Caterpillar ARTICULATED TRUCKS 740CEJ - catalog of spare parts
engine
Engine make - 2236
Engine Model - C18 Acert
Full power - 511 hp
Net power - 496 hp
Displacement - 1106cu in
Measured torque @ - 1200 rpm
Choose ARTICULATED TRUCKS 740CEJ section:
8T2275 | 8T2275 | Caterpillar | View |
2P1823 | 2P1823 | Caterpillar | View |
2P1824 | CONE | Caterpillar | View |
1W7238 | SHAFT A | Caterpillar | View |
1W7239 | SHAFT A | Caterpillar | View |
1P1367 | PLUNGER | Caterpillar | View |
8S9075 | CONE | Caterpillar | View |
8S9076 | CUP | Caterpillar | View |
6V0330 | CUP | Caterpillar | View |
6S2905 | RACE & ROLLER | Caterpillar | View |
7T9342 | CONE-BRG | Caterpillar | View |
7T9343 | CUP-BRG | Caterpillar | View |
Specifications
The diameter of the barrel - 5.7 inches
Stroke - 7.2 inches
Net power - SAE J1349 - 496 hp
Full power - SAE J1995 - 511 hp
Engine Model - Cat C18 ACERT
Net power - ISO 14396 - 504 hp
Lowering the engine is not required below - 10,000 feet in
Maximum engine torque (SAE J1995) - 1931 lb-ft
Peak engine speed - 1200 rpm
Peak Engine Torque Network (SAE J1349) - 1887 lbs.
Engine Model - USA EPA Tier 4 Final / EU Stage IV / Japan 2014 (Tier 4 Final) / Korea Tier 4 Final - Cat C18 ACERT
Operational
Cooling system capacity - 23.7 gal
Transmission Fluid Capacity - 19.8 Gal
Transmission
Number of front gears - 9
Number of rear gears - 2
Forward - 1 - 3.8 miles per hour
Forward - 2 - 5 miles per hour
Forward - 3 - 7 miles per hour
Forward - 4 - 8.8 miles per hour
Forward - 5 to 11.6 miles per hour
Forward - 6 - 14.2 mph
Forward - 7 - 19.6 miles per hour
Reverse - 1 - 4 miles per hour
Reverse - 2 - 9.1 mph
Forward - 8 - 23.5 miles per hour
Forward - 9 - 34 miles per hour
Steering
Lock to Lock - 4.6 seconds at 60 rpm
Weights
Front Axle - Empty - 45239 pounds
The central axis is empty - 17416%
Rear axle - empty - 16865 pounds
Front axle - loaded - 3527%
Central axis - loaded - 40124%
Rear axle - loaded - 40124 pounds
Totally empty - 79521 pounds
Total loaded - 163296 pounds
Dump
Nominal payload - 84,000 pounds
Capacity - Blow - 23.5 id3
Capacity - Bulked - 30.1yd3
Service replenishment options
Cooling system - 23.7 gal
Fuel tank - 145.3 gallons
DEF Tank - 6.6 gallons
The last disk - each - 1.3gal
Engine crankcase - 13.7 gallon
Brake Cooling Tank - 17.7 Gal
Hydraulic steering / lifting system - 36.9 gal
Transmission - OTG - 19,8gal
Axis - each - 15,8hal
Standards
Cab - FOPS - ISO 3449 Level II-2005
Cab - ROPS - ISO 3471-2008
Brakes - ISO 3450-2011
Steering - ISO 5010-2007
Operating weight
Front axle - empty - 45239lb
The central axis is empty - 17416 pounds
Rear axle - empty - 16865 pounds
Total - Empty - 79521 pounds
Front Axle - Rated Load - 3527 lbs.
Central axis - rated load - 40124 pounds
Rear Axle - Rated Load - 40124 lbs.
Total - Rated load - 83,776 pounds
Front axle - with a load - 48,766 pounds
Central axis - with load - 57541 pounds
Rear Axle - Loaded - 56989lb
Total - loaded - 163296 pounds
Sound levels
Internal cabin - 79 dB (A)
Turning circle
Note. The dimensions shown are for machines equipped with 29.5R25 tires.
Dimensions of rotation - angle of rotation - left / right
Swing Dimensions - SAE Swing Radius - 340 inches
Swing Dimensions - Clearance Radius - 358 inches
The size of the rotation - the inner radius - 174 inches
Swing Size - Aisle width - 235 inches
Body volume
Heaped up (SAE 2: 1) - 30.1yd3
Strike - 23.5 id3
Body lift
Release time - 17 s
Withdrawal time - 20 s
Body plate
Body plate type - high-strength wear-resistant steel Brinell HB450