Caterpillar WHEEL LOADERS 906H - catalog of spare parts
Bucket
Discharge clearance at maximum lift - 7.86 feet per
Dimensions
Length with bucket on the ground - 18.33 feet in
Tire Width - 6.04 Feet in
Height to Cab Top - 8.09 Feet in
Wheelbase - 7.12 feet in
Ground clearance - 0.99 feet in
Articulated finger - maximum height - 10.6 feet per
Reach in Max Lift and Dump - 2.66 feet in
Choose WHEEL LOADERS 906H section:
| 1T0994 | BEARING-BALL | Caterpillar | View |
| 2S0480 | CUP | Caterpillar | View |
| 2P8104 | 2P8104 | Caterpillar | View |
| 7T6088 | BEARING A | Caterpillar | View |
| 6Y6846 | 6Y6846 | Caterpillar | View |
Specifications
engine
Engine make - 2236
Engine Model - C3.4
Net power - 70hp
Gross Power - 74 HP
Measured Power @ - 2500 rpm
Displacement - 203cu per
ISO 9249 Rating - 71 HP
EEC 80/1269 Rating - 71h.p.
SAE J1349 Rating - 70hp
Operational
Working Weight - 12412.1 lbs
13.8 gallon fuel tank capacity
The volume of the hydraulic system is 22.2 gallons
2.7 gallon engine oil
Cooling system capacity - 6.4 gal
Static Tipping Weight - 8785.5 lbs.
Turn radius - 7.3 feet in
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Tire size - 405/70 R18
Transmission
Transmission Type - Hydrostatic
The number of forward gears - 2
Number of reverse gears - 2
Top Speed - Forward - 12.5 mph
Max. Speed - Reverse - 12.5 mph
Speed 1 - 4.3 miles per hour
Speed 2 - 12.4 mph
High Speed - 21.7 mph
Weights
Working Weight - 12,412 lbs.
Buckets
Bucket volume - 0.75 - 1.2 m3 1.0 - 1.6 m3
Hydraulic system
Safety Valve Installation - 3400
Pump capacity - 22 gal / min
Raising time - 5sec
Dump Time - 2sec
Drop Time - 4sec
Hydraulic cycle time - dump - 2 seconds
Hydraulic Cycle Time - Lift - 5 Seconds
Hydraulic Cycle Time - Rackback - 2.5 seconds
The main relief is 3,400 psi
Hydraulic cycle time - lower, float - 4 seconds
3rd Auxiliary Flow - High Flow - 33 gallons / min
3rd auxiliary stream - standard - 22 gallons / min
Bucket
Mine clearance at Max Raise - 7.9 feet in
Bucket Width - 6.2 Feet in
Bucket Capacity - Bulk - 1.2yd3
Dimensions
Length with bucket on the ground - 18.4 feet in
Tire Width - 6.1 Feet in
Height to Cab Top - 8.1 ft.
Ground clearance - 1 foot in
Wheelbase - 7.2 Feet
Articulated finger - maximum height - 10.6 feet per
Reach in Max Lift and Dump - 2.7 feet in
Wheelbase - 7.1 Feet
Hinge axis height - 10.6 feet in
Machine Height - 8.1 Feet in
Performance characteristics
Tear Off - 9,442 lbs
Nominal bucket capacity - 1.2yd3
Tire size - 405/70 R18
Full Turn Static Tipping Load - Bucket - 6,967 lbs.
Stand back - transport position - 52 degrees
Direct Tipping Load - Bucket - 8785 lbs
Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 500 mm (20 in) load center, 100 mm (4 in) transport above ground) - 5,997 pounds
Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 500 mm (20 in) load center) (80% of FTSTL) - 4,553 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, rough terrain, 500 mm (20 in) load center) (60% of FTSTL) - 3,415 pounds
Nominal full-load workload - 3,483 pounds
Service replenishment options
Cooling system - 6.3 gal
Fuel tank - 13.7 gal
Hydraulic system - 22.2 gal
Engine oil - 2.6gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471-1994
FOPS - SAE J / ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Motor dimensions
Hole - 3.7 inches
4.7 inch travel
Displacement - 203cu per