Caterpillar WORK TOOL 824G II - catalog of spare parts
Dimensions
Length with blade on the ground - 27.2 feet in
Tire Width - 14.8 Feet in
Height to Cab Top - 12.2 Feet in
Wheelbase - 12.2 feet in
Ground clearance - 1.3 feet in
Wheelbase - 12.1 feet in
Height - Top of the exhaust pipe - 138 inches
Centerline of rear axle to hitch - 73.2 inches
Height - Top of Hood - 100.8 inches
Height - Bottom Stairs - 2.3 feet in
Height - Cab Top - 12.1 Feet in
Length - with blade on the ground - 26.8 feet in
The center line from the rear axle to the edge of the bumper is 8.7 feet in
Ground clearance - Bumper - 2.9 feet in
Choose WORK TOOL 824G II section:
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - 3176C ATAAC
Net power - 339.3 hp
The measured power @ - 2000 rpm
Displacement - 891
Hole Diameter - 5.4 inches
Stroke - 6.5 inches
Net Power - ISO 9249 - 339 HP
Engine Model - Cat 3406E ATAAC Diesel
Flywheel power - 339 hp
Net Power - EEC 80/1269 - 339 HP
Net power - DIN 70020 - 327 hp
Net Power - SAE J1349 (JAN90) - 339 HP
Operational
Working WeightV63325.6lb
166.5 gallon fuel tank capacity
Tire size - 29.5-5 16PR
Transmission
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 20.6 mph
Max. Speed - Reverse - 22.8 mph
Forward - 1 - 3.8 mph
Forward - 2 - 6.5 miles per hour
Forward - 3 - 11.4 mph
Forward - 4 - 20 miles per hour
Reverse - 1 - 4.3 mph
Reverse - 2 - 7.5 miles per hour
Reverse - 3 - 13 mph
Reverse - 4 - 22.7 mph
Number of speeds forward - 4
Number of reverse speeds - 4
Steering - Steering Angle
Steering - fully hydraulic, power steering
Turning radius - with a straight blade - 24 feet per
Weights
Operating Weight - 63,325 lbs
Tires
Standard tire size - 29.5-25 L-3
Tires - 10 options in addition to the standard offer.
Hydraulic system
Safety Valve Installation - 3,500 psi
Performance of the vane pump at 2000 rpm and 6900 kPa (1000 psi) - 24.5 gal / min
Lifting Cylinder, Hole and Stroke - 120.65 mm x 915 mm 4.75 inches x 36 inches
Steering cylinder, bore and stroke - 114.3 mm x 576 mm 4.5 inches x 22.7 inches
Right tilt and tip, hole and stroke - 152.4 mm x 255 mm 6 in x 10 in
Left tilt and tip, hole and stroke - 133.35 mm x 255 mm 5.25 inches x 10 inches
Blade
Blade Capacity - 6.7yd3
Blade Width - 14.8 Feet in
Blade Height - 4.1 Feet
Axes
Front - planetary fixed
Rear - 13 degrees planetary swing
The brakes
Brakes - comply with OSHA, SAE J1473 DEC84, ISO 2450-1985 standards.
Dimensions
Length with blade on the ground - 27.2 feet in
Tire Width - 14.8 Feet in
Height to Cab Top - 12.14 ft in
Wheelbase - 12.14 feet in
Ground clearance - 1.3 feet in
Service replenishment options
Cooling system - 21.9 gal
Carter - 9gal
23.2 gallon hydraulic tank
Fuel Tank - Standard - 166.5 Gallons
Gearbox - 16.4gal
Differential - Last gear - Front - 23.8gal
Differential - Last gear - Rear - 23.8gal
Taxi
ROPS / FOPS - Meets SAE and ISO standards.
Sound performance
Standards - Complies with ANSI / SAE and ISO.
Blade characteristics
Straight Blade - Capacity - 6.2yd3
Blade volume - 4.67 m3 6.11 m3
Moldboard - Length - 13.8 Feet in
Blade angle - total - 22.4 degrees
Blade angle - forward - 11.2 degrees
Blade angle - back - 11.2 degrees
Blade angle - to the right - 15.2 degrees
Blade angle - left - 15.2 degrees
Maximum Rise Above Ground - 3.5 Feet
Straight Blade - Full Width - 14.8 Feet
Straight Blade - Height - 48.4 Feet
Straight Blade - Digging Depth - 17 ft.
Straight Blade - Ground clearance - 37.6 feet in
Straight Blade - Maximum Tilt - 46.7 Feet