEARING-BALL	Caterpillar	View
2S0480	CUP	Caterpillar	View
6Y6846	6Y6846	Caterpillar	View

Specifications

engine

Net power - 74 hp

Displacement - 201cu per

Hole - 3.7 inches

4.7 inch travel

Emissions

* Cat C3.3B DIT engine complies with US EPA Tier 4 Final / EU Stage IIIB emission standards or equivalent Tier 4 Interim / Stage IIIA emission standards.

Engine Model - Cat C3.3B DIT *

Note (1) - The net power ratings are tested under standard conditions for the specified standard.

Note (2) - The net power shown is the power available on the flywheel when the engine is equipped with an alternator, air cleaner, exhaust filter and fan at minimum speed.

Note (3) - No degradation is required at altitudes up to 3,000 m (10,000 ft). Auto derate protects hydraulic and transmission systems.

Note (4) - Flywheel in accordance with the SAE baseline conditions with fan at maximum speed.

Maximum apparent power - SAE J1995 - 74 hp

Maximum apparent power - ISO 14396 - 73 hp

Maximum gross power - 73 hp

Maximum apparent power - ISO 14396 (DIN) - 74 hp

Maximum Torque - ISO 14396 - 192 lb-ft

Maximum Net Torque - SAE J1349 - 189 lb-ft

Maximum Net Torque - ISO 9249 (1977) / EEC 80/1269 - 191 lb-ft

Note (5)

The Cat C3.3B Tier 4 Final / Stage IIIB uses an active regeneration system that does not require operator interaction under normal conditions.

Rated net power - 2400 rpm - SAE J1349 - 73 hp

Rated net power - 2400 rpm - ISO 9249 (1977) / EEC 80/1269 - 74 hp

A train

Forward - Range 1 - 6 mph

Forward - Range 2 - 12 mph

Ahead - High Range - 22 mph

Reverse - Range 1 - 6 mph

Reverse - Range 2 - 12 mph

Reverse - High Range - 22 mph

Operational

Working Weight - 12,346 lbs

Steering

Maximum Working Pressure - Steering Pump - 3191 psi

Steering joint angle - in each direction - 39 degrees

Double Acting Steering Cylinder - Bore Diameter - 3.1in

Double Acting Steering Cylinder - 1.4 Inch Diameter

Double Acting Steering Cylinder - Stroke - 11.8 Inches

Nominal flow rate - steering pump - 12 gal / min

Maximum Steering Torque - 0 Degrees (Direct Machine) - 37,155 lb ft

Maximum Steering Torque - 39 Degrees (Full Turn) - 27,747 lbs / ft

Steering AC cycle time - from full left to full right - 2620 rpm - 3 s

The number of revolutions of the steering wheel - from full left to full right or from full right to full left - <6 turns

Weights

The note

The technical specifications presented apply to a machine equipped with general purpose buckets, bolt-on cutting edges, an operator weighing 75 kg (165 lbs), Dunlop 405/70 SPT9 tires, full fuel, a comfortable EROPS cab, standard flow hydraulics and an on-board turn coupling. - The 906M is equipped with a 0.9 m3 (1.2 cubic inch) bucket with bolt-on cutting edge.

Tires

Note (1) - * Standard bus.

Note (2) - Other tire options are available; contact your Cat dealer for details.

Note (3) - In some cases, the truck’s production capacity may exceed the tire capacity in tons / hour (t / mph).

Option (1) - 335/80 R18 XZSL Michelin

Option (2) - 340/80 R18 AT-R Firestone

Option (3) - 340/80 R18 XMCL Michelin

Option (4) - 340/80 R18 TRI2 Nokian

Option (5) - 340/80 R18 Bibload Michelin

Option (6) - 405/70 R18 SPT9 Dunlop *

Option (7) - 12.5 / 80 R18 Flexport

Note (4) - Caterpillar recommends consulting your tire supplier to evaluate all conditions before choosing a tire model.

Buckets

Bucket volume - 0.75 m3-1.2 m3 (1.0 g3-1.6 m 3)

General Purpose - 1.2 m

Lightweight Material - 1.6yd3

Performance characteristics

Nominal bucket capacity - 1.2yd3

7507 lb Tipping Load

Tipping Load - Direct - ISO 14397-1 - 8666 lbs.

Tipping Load - Full Turn - ISO 14397-1 - 7061 lbs

Ground clearance - full lift and 45-degree drop - 8.3 feet per

Achieve - full lift and 45-degree drop - 2.4 feet in

Steering joint angle - in each direction - 39 degrees

Service replenishment options

Cooling system - 4.4 gal

Fuel tank - 13.7 gal

Hydraulic Tank - 12.2 Gallons

Hydraulic system - including tank - 18.5 gallon

Crankcase - 3gal

Gearbox - gearbox - 2.2gal

Taxi

ROPS - SAE J1040 MAY94, ISO 3471-1994.

FOPS - SAE J / ISO 3449 APR98, Level II, ISO 3449 1992 Level II.

Note (1) - Cat cab and roll over protective structures (ROPS) are standard in North America and Europe.

Note (2) - When properly installed and serviced, the Caterpillar cab, when tested with doors and windows closed in accordance with the duty cycle procedures specified in ISO 6395 2008, results in sound exposure to the Leq operator (equivalent sound level pressure) is 66 dB (A) typical.

Dimensions with Bucket (approximate) - Standard Lift - With ISO Coupling

Height - From Ground to Cabin ** - 8.1 feet in

Height - ground clearance ** - 1 foot in

Length - Wheelbase - 7.1 Feet in

Length - Total * - 18 ft. In

Reach - Bucket 45 degrees * - 2.4 feet per

Digging Depth ** - 3.7 inches

Ground clearance - bucket at 45 degrees * - 8.1 feet per

Ground clearance - level bucket ** - 10 feet in

Height - Bucket Pin ** - 10.6 ft.

Width - Bucket - 6.2 Feet in

Width - Tread Center - 4.6 feet in

Turn radius - above bucket - 14.5 feet per

Turning radius - inside tires - 7.4 feet per

Machine Width - 6 Feet in

Dump angle at full rise - 45 degrees

Departure angle - 33 degrees

Joint angle - 39 degrees

Note (1) - * Depends on the bucket.

Note (2) - ** Bus dependent.

Note (3). The dimensions shown are for a machine with general purpose buckets, bolt-on cutting edges, an operator weighing 75 kg (165 lbs), no air conditioning, and Dunlop 405/70 SPT9 tires.

Dimensions with Bucket (approximate) - Standard Lift - With SSL Connector