Caterpillar ARTICULATED TRUCKS 730C - catalog of spare parts

Specifications

Engine

The number of cylinders - 6

Engine make - 2236

Engine Model - C11 with ACERT Technology

Full power - 329 hp

Net power - 325 hp

Displacement - 762.8cu in

Aspiration - Turbo-charged

Hole diameter - 5.1 inches

Stroke - 6.2 inches

Emissions - 730 meets Level 4 Final / Stage IV standards.

Net power - ISO 9249 - 321 hp

Net power - SAE J1349 - 367l.s.

Full power - SAE J1995 - 375 hp

Engine Model - Cat C13 ACERT

Net power - ISO 14396 - 370 hp

Note (1)

Links to Level 4 / Stage IV Final include Level 4 US EPA Final, EU Stage IV, Japan 2014 (Level 4 Final) and Korean Tier 4 Emission Standards Final.

Note 2)

Rated power is applied at a rated speed of 1800 rpm when tested under the conditions for the specified standard.

Note 3)

The declared net power is the power available on the flywheel when the engine is equipped with an alternator, an air cleaner, a silencer and a fan at minimum speed.

Note (4)

The net power when the fan is running at maximum speed is 254 kW (341 hp) under standard SAE conditions.

Net power - EEC 80/1269 - 321 hp

Note (5)

DEF used in Cat SCR systems must comply with the requirements set forth in International Organization for Standardization (ISO) 22241-1. The requirements of ISO 22241-1 are met by many DEF brands, including those with AdBlue or API certificates.

Maximum engine torque (SAE J1995) - 1579 lb-ft

Peak engine speed - 1200 rpm

Engine Model - USA EPA Tier 4 Final / EU Stage IV - Cat C13 ACERT

Peak Engine Torque Network (SAE J1349) - 1564 lb-ft

No lowering of the engine below - 12,500 feet in

Operational

Fuel tank capacity - 95.2 gals

Hydraulic system capacity - 27g

Cooling system capacity - 22.5 gal

Engine oil capacity - 9.8 gallons

Transmission Fluid Capacity - 9.6 gals

Tire size - 23.5R25

Transmission

Number of front gears - 6

Number of rear gears - 1

Top Speed ​​- 34.4 mph

Forward - 1 - 5 miles per hour

Forward - 2 - 9 miles per hour

Forward - 3 - 14 miles per hour

Forward - 4 - 21 miles per hour

Forward - 5 - 29 miles per hour

Forward - 6 - 34 miles per hour

Reverse - 1 - 6 miles per hour

Steering

Lock to Lock - 4.75 seconds at 60 rpm

Weights

Front Axle - Empty - 28,968.8 pounds

The central axis is empty - 11023.2%

Rear Axle - Empty - 10383.8 pounds

Front axle - loaded - 34965.4%

Central axis - loaded - 39021.9%

Rear Axle - loaded - 38382.5 pounds

Total empty - 50375.7 pounds

Total loaded - 112369.7 pounds

Dump

Rated payload - 61949.9 pounds

Capacity - Shock - 17.2id3

Capacity - Bulked - 22.2yd3

Lifting time - 12 sec

Down Time - 12sec

Dimensions

Overall length - 32.6 feet

Overall width - 9.5 feet

Overall height is 11.3 feet

Wheelbase - 15.4 feet per

Ground clearance - 1.7 feet

Blade height - 21.4 feet

Blade ground clearance - 1.9 feet

Service replenishment options

Cooling system - 21.9 gal

Fuel tank - 108.8 gal

DEF Tank - 5.3 gal

Engine crankcase - 10gal

Gearbox - 12.4 gallons

Hydraulic system - 29.1 gal

End Discs / Differential - 33g

Transmission with output gear - 6.3 gal

Standards

Cabin - FOPS - ISO 3449 Level II 2005

Cab - ROPS - ISO 3471 2008

Brakes - ISO 3450 2011

Steering - ISO 5010 2007

Operating weight

Front axle - empty - 33069lb

The central axis is empty - 10053 pounds

Rear axle - empty - 9568 pounds

Total - Empty - 52,690 pounds

Front Axle - Rated Load - 7231 lb.

Central axis - rated load - 27,249 pounds

Rear Axle - Rated load - 27,249 pounds

Total - Rated load - 61729 pounds

Front Axle - Loaded - 40,300 pounds

Central Bridge - loaded - 37302 pounds

Rear axle - loaded - 36817 pounds

Total - loaded - 114420 pounds

Sound levels

Internal cabin - 72 dB (A)

Note (1)

The Leq operator sound pressure level (equivalent sound pressure level) measured in accordance with the duty cycle procedures specified in ANSI / SAE J1166 OCT98 is 72 dB (A) for the cab offered by Caterpillar, when properly installed, maintained and tested with doors and the windows are closed.

Note 2)

Hearing protection may be required when working with an open operator station and cab (if they are not properly serviced or doors / windows open) for long periods of time or in noisy environments.

Turning circle

Note Dimensions are for machines equipped with 23.5R25 tires.

Dimensions of rotation - angle of rotation - left / right

Swing Dimensions - SAE Swing Radius - 294 inches

Swing Dimensions - Clearance Radius - 318 inches

Dimensions of rotation - inner radius - 153 inches

Swing Size - Aisle width - 210 inches

Body volume

Heaped up (SAE 2: 1) - 23yd3

Struck - 17.4yd3

Rear Door Kick - 18.2yd3

The back door tricked SAE 2: 1 - 24.6yd3

Body lift

Rise time - 12 s

Decrease time - 8 s

Slab thickness

Front - 0.4 inches

Scow - 0.6 inches

Side - 0.5 inch

Base - 0.6 inches

Front panel - 0.3 inches

Base plate - 0.6 inches

Side plates - 0.5 inches

Body plate

Body plate type - high-strength wear-resistant steel Brinell HB450

Optimum fit of loader / truck pass

Note. Optimum system fit gives you a significant performance advantage. The Model 730 is great for Cat 349F and 336F hydraulic excavators; and wheel loaders Cat 972M, 966M, 962M and 950M. Compliance with the tools of loading and transportation leads to an increase in production and a decrease in system costs per unit of displaced volume.

Hydraulic Excavators: 349F / 349F XE - Skips - 45

Hydraulic Excavators: 336F / 336F XE - Skips - 56

Wheel loaders: 972M / 972M XE - passes - 34

Wheel loaders: 966M / 966M XE - passes - 4

Wheel loader: 962M - passes - 45

Wheel loader: 950M - passes - 5