Caterpillar WHEEL-TYPE LOADER 962H - catalog of spare parts
Dimensions
Length with bucket on the ground - 26.8 feet in
Tire Width - 9.2 Feet in
Cab Height - 11.4 Feet
Ground clearance - 1.4 feet in
Wheelbase - 11 ft. In
Articulated Finger - Maximum Height - 13.1 Feet
Reach in Max Lift and - Dump - 4.3 feet in
Wheelbase - 11 ft. In
Height - Top ROPS - 11.4 Feet
Height - Top of the tailpipe - 132.6 inches
Centerline of rear axle to hitch - 66 inches
Height - Top Hood - 97 Inches
Pin Height - Standard - 13.1 ft.
Centerline rear axle to counterweight edge - 6.5 ft.
Bucket
Ground clearance in Max Raise - 9.25 feet in
Choose WHEEL-TYPE LOADER 962H section:
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - C7 ACERT
Net power - 211 hp
Gross Power - 230hp
Measured Power @ - 1800rpm
Displacement - 439cu in
Max. Torque - 669
Boredom - 4.4 inches
Stroke - 5 inches
Net Power - ISO 9249 - 211 HP
Net Power - SAE J1349 - 209 HP
Net Power - 80/1269 / EEC - 211 HP
Gross Power - SAE J1995 - 230hp
Engine Model - Cat? C7 ACERT?
Flywheel power - 211 hp
Peak Torque - 1,400 rpm - Net - 669 lb-ft
Operational
Operating Weight - 42,700 lbs
Fuel tank capacity - 83 gal
Hydraulic system capacity - 29 gal
7.9 gallon engine oil
Cooling system capacity - 11 gal
Transmission fluid capacity - 9 gal
Front axle / differential fluid volume - 9.5 gal
Rear axle / different fluid capacity - 9.5 gal
Static Tipping Weight - 30,603 lbs.
Turn radius - 23.4 feet in
Operating voltage - 24 V
Generator current strength - 80 amperes
Rear Axle Fluctuation - 26 degrees
Tire size - 23.5R25
Transmission
Transmission Type - Powershift
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 23.6 mph
Max. Speed - Reverse - 24.9 mph
Forward - 1 - 4.4 mph
Forward - 2 - 8.1 mph
Forward - 3 - 14 miles per hour
Forward - 4 - 23.6 mph
Reverse - 1 - 4.7 mph
Reverse - 2 - 8.6 mph
Reverse - 3 - 15.2 mph
Reverse - 4 - 24.9 mph
Weights
Operating Weight - 42,700 lbs
Tires
Tires - Choose from a variety of tires to suit your application.
Buckets
Maximum bucket capacity - 5yd3
Bucket volume - 2.7-3.8 m3, 3.5-5.0 cubic meters.
Bucket Width - 9.9 Feet in
Capacity - Reference Bucket - 3.6yd3
Type - Reference bucket - GP
Breakout Force - Base Bucket - 40,465.6 lbs.
Hydraulic system
Type of pump - piston
Safety Valve Installation - 1000
Pump productivity - 71 gal / min
Lifting time - 6.2 sec.
Dump time - 1.3 sec.
Shorter time - 2.5 s
Hydraulic cycle time - total - 10 s
Hydraulic cycle time - lowering, emptying, lowering - 2.5 s
Hydraulic Cycle Time - Increase - 6.2 s
Hydraulic cycle time - dump - 1.3 s
Steering System - Pump Type - Piston
Bucket / Tool System - Pump Capacity - 71 gallons / min
Bucket
Breakout Force - 33075 lbs
Dump clearance at maximum lift - 9.3 feet per
Bucket Width - 9.7 Feet in
Bucket Capacity - Bulk - 4.5yd3
Bucket Capacity - Penetrated - 3.9yd3
Axes
Front - Fixed Front
The back is oscillating +/- 13?
The maximum rise and fall of one wheel - 18.5 inches
The brakes
Brakes - meets the requirements of the standards.
Dimensions
Length with a bucket on the ground - 26.75 ft in
Width above tires - 9.17 feet in
Height to cab top - 11.33 feet in
wheelbase - 11 feet in
Ground clearance - 1.35 ft to
Articulated finger - maximum height - 13.08 ft in
Reach for Max Lift and Dump - 4.25 ft in
Operational characteristics
Static Tipping Load - Full Turn - 26,676 lbs
Breakout Force - 33075 lbs
Service replenishment options
Cooling system - 11 gal
Carter - 7.9 gal
Hydraulic tank - 29gal
Fuel tank - standard - 83 gal
Transmission - 9gal
Differential - Latest gears - Forward - 9.5gal
Differential - Last gear - Rear - 9.5gal
Taxi
ROPS / FOPS - Meets SAE and ISO standards.