Caterpillar PIPELAYER PL83 - catalog of spare parts

model: PL83;

The PL83 is part of a complete line of specially designed cat pipelayers designed for performance, safety and ease of maintenance. The light transport width, combined with the experienced support of the cat dealer network, means that this key equipment for pipelines is available anytime and anywhere.

Choose PIPELAYER PL83 section:

Belts

Blades

Blocks

Bolts

Boots

Braking

Cage

Clamps

Covers

Dampers

Discs

Drives

Drums

Dryer

Edges

Electrical

Electrical Relay

Engine

Fans

Field Coils

Filters

Flanges

Fuse

Gaskets

Gears

Hoses

Liners

Lines

Manifolds

Nozzles

Nuts

Pads

Pedals

Pinions

Pins

Piston Rings

Pistons

Plates

Plunger & Barrel

Power train

Pre-Cleaners

Pulleys

Pumps

Recoil

Rivets

Rollers

Screws

Seals

Seals and gaskets

Sensors

Separators

Shims

Shoes

Sockets

Springs

Strap

Studs

Teeth

Valves

Washers

Water Pump

Wires

Yokes

Other

Show all parts

CREATED FOR IMPLEMENTATION

The integrated power train with differential steering and an updated hydraulic system work together to provide power and improved machine maneuverability for any application of the pipe layer.

Electrohydraulics provides greater response and precise control of motors with adjustable winch speed for high loads, which improves machine performance.

The counterweight profile improves the load capacity.

Differential steering maintains full power on both tracks for best-in-class steering, even with a loaded boom, increasing maneuverability in hard to reach places.

The improved center of gravity of the machine and the elongated frame of the tracked roller with the rear tension wheel shifted provide a large cross on the ground, improving the slope.

BECAUSE ONLY ACCOUNTS

Equipped with Product Link ™, which provides remote monitoring and improves overall fleet management.

Full engine maintenance on the left side, including the filler tube, the dipstick, the air filter, the fuel filters, the oil filter and the coolant level check, ensures quick and efficient scheduled maintenance.

High oil replacement speed is standard and makes maintenance even faster.

Hydraulic filters and transmission filters and fuel tank drain are located at the rear of the machine and are conveniently serviced from ground level.

Pressure taps are located inside the hydraulic system to provide quick monitoring.

The main components, such as the engine, transmission and final drives, have a modular design for faster removal during maintenance, cost savings and downtime.

DEVELOPED FOR OPERATORS

The tool joystick allows you to place all the controls and functions of the pipeline in one hand.

The ergonomic and positioned low-effort control knob provides simultaneous accurate positioning of the load line, boom and retractable counterweight.

Dual brake pedal control provides improved maneuverability and steering.

Planetary differential steering contributes to excellent maneuverability in hard-to-reach places of work, as well as increases bias.

WORK IN COMFORT

A quieter pressurized cab with a heated / ventilated seat increases operator comfort and productivity.

The ergonomic seat is located for better visibility of the working area and convenient access to the machine control lever, switches and pedals.

BUILT-IN SAFETY FEATURES

The Load Monitor Indicator (LMI) is ready from the factory and can accept regional LMI systems.

Comfortable steps, handles and railings provide safe access / exit.

Enlarged roof window with retractable blinds, extra mirrors and a corner door improves visibility of the trench, boom and blocks.

The standard operator presence detection system allows the machine to remain idle when the operator is not sitting, but is blocking the power train to avoid unintended movement.

A rearview camera is available to further improve visibility around the car.

ENGINE

Engine Model	Cat C15
Flywheel Power	319.0 HP
Tier 4 Final/Stage IV: Net Power (Rated**) - ISO 9249/SAE J1349	319.0 HP
Tier 4 Final/Stage IV: Net Power (Rated**) - ISO 9249/SAE J1349 (DIN)	323.0 HP
Tier 3/Stage IIIA Equivalent: Net Power (Rated****) - ISO 9249/SAE J1349	329.0 HP
Tier 3/Stage IIIA Equivalent: Net Power (Rated****) - ISO 9249/SAE J1349 (DIN)	333.0 HP
Fuel Tank	109.6 gal (US)
DEF Tank(1)	4.5 gal (US)
Note (2)	**Rated speed 1,900 rpm
Note (4)	****Rated speed 1,850 rpm

PIPELAYING EQUIPMENT

Lift Capacity

170000.0 lb

WEIGHTS

Operating Weight	111316.0 lb
Shipping Weight	85880.0 lb

COMPONENTS

Standard Boom	3148.0 lb
Extended Boom	3458.0 lb
Removable Counterweight (12 plates) Single Plate	1603.0 lb
Total Removable Counterweight*	19233.0 lb

UNDERCARRIAGE

Track Gauge	92.0 in
Length - Track on Ground	12.2 ft
Ground Contact Area	8215.0 in²
Width - Standard Shoes	30.0 in

DIMENSIONS (APPROXIMATE)

Width - Tractor - Standard Shoes	10.7 ft
Width - Tractor - Counterweight Extended	19.9 ft
Width - Tractor - Counterweight Retracted	13.5 ft
Width - Tractor - Counterweight/Boom Removed	12.7 ft
Track Gauge	7.7 ft
Length - Track on Ground	12.2 ft
Machine Height - Top of Counterweight	11.2 ft
Height - Machine - Cab and ROPS	11.6 ft
Boom Height (at SAE 1.22 m [4 ft] Overhang) 7.31 m (24 ft) Boom	26.3 ft
Boom Height (at SAE 1.22 m [4 ft] Overhang) 8.53 m (28 ft) Boom	30.3 ft

AIR CONDITIONING SYSTEM

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

Dimensions

Dimensions (Approximate)

Track Gauge 7.7ft in

Undercarriage

Track Gauge 7.67ft in

Specifications

Engine

Emissions U.S. EPA Tier 4 Final/EU Stage IV

Engine Model Cat C15 ACERT

Flywheel Power 319hp

Note (1) *Maximum speed 1,700 rpm

Note (2) **Rated speed 1,900 rpm

Note (3) ***Maximum speed 1,600 rpm

Note (4) ****Rated speed 1,850 rpm

U.S. EPA Tier 3/EU Stage IIIA Equivalent - Net Power - ISO 9249 329hp

Tier 4 Final/Stage IV: Engine Power (Maximum*) - SAE J1995363hp

Tier 4 Final/Stage IV: Bore 5.4in

U.S. EPA Tier 4 Final/EU Stage IV - Net Power - ISO 9249 319hp

Tier 4 Final/Stage IV: Net Power (Rated**) - ISO 9249/SAE J1349 (DIN) 323hp

Tier 4 Final/Stage IV: Stroke 6.8in

Tier 4 Final/Stage IV: Engine Power (Maximum*) - ISO 14396 (DIN) 364hp

Tier 4 Final/Stage IV: Net Power (Rated**) - ISO 9249/SAE J1349 319hp

Tier 4 Final/Stage IV: Engine Power (Maximum*) - ISO 14396359hp

Tier 4 Final/Stage IV: Displacement 928cu in

Tier 4 Final/Stage IV: Net Power (Maximum*) - ISO 9249/SAE J1349 345hp

Tier 4 Final/Stage IV: Net Power (Maximum*) - ISO 9249/SAE J1349 DIN 350hp

Tier 3/Stage IIIA Equivalent: Engine Power (Maximum***) - SAE J1995 366hp

Tier 3/Stage IIIA Equivalent: Engine Power (Maximum***) - ISO 14396 361hp

Tier 3/Stage IIIA Equivalent: Engine Power (Maximum***) - ISO 14396 (DIN) 366hp

Tier 3/Stage IIIA Equivalent: Net Power (Rated****) - ISO 9249/SAE J1349 329hp

Tier 3/Stage IIIA Equivalent: Net Power (Rated****) - ISO 9249/SAE J1349 (DIN) 333hp

Tier 3/Stage IIIA Equivalent: Net Power (Maximum***) - ISO 9249/SAE J1349 343hp

Tier 3/Stage IIIA Equivalent: Net Power (Maximum***) - ISO 9249/SAE J1349 DIN 347hp

Tier 3/Stage IIIA Equivalent: Bore 5.4in

Tier 3/Stage IIIA Equivalent: Stroke 6.8in

Tier 3/Stage IIIA Equivalent: Displacement 928cu in

Transmission

1 Forward 2.1mph

2 Forward 3.8mph

3 Forward 6.6mph

1 Reverse 2.8mph

2 Reverse 5mph

3 Reverse 8.8mph

Drawbar Pull - 1 Forward 148lb ft

Drawbar Pull - 2 Forward 81lb ft

Drawbar Pull - 3 Forward 44lb ft

Undercarriage

Shoe Type Moderate Service

Ground Contact Area 8215 in

Track Gauge 7.7ft in

Length - Track on Ground 12.2ft in

Grouser Height 3in

Width - Standard Shoes 30in

Number of Rollers - Each Side 9

Number of Shoes - Each Side 48

Number of Carrier Rollers - Each Side 1

Weights

Shipping Weight 85880lb

Hydraulic System

Implement Pump Output - Maximum - Closed Loop 83.8 gal/min

Steering Pump Output - Closed Loop 86.7 gal/min

Counterweights – Gear 34.3 gal/min

Variable Charge Pump Output - Maximum - Open Loop 62.6 gal/min

Fan Pump 35.7 gal/min

Operating Specifications

Lift Capacity at Tipping Point - ISO 8813 170000lb

Dimensions (Approximate)

Track Gauge 7.7ft in

Width - Tractor - Standard Shoes 10.7ft in

Width - Tractor - Counterweight/Boom Removed 12.7ft in

Width - Tractor - Counterweight Retracted13.5ft in

Width - Tractor - Counterweight Extended19.9ft in

Machine Height - Top of Counterweight 11.2ft in

Length - Track on Ground 12.2ft in

Operating Length 17.9ft in

Height - Machine - Cab and ROPS 11.6ft in

Grouser Height 3.1in

Ground Clearance - SAE J1234 1.6ft in

Boom Height (at SAE 1.22 m [4 ft] Overhang) 7.31 m (24 ft) Boom 26.3ft in

Boom Height (at SAE 1.22 m [4 ft] Overhang) 8.53 m (28 ft) Boom 30.3ft in

Drawbar – Height 1.4ft in

Standards

BrakesBrakes meet the International Standard ISO 10265:2008

ROPS

ROPS (Rollover Protection Structure) meets the International Standard ISO 3471:2008