9X2046	Screw Truss Head	Caterpillar	View
6V9829	Cap A	Caterpillar	View
3398810	Insert	Caterpillar	View
5P0537	Flat Washer, Phosphate and Oil Coated	Caterpillar	View
3508694	Motor Gp Ele	Caterpillar	View
3440641	Atomizer Gp	Caterpillar	View
2916692	Ferrule	Caterpillar	View
6V8378	Nut	Caterpillar	View
3587834	Tube As	Caterpillar	View
0L0723	Washer	Caterpillar	View
6V9873	Connector	Caterpillar	View
5P7469	Clip	Caterpillar	View
2407356	Kit Seal	Caterpillar	View
1773463	Connector As	Caterpillar	View
7X3229	Film Identification	Caterpillar	View
1381509	Ecology Drain Gp	Caterpillar	View
3479445	Manifold Exh	Caterpillar	View
5P5637	Seal	Caterpillar	View
5P4571	Terminal	Caterpillar	View
3534688	Filter Gp Oil	Caterpillar	View
2901262	Cushion As	Caterpillar	View
3582283	Housing Fly	Caterpillar	View
9X1813	Sleeve	Caterpillar	View
1085157	Valve	Caterpillar	View
9X7378	Oring	Caterpillar	View
2443602	Cat Hydraulic Cylinder Head	Caterpillar	View
6V8981	Elbow	Caterpillar	View
1619289	Block Slider	Caterpillar	View
3402580	Hinge As	Caterpillar	View
3576975	Tube As Fuel	Caterpillar	View
7X2552	Hex Head Bolts, Zinc Flake	Caterpillar	View
1666323	Race	Caterpillar	View
1V8852	Cap	Caterpillar	View
2433544	Visor As	Caterpillar	View
5P8362	Nut	Caterpillar	View
1P4578	Cat Sintered Metal Flange	Caterpillar	View
5P8250	Flat Washer, Phosphate and Oil Coated	Caterpillar	View
6V9170	Nut Bulkhead	Caterpillar	View
7G2951	Clip	Caterpillar	View
7X7900	Hex Head Bolts, Zinc Flake	Caterpillar	View
4T1859	Rod	Caterpillar	View
1359356	J Series (side pin) Adapter	Caterpillar	View
1851861	Seal Wire	Caterpillar	View
7X0818	Hex Head Bolts, Zinc Flake	Caterpillar	View
6V8635	Connector	Caterpillar	View
2965270	Sensor Gp Pressure	Caterpillar	View
3511853	Seat Gp C	Caterpillar	View
6E1637	Shim	Caterpillar	View
2959888	Hydraulic Cylinder Seal Kit	Caterpillar	View
1343080	Pin	Caterpillar	View
3717099	Bracket	Caterpillar	View
4P7428	Clip	Caterpillar	View
8P6364	Plug	Caterpillar	View
3531634	Bluetooth Harness	Caterpillar	View
3461069	Plate As	Caterpillar	View
3474734	Clip	Caterpillar	View
1862517	Gear Ring	Caterpillar	View
2916695	Nut	Caterpillar	View
3611698	Pin	Caterpillar	View
3540351	Plate	Caterpillar	View

Specifications

engine

Displacement - 568cu per

Boredom - 4.6in

Stroke - 5.9 inches

Net Power - ISO 9249 - 276 HP

Engine Model - Cat? C9.3 ACERT?

The note

The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 1.6 kg of refrigerant with a CO2 equivalent of 2.288 metric tons.

Peak Torque - 1,200 rpm - SAE J1995 - 1,179 lb-ft

Peak Torque - 1200 rpm - ISO 14396 - 1166 lb-ft

Maximum net power - 1700 rpm - ISO 9249 - 276 hp

Maximum net power - 1700 rpm - ISO 9249 - Metric - 280 hp

Maximum net power - 1700 rpm - SAE J1349 - 276 hp

Maximum net power - 1700 rpm - SAE J1349 - Metric - 280hp

Maximum Net Torque - 1,000 rpm - 1,126 lb-ft

Maximum power - 1800 rpm - ISO 14396 - 307 hp

Maximum power - 1800 rpm - ISO 14396 - Metric - 311 hp

Maximum power - 1800 rpm - SAE J1995 - 311 hp

Maximum power - 1800 rpm - SAE J1995 - Metric - 315 hp

Maximum Gross Power - SAE J1995 - 311 HP

Maximum net power - SAE J1349 - 276 hp

Maximum apparent power - 1800 rpm - SAE J1995 - 311 hp

Maximum Net Torque - 1000 rpm - SAE J1349 - 1126 lb-ft

Transmission

Forward - 1 - 4 miles per hour

Forward - 2 - 8.1 mph

Forward - 3 - 14.6 mph

Forward - 4 - 24.9 mph

The note

Maximum speed in a standard vehicle with an empty bucket and standard L3 tires with a roll radius of 826 mm (32.5 inches).

Reverse - 1 - 4.4 mph

Reverse - 2 - 8.9 mph

Reverse - 3 - 16.1 mph

Reverse - 4 - 24.9 mph

Weights

Operating Weight - 51,176 lbs.

The note

Weight depending on machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, wing wings, Product Link ?, Manual differential lock / open axles (front / rear), powertrain protection, secondary steering, noise reduction and general purpose bucket of 4.2 m3 (5.5 cubic feet) with BOCE.

Buckets

Bucket capacity - 2.5-9.2 m? (3.25-12.0 yard?)

Hydraulic system

Hydraulic cycle time - total - 10.1 s

Aggregate System - Maximum Operating Pressure - 4496 psi

Unit pump type - variable displacement piston

Unit system - maximum pump capacity at 2200 rpm - 95 gal / min

Hydraulic cycle time - rated payload - rise from transport position - 6.1 s

Hydraulic cycle time - nominal payload - dump, at maximum lift - 1.4 s

Hydraulic Cycle Time - Rated Payload - Lower, Empty, Lower - 2.6 s

Hydraulic Cycle Time - Rated Payload - Total - 10.1 s

Aggregate system - option 3rd / 4th function Maximum flow - 69 gal / min

Implement System - Option 3rd / 4th Function Maximum Pressure - 3,000 psi

Operational characteristics

Note (1) - For the machine configuration defined in the "Weight" section.

Note (2) - Full compliance with ISO 143971: 2007, sections 1 to 6, which requires a 2% check between calculations and tests.

The strength of the gap - 38,984 pounds

Static Tipping Load - 37 Degree Full Turn - Tire Deflection - 32,329 lbs

Static Tipping Load - 37 Degree Full Turn - No Tire Deflection - 34,873 lbs

Sound

Note (1)

These sound values are for specific operating conditions only.

Note (2)

Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan.

Note (3)

Hearing protection may be necessary when the machine is operated with a cab that is not properly serviced.

The note

* Distance 15 m (49.2 ft), forward movement on the second gear ratio.

At maximum cooling fan speed - Sound pressure level of the operator (ISO 6396: 2008) - 70 dB (A)

The maximum value of the cooling fan rotation speed is the level of external sound power (ISO 6395: 2008) - 109 dB (A)

With maximum cooling fan rotation speed - external sound pressure level (SAE J88: 2013) - 76 dB (A) *

At a cooling fan speed of 70% of the maximum value - the sound pressure level of the operator (ISO 6396: 2008) ** - 69 dB (A)

At a cooling fan speed of 70% of the maximum value, the level of external sound power (ISO 6395: 2008) ** - 108 LWA ***

External sound power level - ISO 6395: 2008 - 109 dB (A)

External Sound Pressure Level - SAE J88: 2013 - 76 dB (A)

Operator sound pressure level - ISO 6396: 2008 - 70 dB (A)

Note (4) - Hearing protection may also be required if doors and / or windows are open for extended periods or in noisy environments.

Taxi

ROPS / FOPS - ROPS / FOPS comply with ISO 3471 and ISO 3449 Level II

Bucket capacity

Bucket range - 3.20-7.40 m (4.19-9.68 m)

Dimensions - High Lift

Height - Top Hood - 9.3 Feet in

Height - Top of Exhaust Pipe - 11.6 Feet

Height - Top ROPS - 11.8 feet in

Ground clearance - 1.5 feet in

The center line from the rear axle to the edge of the counterweight is 8.2 feet in

Centerline of rear axle to hitch - 5.9 ft.

Wheelbase - 11.7 feet in

Total length - without bucket - 26.6 feet in

Hinge axis height at maximum lift - 15.8 ft.

Lift clearance at maximum lift 13.6 ft.

Stand back - maximum lift - 71 degrees

Stand back - bearing height - 49 degrees

Stand back on the ground - 39 degrees

Tread Width - 7.4 Feet in

Note. All dimensions are approximate and are for L3 XHA2 tires.

Hinge axis height when carrying - 2.6 feet in

Maximum Width Over Tires - 9.9 Feet in

Dimensions - Standard Lift

Height - Top Hood - 9.3 Feet in

Height - Top of Exhaust Pipe - 11.6 Feet

Height - Top ROPS - 11.8 feet in

Ground clearance - 1.5 feet in

The center line of the rear axle to the edge of the counterweight is 7.2 feet in

Centerline of rear axle to hitch - 5.9 ft.

Wheelbase - 11.7 feet in

Total Length - Without Bucket - 24 Feet

Hinge axis height at maximum lift - 14 ft.

Lifting arm clearance at maximum lift - 12 ft.

Stand back - maximum lift - 62 degrees

Stand back - bearing height - 50 degrees

Stand back on the ground - 42 degrees

Tread Width - 7.4 Feet in

Note. All dimensions are approximate and are for L3 XHA2 tires.

Hinge axis height when carrying - 2.1 feet in

Maximum Width Over Tires - 9.9 Feet in

Engine - Level 3 / Stage IIIA Equivalent

Emissions - Level 3 / Stage IIIA

Engine - Tier 4 Final / Stage IV

Emissions - Level 4 / Stage IV