Caterpillar WHEEL-TYPE LOADER 980H - catalog of spare parts
Dimensions
Length with bucket on the ground - 31.08 feet in
Tire Width - 10.58 Feet in
Height to Cab Top - 12.35 ft.
Wheelbase - 12.17 feet in
Ground clearance - 1.45 feet in
Articulated finger - maximum height - 14.78 feet in
Reach at Max Lift and Dump - 5.08 feet in
bucket
Discharge clearance at maximum lift - 10.83 feet per
Choose WHEEL-TYPE LOADER 980H section:
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - C15 ACERT
Net power - 318 hp
Gross Power - 355 HP
Measured Power @ - 1800rpm
Displacement - 928cu per
Max. Torque - 1191
Hole Diameter - 5.4 inches
6.8 inch travel
Net Power - ISO 9249 - 349 HP
Net Power - SAE J1349 - 349 HP
Net Power - 80/1269 / EEC - 353 HP
Gross Power - SAE J1995 - 393 HP
Engine Model - Cat? C15 ACERT?
Peak Torque - 1,200 rpm - Net - 1,244 lb-ft
operational
Working Weight - 66489.3 lbs
Fuel capacity - 127gal
Hydraulic system capacity - 66 gal
Engine oil volume - 10 gal
Cooling system capacity - 22 gal
Transmission fluid capacity - 16 gal
Front Axle / Differential Fluid Volume 23 Gallons
The fluid capacity of the rear axle / differential - 23gal
Static Tipping Weight - 50201 lbs.
Turn radius - 26.1 feet in
Operating voltage - 24 V
Generator current strength - 80 amperes
Rear Axle Fluctuation - 26 degrees
Tire size - 29.5-25
Transmission
Transmission Type - Powershift
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 22.6 Mph
Max. Speed - Reverse - 25.8 mph
Forward - 1 - 4.1 mph
Forward - 2 - 7.3 miles per hour
Forward - 3 - 12.9 mph
Forward - 4 - 22.6 miles per hour
Reverse - 1 - 4.7 mph
Reverse - 2 - 8.4 mph
Reverse - 3 - 14.7 mph
Reverse - 4 - 25.8 mph
Weights
Working Weight - 67,294 lbs
Tires
Tires - Choose from a variety of tires to suit your application.
Buckets
Maximum bucket capacity - 8yd3
Bucket capacity - 3.8-6.1 m? 5.0-8.0 yards?
Bucket Width - 11.6 Feet in
Capacity - Reference Bucket - 5.5yd3
Type - Reference bucket - GP with teeth
Breakout Force - Base Bucket - 61372.9 lbs
Hydraulic system
Pump Type - Gear
Safety Valve Installation - 3000
Pump productivity - 123 gal / min
Lifting Time - 6sec
Dump time - 2.1 sec.
Shorter time - 3.4 s
Hydraulic cycle time - total - 11.5 s
Hydraulic cycle time - lowering, emptying, lowering - 3.4 s
Hydraulic cycle time - increase - 6 s
Pilot system - pump capacity - 122.58 gal / min
Bucket / Tool System - Relief Valve Setting - 3,000 psi
Hydraulic Cycle Time - Dump - 2.1 s
Bucket / Tool System - Pump Capacity - 123 Gal / min
bucket
Breakout Power - 61425 pounds
Dump clearance at maximum lift - 10.9 feet per
Bucket Width - 11.6 Feet in
Bucket Capacity - Bulked - 5.5yd3
Bucket Capacity - Breakdown - 4.8yd3
Dimensions
Length with bucket on the ground - 31.1 feet in
Tire Width - 10.6 Feet in
Height to Cab Top - 12.4 Feet in
Ground clearance - 1.5 feet in
Wheelbase - 12.2 feet in
Articulated Finger - Maximum Height - 14.8 Feet
Reach at Max Lift and Dump - 5.1 feet in
Wheelbase - 12.2 feet in
Height - Top ROPS - 12.4 Feet
Height - Top of Exhaust Pipe - 146.3 inches
Centerline of rear axle to hitch - 72.9 inches
Height - Top Hood - 107 Inches
Pin Height - Standard - 14.8 Feet
The center rear axle to the edge of the counterweight is 8.2 feet in
Operational characteristics
Static Tipping Load - Full Turn - 42989lb
Dumping - 10,843.2 ft in
Separation force - 44775lb
Service replenishment options
Cooling system - 22gal
carter - 17gal
Hydraulic tank - 33gal
Hydraulic system - including tank - 66gal
Fuel tank - standard - 127gal
Transmission - 16gal
Differential - Final Drives - Front - 23gal
Differential - Last gear - Rear - 23gal
Taxi
ROPS / FOPS - Conforms to SAE and ISO standards.