Caterpillar WHEEL-TYPE LOADER 938G II - catalog of spare parts
Bucket
Unloading clearance at maximum lift - 9.48 feet per
Dimensions
Length with bucket on the ground - 23.56 feet in
Tire Width - 8.37 ft.
Height to Cab Top - 10.86 Feet in
Wheelbase - 9.91 feet in
Ground clearance - 1.35 feet in
Articulated Finger - Maximum Height - 12.61 Feet
Reach at Max Lift and Dump - 3.21 feet in
Choose WHEEL-TYPE LOADER 938G II section:
Specifications
engine
Engine make - 2236
Engine Model - 3126B HEUI
Gross Power - 179.7 HP
Displacement - 439.4 cubic meters.
Max. Torque - 618.9
Torque increase - 62%
Aspiration - Turbocharged
Operational
Working Weight - 30818.5 lbs.
The capacity of the fuel tank is 67.1 gal
Hydraulic Capacity 23.8 Gallons
Engine oil capacity - 8.2 gal
Cooling system capacity - 12.7 g
Transmission fluid capacity - 8 gal
The front axle / differential fluid volume is 8 gal
The fluid capacity of the rear axle / differential is 8.5gal
Static Tipping Weight - 25,229.8 lbs.
Turn radius - 19.6 feet in
Operating voltage - 24 V
Generator current strength - 50 amperes
Rear Axle Fluctuation - 24 degrees
Tire size - 20.5R25
Transmission
Transmission Type - Electronic Planetary Gearbox
The number of forward gears - 4
Number of reverse gears - 3
Top Speed - Forward - 24.2 mph
Max. Speed - Reverse - 14.5 mph
Hydraulic system
Pump Type - Vane Type
Safety Valve Installation - 3597
Pump productivity - 43.1 gal / min
Lifting Time - 6sec
Dump Time - 1.4sec
Shorter time - 2.8 s
Bucket
Breakout Power - 28,326 pounds
Unloading clearance at maximum lift - 9.5 feet per
Bucket Width - 8.9 Feet in
Bucket Capacity - Bulk - 3.1yd3
Bucket Capacity - Pierced - 2.7yd3
Dimensions
Length with bucket on the ground - 23.6 feet in
Tire Width - 8.4 Feet
Height to Cab Top - 10.9 Feet in
Ground clearance - 1.4 feet in
Wheelbase - 10 ft. In
Articulated Finger - Maximum Height - 12.7 Feet
Reach in Max Lift and Dump - 3.3 feet in