Caterpillar WHEEL-TYPE LOADER 988H - catalog of spare parts
Dimensions *
Ground clearance - 1.8 feet in
Height - Top of Exhaust Pipe - 13.5 Feet
Wheelbase - 15 ft. In
Height - Top of the hood - 10.4 feet in
Height - Top of Air Cleaner - 11.1 ft.
The center line of the rear axle to the edge of the rear bumper is 10.3 feet in
The center line from the front axle to the hitch is 7.5 feet in
C-Pin Height - 3.4 Feet
Digging Depth - 0.8 Feet in
Rack Rear Angle - Ground - 47.8 degrees
The angle of the rear pillar - for carrying - 56.5 degrees
Height - Splashproof - 17.9 ft.
Pin Height - 19.2 Feet in
A-pillar angle - maximum lift - 45 degrees
Height - Cab Top - 13.6 feet in
Ground clearance at maximum lift and unload - 12.8 feet per
Bucket
Discharge clearance at maximum lift - 11.33 feet per
Choose WHEEL-TYPE LOADER 988H section:
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - C18 ACERT
Net power - 501 hp
Gross Power - 555 HP
Measured Power @ - 1800rpm
Displacement - 1104.5 cc
Barrel diameter - 5.7 inches
Stroke - 7.2 inches
Net Power - ISO 9249 - 501 HP
Engine Model - Cat C18 ACERT
Flywheel power - 501 hp
Net Power - ISO 14396 - 540 HP
Gross Power - ISO 3046-2 - 520 HP
Net Power - EEC 80/1269 - 501 HP
Operational
Working Weight - 109,249 lbs
Fuel capacity - 188gal
70.5 gallon hydraulic system capacity
15.9 gallon engine oil capacity
Cooling capacity 27.2 gallons
Transmission fluid capacity - 18.5 gal
The front axle / differential fluid volume is 49 gal
The fluid capacity of the rear axle / differential is 49 gal
Static Tipping Weight - 76,776 lbs
Turn radius - 28 feet in
Operating voltage - 24 V
Generator current strength - 100 amperes
Rear Axle Fluctuation - 26 degrees
Tire size - 35/65
Transmission
The number of forward gears - 4
Number of reverse gears - 3
Top Speed - Forward - 24 Mph
Max. Speed - Reverse - 15.6 mph
Direct Drive - Forward 3 - 13.6 mph
Direct Drive - Reverse 3 - 15.6 mph
Direct Drive - Forward 4 - 24 Mph
Direct Drive - Forward 2 - 7.7 mph
Direct Drive - Reverse 2 - 8.8 mph
Drive Converter - Forward 3 - 12.9 mph
Drive Converter - Reverse 3-14.7 mph
Direct Drive - Forward 1 - Lock Disabled
Drive Converter - Forward 4 - 22.3 mph
Drive Converter - Forward 1 - 4.2mph
Drive Converter - Forward 2 - 7.3 mph
Direct Drive - Reverse 1 - 4.9mph
Drive Converter - Reverse 1 - 4.7mph
Drive Converter - Reversing 2 - 8.4 mph
Steering
Steering - Meets SAE and ISO Standards
The total angle of rotation - 86 degrees
Buckets
Maximum bucket capacity - 10yd3
Bucket capacity - 6.4 m3 - 7.7 m3 8.3 - 3-10 - 3
Hydraulic system
Safety Valve Installation - 4500
Pump productivity - 130 gal / min
Lifting Time - 9.4sec
Dump time - 2.4 sec.
3.8 s less time
Bucket
Breakout Force - 85068 lbs
Unloading clearance at maximum lift - 11.4 feet per
Bucket Width - 12.5 Feet in
Bucket Capacity - Piled - 8.4yd3
Bucket Capacity - Penetrated - 6.9yd3
Dimensions
Length with a bucket on the ground - 40.1 feet in
Tire Width - 11.8 Feet in
Height to Cab Top - 13.5 Feet in
Ground clearance - 1.7 feet in
Wheelbase - 14.9 feet in
Articulated Finger - Maximum Height - 19.2 Feet
Reach at Max Lift and Dump - 6.7 feet in
Operational characteristics
Tipping Load - Direct - 84038 lbs
Mount Type - Cat Quick Coupler
Hinge pin height, no load - 16.2 feet in
Total length - 39.9 feet in
Turn Radius - SAE Carry - 31 ft.
Tipping Load - 37 Degree Swivel - 73826 lbs
Nominal Payload - 27,557.8 lbs
Service replenishment options
Cooling system - 27.2 gal
Fuel tank - 188gal
Crankcase Protection - 15.9 gal
Transmission - 18.5 gal
Differential - Last gear - front - 49gal
Differential - Last gear - Rear - 49gal
Fill Hydraulic Plant - 124.2 gallons
Hydraulic system - tank only - 70.5 gal
Hydraulic cycle time
Rise - 9.4 s
Blade - 2.4 s
Total hydraulic cycle time - 15.6 s
Bottom swimming down - empty - 3.8 s
Taxi
Cab - ROPS / FOPS - Meets SAE and ISO Standards
Sound Performance - Complies with ANSI, SAE, and ISO Standards
Loader hydraulic system
Pressure Relief Valve Installation - 5075 psi
Double acting cylinders - lift, bore and stroke - 220 911 mm 8.7 35.9 inches
Double acting cylinders - tilt, hole and stroke - 220 1770 mm 8.7 69.7
Relief Valve Installation - Low Idle - 348.1 psi
Productivity of the main hydraulic system at rpm 2010 and 6900 kPa (1000 psi) - 130 gallons / min
Pilot system - gear pump capacity at 2.010 rpm and 2500 kPa (363 psi) - 20.1 gallons / min.
Loader Hydraulic System Performance of the main hydraulic system at 2.010 rpm and 6900 kPa (1000 psi) - 130 gal / min