Caterpillar WHEEL-TYPE LOADER 980M - catalog of spare parts
Dimensions
Length with bucket on the ground - 26.17 feet in
Tire Width - 10.83 Feet in
Height to Cab Top - 10.25 Feet in
Wheelbase - 12.5 feet in
Ground clearance - 1.42 feet in
Dimensions - High Lift
Ground clearance - 1.42 feet in
Dimensions - Standard Lift
Ground clearance - 1.42 feet in
Operational characteristics
Note (1) - For the machine configuration defined in the "Weight" section.
Note (2) - Full compliance with ISO 143971: 2007, sections 1 to 6.
Note. Full compliance with the requirements of ISO (2007) 143971, sections 1 to 6, which requires a 2% check between calculations and tests.
Breakout Force - 50,357 lbs
Static Tipping Load - 40 Degree Full Turn - With Tire Deflection - 43,133 lbs
Static Tipping Load - 40 Degree Full Turn - No Tire Deflection - 45,847 lbs
Choose WHEEL-TYPE LOADER 980M section:
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - CAT C13 ACERT
Net power - 378hp
Gross Power - 417 HP
Max. Torque - 1617
Net Power - ISO 9249 - 386 HP
Engine Model - Cat? C13 ACERT?
Note. The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 1.6 kg of refrigerant with a CO2 equivalent of 2.288 metric tons.
Peak Torque - 1,200 rpm - SAE J1995 - 1,627 lb-ft
Peak Torque - 1200 rpm - ISO 14396 - 1609 lb-ft
Maximum net power - 1700 rpm - ISO 9249 - 386 hp
Maximum Net Torque - 1,100 rpm - 1,515 lb-ft
Maximum power - 1700 rpm - ISO 14396 - 420 hp
Maximum power - 1700 rpm - ISO 14396 - Metric - 426 hp
Maximum net power - 1700 rpm - ISO 9249 - Metric - 392 hp
Maximum net power - 1700 rpm - SAE J1349 - 386 hp
Maximum net power - 1700 rpm - SAE J1349 - Metric - 392 hp
Maximum power - 1700 rpm - SAE J1995 - 425 hp
Maximum power - 1700 rpm - SAE J1995 - Metric - 431 hp
Maximum Net Torque - 1,000 rpm - 1,505 lb-ft
Maximum power - 1800 rpm - ISO 14396 - 406 hp
Maximum power - 1800 rpm - ISO 14396 - Metric - 412 hp
Maximum power - 1800 rpm - SAE J1995 - 412 hp
Maximum power - 1800 rpm - SAE J1995 - Metric - 417hp
Peak Torque - 1300 rpm - SAE J1995 - 1617 lb-ft
Maximum net power - 1800 rpm - ISO 9249 - 373 hp
Maximum net power - 1800 rpm - SAE J1349 - 373 hp
Maximum net power - 1800 rpm - ISO 9249 - Metric - 378 hp
Maximum net power - 1800 rpm - SAE J1349 - Metric - 378 hp
Peak Torque - 1300 rpm - ISO 14396 - 1602 lb-ft
US EPA Tier 4 Final / EU Stage IV - Maximum Power - SAE J1995 - 425 HP
Level 2 / Level II, Level 3 / Level IIIA Equivalent: Maximum power - SAE J1995 - 412 hp
Operational
Working Weight - 66,337 lbs
Fuel tank capacity - 112.5 gal
Hydraulic Capacity 40 Gallons
Cooling system capacity - 12 gal
Transmission Fluid Capacity - 20.3 Gallons
The front axle / differential fluid volume is 22 gal
The fluid capacity of the rear axle / differential is 22 gal
Transmission
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 24.5 mph
Max. Speed - Reverse - 24.5 mph
Forward - 1 - 4.3 mph
Ahead - 2 - 8.3 mph
Forward - 3 - 14.6 mph
Forward - 4 - 24.5 mph
Note. Maximum speed in a standard car with an empty bucket and standard L4 tires with a roll radius of 933 mm (37 inches).
Reverse - 1 - 4.8 mph
Reverse - 2 - 9.4 mph
Reverse - 3 - 16.7 km / h
Reverse - 4 - 24.5 mph
Weights
Working Weight - 66,337 lbs
The note
Weight depending on machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, fenders on the road, Product Link ?, Open differential axles, secondary steering, noise reduction and 5.4 m3 (7 , 1 cube) GP bucket with BOCE.
Note (1) - For general purpose buckets with a volume of 5.4 m3 (7.1 cubic feet) with BOCE.
Note (2) - Weight depending on machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, fenders on the road, Product Link, open differential axles (front / rear), secondary steering, noise reduction and 5, 4 m3 (7.1 yd3) universal bucket with BOCE.
Buckets
Bucket volume - 4.2-12.2 m3 (5.25-16.0 m3)
Hydraulic system
Pressure Relief Valve Installation - 4975
Pump productivity - 119 gal / min
Hydraulic cycle time - total - 10.1 s
Aggregate System - Maximum Operating Pressure - 4975 psi
Unit pump type - variable displacement piston
Aggregate system - maximum pump capacity at 2250 rpm - 119 gal / min
Aggregate system - optional 3rd maximum flow rate - 63 gal / min
Implement System - Optional 3rd Function Maximum Pressure - 3,159 psi
Hydraulic cycle time - rated payload - rise from transport position - 5.3 s
Hydraulic cycle time - nominal payload - dump, at maximum lift - 1.7 s
Hydraulic Cycle Time - Rated Payload - Lower, Empty, Lower - 3.1 s
Hydraulic Cycle Time - Rated Payload - Total - 10.1 s
Axes
The back is hesitant? 13 degrees
The maximum rise and fall of one wheel - 22.5 inches
the brakes
Brakes - Brakes comply with ISO 3450: 2011
Dimensions
Length with bucket on the ground - 26.2 feet in
Tire Width - 10.9 Feet in
Height to Cab Top - 10.3 ft.
Ground clearance - 1.5 feet in
Wheelbase - 12.5 feet in
Service replenishment options
Cooling system - 14 gal
Fuel tank - 112.5 gal
Carter - 9.8 gal
DEF Tank - 5.5 gal
Hydraulic tank - 40gal
Transmission - 20.3 gal
Differential - Last gear - forward - 22gal
Differential - Last gear - Rear - 22gal
Sound
Note (1) - * Distance 15 m (49.2 ft), forward movement on the second gear ratio.
Note (2) - ** For machines in the countries of the European Union and in countries that adopt the EU Directives.
Note (3) - *** European Union Directive? 2000/14 / EU? as amended? 2005/88 / EC.?
The note
* Distance 15 m (49.2 ft), forward movement on the second gear ratio.
With the maximum value of the cooling fan speed - the sound pressure level of the operator (ISO 6396: 2008) - 75 dB (A)
The maximum value of the cooling fan rotation speed is the level of external sound power (ISO 6395: 2008) - 112 dB (A)
Maximum cooling fan rotation speed - external sound pressure level (SAE J88: 2013) - 78 dB (A) *
At a cooling fan speed of 70% of the maximum value, the sound pressure level of the operator (ISO 6396: 2008) ** - 72 dB (A)
At a cooling fan speed of 70% of the maximum value, the level of external sound power (ISO 6395: 2008) ** - 109 LWA ***
Taxi
ROPS / FOPS - ROPS / FOPS comply with ISO 3471: 2008 and ISO 3449: 2005 Level II
Bucket capacity
Bucket Range - 4.2-12.2 m (5.25-16.0 yards)
Dimensions - High Lift
Height - Top Hood - 10.3 feet in
Height - Top of the exhaust pipe - 12.4 feet to
Height - Top ROPS - 12.6 feet to
Ground clearance - 1.5 feet to
Center line from rear axle to counterweight edge - 8.2 feet to
Center line from rear axle to hitch - 6.3 feet to
Wheelbase - 12.5 feet in
Total length - without bucket - 26.9 feet in
Hinge pin height at maximum lift - 15.6 feet in
Lift clearance at maximum lift - 13.1 feet in
Stand back - maximum lift - 61 degrees
Stand back - bearing height - 48 degrees
Stand back on the ground - 39 degrees
Tread width - 8 feet in
The note - All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Hinge axis height when carrying - 2.3 feet to
Maximum width over tires - 10.9 feet in
Dimensions - Standard Lift
Height - Top Hood - 0.3 feet in
Height - Top of the exhaust pipe - 12.4 feet to
Height - Top ROPS - 12.6 feet to
Ground clearance - 1.5 feet to
Center line from rear axle to counterweight edge - 8.2 feet to
Center line from rear axle to hitch - 6.3 feet to
Wheelbase - 12.5 feet in
Total length - without bucket - 26.2 ft in
Hinge pin height at maximum lift - 14.9 feet in
Lift clearance at maximum lift - 12.5 feet in
Stand back - maximum lift - 61 degrees
Stand back - bearing height - 48 degrees
Stand back on the ground - 40 degrees
Tread width - 8 feet in
The note - All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Hinge axis height when carrying - 2.1 feet in
Maximum width over tires - 10.9 feet in
Engine - Level 3 / Stage IIIA Equivalent
Emissions - Level 3 / Stage IIIA
Engine - Tier 4 Final / Stage IV
Emissions - Cat engine with ACERT technology? Meets Level 4 Final / Stage IV standards.
Engineering model - Cat C13 ACERT
Maximum Net Power - 1,700 rpm - SAE J1349 - 386hp
Peak Torque - 1200 rpm - SAE J1995 - 1,627 pounds
boring - 5.2in
Stroke - 6.2in
Displacement - 763cu in
Note (1) - The power values apply at the indicated speed when tested under standard conditions for the specified standards.
Note (2) - The declared net power is the power available on the flywheel when the engine is equipped with a fan, an alternator, an air cleaner, and additional processing.
Note (3) - Total declared power - with a fan at maximum speed.
Maximum Net Torque - 1,100 rpm - SAE J1349 - 1515 pounds
Maximum power - 1700 rpm - SAE J1995 - 425hp -
Engine - Level 2 / Level II, Level 3 / Equivalent to Level IIIA
Engineering model - Cat C13 ACERT
Maximum power - 1800 rpm - SAE J1995 - 417hp
Maximum Net Power - 1800 rpm - SAE J1349 - 373hp
Peak Torque - 1300 rpm - SAE J1995 - 1,617 pounds
Maximum Net Torque - 1000 rpm - SAE J1349 - 1,505 pounds
Boring - 5.2in
Stroke - 6.2in
Displacement - 763cu in
Emissions
Cat engine with ACERT technology? Meets Tier 2 / Stage II, Tier 3 / Stage IIIA emission standards.
Sound - Level 2 / Level II, Level 3 / Equivalent to Level IIIA
Operator sound pressure level - ISO 6396: 2008 - 75 dB (A)
External sound power level - ISO 6395: 2008 * - 112 dB (A)
External Sound Pressure Level - SAE J88: 2013 ** - 78 dB (A)
Note (1)
The indicated sound values are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.
Note (2)
* For a standard machine configuration, measured in accordance with the procedures indicated at the maximum cooling fan speed.
Note (3)
** For standard machine configuration, measured in accordance with specified procedures. The measurements were carried out under the following conditions: a distance of 15 m (49.2 ft), forward movement on the second gear ratio with a maximum cooling fan speed.
Sound - Level 4 Final / Stage IV
Note (1) - The indicated sound values are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.
Operator sound pressure level - ISO 6396: 2008 - 72 dB (A)
External sound power level - ISO 6395: 2008 * - 112 dB (A)
External Sound Pressure Level - SAE J88: 2013 ** - 78 dB (A)
Note (2) - * For a standard machine configuration, measured in accordance with the procedures indicated at maximum cooling fan speed
Note (1)
The indicated sound values are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.
Note (2)
* For a standard machine configuration, measured in accordance with the procedures indicated at the maximum cooling fan speed.
Note (3)
** For standard machine configuration, measured in accordance with specified procedures. The measurements were carried out under the following conditions: a distance of 15 m (49.2 ft), forward movement on the second gear ratio with a maximum cooling fan speed.
Sound - Level 4 Final / Stage IV
Note (1)
The indicated sound values are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.
Operator sound pressure level - ISO 6396: 2008 - 72 dB (A)
External sound power level - ISO 6395: 2008 * - 112 dB (A)
External sound pressure level - SAE J88: 2013 ** - 78 dB (A)
Note (2)
* For a standard machine configuration, measured in accordance with the procedures indicated at the maximum cooling fan speed.
Note (3)
** For standard machine configuration, measured in accordance with specified procedures. The measurements were carried out under the following conditions: a distance of 15 m (49.2 ft), forward movement on the second gear ratio with a maximum cooling fan speed.