Caterpillar WHEEL-TYPE LOADER 950 GC - catalog of spare parts
Dimensions
Ground clearance - 1.5 feet in
Wheelbase - 10.9 feet in
Height - Top ROPS - 11.4 Feet
Height - Top of the tailpipe - 134.1 inches
The center line of the rear axle to the edge of the counterweight is 81 inches
Centerline of rear axle to hitch - 65.1 inches
Height - Top Hood - 105 Inches
The note - All dimensions are approximate and based on MAXAM MS302 23.5R25 L3 radial tires.
Pin Height - 13.8 Feet in
Stand back - maximum lift - 60 degrees
Rack Back - Carry - 45 degrees
Stand back - ground - 40 degrees
Lift clearance - 12 feet in
Choose WHEEL-TYPE LOADER 950 GC section:
Specifications
engine
Displacement - 428cu per
Hole Diameter - 4.2 inches
Stroke - 5.4 inches
Net Power - ISO 9249 - 225 HP
Engine Model - Cat C7.1 ACERT
Peak Torque - 1,400 rpm - SAE J1995 - 811 lb-ft
Peak Torque - 1,400 rpm - ISO 14396 - 805 lb-ft
Maximum net power - 1700 rpm - ISO 9249 - 225 hp
Maximum power - 1700 rpm - ISO 14396 - 240 hp
Maximum power - 1700 rpm - ISO 14396 - Metric - 243 hp
Maximum net power - 1700 rpm - ISO 9249 - Metric - 228 hp
Maximum net power - 1700 rpm - SAE J1349 - 225 hp
Maximum power - 1700 rpm - SAE J1995 - 241 hp
Operational
Operating Weight - 41,554 lbs
Transmission
Forward - 1 - 4.5 miles per hour
Forward - 2 - 8 miles per hour
Forward - 3 - 14.2 mph
Forward - 4 - 22.4 mph
The note
Maximum speed in a standard vehicle with an empty bucket and standard L3 tires with a roll radius of 760 mm (30 inches).
Reverse - 1 - 4.5 mph
Reverse - 2 - 8 mph
Reverse - 3 - 14.2 mph
Weights
Operating Weight - 41,554 lbs
Buckets
Bucket capacity - 2.9-4.4 m (3.75-5.75 m)
Hydraulic system
Steering System - Pump Type - Piston
Unit system - maximum pump capacity at 2,390 rpm - 68 gal / min
Unit System — Maximum Operating Pressure at 50 +/- 1.5 L / min (13.2 + 0.4 gal / min) - 4047 psi Inch
Hydraulic Cycle Time - Total Cycle Time - 9.4 s
Service replenishment options
Cooling system - 13.2gal
Crankcase Protection - 4.8 gal
DEF Tank - 4.2gal
Hydraulic tank - 29.6 gal
Transmission - 11.9gal
Differential - Latest gears - Forward - 10.6gal
Differential - Last gear - Rear - 10gal
76.6 gallon fuel tank size
Sound
Note (1)
* Distance 15 m (49.2 ft), forward movement on the second gear ratio.
Note (2)
** For machines in the countries of the European Union and in countries that adopt the EU Directives.
Note (3)
*** European Union Directive "2000/14 / EC" as amended by "2005/88 / EC".
At maximum cooling fan speed - Operator sound pressure level (ISO 6396: 2008) - 73 dB (A)
The maximum value of the cooling fan rotation speed is the level of external sound power (ISO 6395: 2008) - 109 dB (A)
With maximum cooling fan rotation speed - external sound pressure level (SAE J88: 2013) - 76 dB (A) *
At a cooling fan speed of 70% of the maximum value - the sound pressure level of the operator (ISO 6396: 2008) ** - 73 dB (A)
At a cooling fan speed of 70% of the maximum value, the level of external sound power (ISO 6395: 2008) ** - 107 LWA ***
At a cooling fan speed of 70% of the maximum value, the sound pressure level of the operator (ISO 6396: 2008) is 73 dB (A)
With maximum cooling fan speed Note
15 m (49.2 ft) distance, forward on the second gear ratio.
At a cooling fan speed of 70% of the maximum value: Note (1)
For machines in the countries of the European Union and in countries that adopt the EU Directives
At a cooling fan speed of 70% of the maximum value: Note (2)
European Union Directive "2000/14 / EC" as amended by "2005/88 / EC".
Engine - Tier 4 Final / Stage IV
Emissions - Level 4 / Stage IV
Weight and performance
Tipping Load - Full Turn - ISO 14397-1 * - 24,264 lbs.
Tipping Load - Full Turn - Hard Tires ** - 25,875 lbs
Breakout Force - 34,638 lbs
Note (1)
For 3.1 m3 (4.0 yd3) universal buckets with BOCE. Weight depending on machine configuration with MAXAM MS302 23.5R25 L3 radial tires, full fluids, operator, standard counterweight, cold start, wings on the road, Product Link, secondary steering, noise reduction.
Note (2)
* Full compliance with ISO (2007) 14397-1, sections 1 to 6, which requires a 2% check between calculations and tests.
Note (3)
** Compliance with ISO (2007) 14397-1, sections 1 to 5.