3852754	Coupling Tor	Caterpillar	View
3603258	Bckt Gp*Puy	Caterpillar	View
1597457	Metallic Friction Disc	Caterpillar	View
3B4505	Lockwasher	Caterpillar	View
3817963	Tube As	Caterpillar	View
3898060	Medium to High Pressure Tough Guard Hydraulic Hose Assembly	Caterpillar	View
2895150	Sleeve	Caterpillar	View
3712400	Hk Gp*P Y	Caterpillar	View
8C5608	Spacer	Caterpillar	View
1913030	Bolt	Caterpillar	View
5B0651	Fitting Straight	Caterpillar	View
1244288	Flange Split	Caterpillar	View
3532637	Gauge Gp	Caterpillar	View
1773466	Connector	Caterpillar	View
1347721	Hex Head Bolts, Zinc Flake	Caterpillar	View
3863776	Tube As	Caterpillar	View
3747466	Cap Seal	Caterpillar	View
2D2511	Valve Gp Tire	Caterpillar	View
3654343	Plate	Caterpillar	View
1852654	Plate	Caterpillar	View
3553518	Medium to High Pressure Compact Hydraulic Hose Assembly	Caterpillar	View
7Y8763	Boss	Caterpillar	View
1754168	Screw Pan Head	Caterpillar	View
3611996	Support As	Caterpillar	View
4F4042	Cutting Edge Bolts	Caterpillar	View
3582867	Plate As	Caterpillar	View
4J9058	Cutting Edge Bolts	Caterpillar	View
8E4567	Cutting Edge	Caterpillar	View
3560686	Harness As	Caterpillar	View
8S4726	Hex Head Bolts, Phosphate and Oil Coated	Caterpillar	View
3748271	Medium Pressure Hydraulic Hose Assembly	Caterpillar	View
1700108	Spring	Caterpillar	View
8R0512	Gauge As Oil Level (Dipstick)	Caterpillar	View
5P7985	Bearing As Roller	Caterpillar	View
6V5224	Hex Head Bolts, Phosphate and Oil Coated	Caterpillar	View
1549024	Valve Gp Fluid Sampling	Caterpillar	View
1834840	Washer	Caterpillar	View
1668554	Medium Pressure Hydraulic Hose Assembly	Caterpillar	View
3584992	Axial Piston Pump Variable Displacement	Caterpillar	View
1U0593	Cutting Edge	Caterpillar	View
3593196	Bracket As	Caterpillar	View
3519918	Halogen Bulbs	Caterpillar	View
8T4149	Elbow	Caterpillar	View
3669650	Film Grease	Caterpillar	View
5P0093	Seal Lip Type	Caterpillar	View
1782740	Injector As Grease	Caterpillar	View
3574260	Spring As Ga	Caterpillar	View
6K4191	Cap Upper	Caterpillar	View
1138694	Bolt Flange	Caterpillar	View
3565630	Bracket As	Caterpillar	View
7X0349	Track Bolt	Caterpillar	View
3465616	Clip	Caterpillar	View
3891542	Hose Radiato	Caterpillar	View
6I9250	J Series (side pin) Adapter	Caterpillar	View
4D9986	Oring	Caterpillar	View
1019762	Mushroom Mount	Caterpillar	View
3631934	Plate	Caterpillar	View
3525586	Plate As	Caterpillar	View
1U2207	Edge Cutting	Caterpillar	View
3982993	Cap Tank	Caterpillar	View

Specifications

engine

Displacement - 427cu in

Diameter - 4 inch

Stroke - 5 inches

Emissions - Engine meets US EPA Tier 4 Final / EU Stage IV standards.

Engine Model - Cat C7.1 ACERT

Note (1)

* The power and torque of range 4 corresponds to the performance mode with Caterpillar Power by Range technology.

Note (2)

The nominal values of the net power are tested under standard conditions for the specified standard and indicate the power available on the flywheel when the engine is equipped with an alternator, an air cleaner, exhaust components and a fan at the indicated speed.

Note (3)

No performance degradation is required up to 3,000 m (10,000 ft). Auto derate protects hydraulic and transmission systems.

Note (4)

Spark arrester characteristics as standard Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual test).

Maximum Gross Power - 164 HP

Rated net power - 157 hp

Maximum rated apparent power - ISO 14396 (DIN) - 166 hp

Maximum rated apparent power - maximum engine speed (performance in power mode: range 1-4) - 1800 rpm

Maximum rated apparent power - ISO 14396 - 164 hp

Maximum nominal apparent power - ISO 14396 (power mode during operation: range 1-4) - 164 hp

Maximum nominal apparent power - ISO 14396 (DIN) (Power performance mode: range 1-4) - 166 hp

Rated net power - 1800 rpm - SAE J1349 at minimum fan speed (high power mode: range 1-4) - 157 hp

Rated net power - 1800 rpm - ISO 9249 (1977) / EEC 80/1269 at minimum fan speed (performance mode with power: range 1-4) - 160 hp

Rated net power - 1800 rpm - ISO 9249 (DIN) at minimum fan speed (Power mode: range 1-4) - 162 hp

Maximum Gross Torque - ISO 14396 (Power Mode Performance: Range 1-4) - 592 lb-ft

Maximum Net Torque - SAE J1349 (High Power Mode: Range 1-4) - 566 lb-ft

Maximum Pure Torque - ISO 9249 (1977) / EEC 80/1269 (Power Mode Performance: Range 1-4) - 572 lb-ft

Maximum rated apparent power - maximum engine speed (standard power mode: range 1-3 *) - 1600 rpm

Maximum nominal apparent power - ISO 14396 (standard power mode: range 1-3 *) - 160 hp

Maximum nominal apparent power - ISO 14396 (DIN) (Standard power mode: range 1-3 *) - 162 hp

Rated net power - 1600 rpm - SAE J1349 with minimum fan speed (standard power mode: range 1-3 *) - 154 hp

Rated net power - 1600 rpm - ISO 9249 (1977) / EEC 80/1269 at minimum fan speed (standard power mode: range 1-3 *) - 156 hp

Rated net power - 1600 rpm - ISO 9249 (DIN) at minimum fan speed (standard power mode: range 1-3 *) - 158 hp

Maximum Torque - ISO 14396 (Standard Power Mode: Range 1-3 *) - 592 lb-ft

Maximum Pure Torque - SAE J1349 (Standard Power Mode: 1-3 * Range) - 566 lb-ft

Maximum Pure Torque - ISO 9249 (1977) / EEC 80/1269 (Standard Power Mode: Range 1-3 *) - 572 lb-ft

Power train

Front axle - fixed

Rear Axle - Swing

Front axle - Traction device - Standard - Differential lock

Rear Axle - Traction Device - Optional - Limited Friction Differential

Note (1)

The drivetrain is driven by Caterpillar`s exclusive intelligent power management system for maximum performance and efficiency.

Note (2)

Differential front axle lock can be activated on the go with full torque of up to 10 km / h (6.2 mph) at 930M.

Brakes - Parking - Spring-loaded hydraulic drive

Brakes - Service - Internal wet disc

Rear axle - Swing angle according to tire size - 20.5 R25, 550/65, 600/65, 650/65 - 10.5 degrees

Rear axle - Swing angle according to tire size - Solid tires, 750/65, 620/65, Skidding - 7 degrees

Transmission

The note

* Creeper control provides maximum speed range adjustment from 1 km / h (0.6 mph) to 13 km / h (8 mph) in range 1 using the optional display, if installed. The factory default is 7 km / h (4.4 mph).

Forward and backward - 1 * range - 1-13 km / h (0.6-8 mph)

Forward and backward - range 2 - 8 mph

Forward and Backward - Range 3 - 17 Mph

Forward and backward - range 4 - 25 mph

Steering

Maximum Operating Pressure - Steering Pump - 3,500 psi

Double Acting Steering Cylinder - Bore Diameter - 2.8 Inches

Double Acting Steering Cylinder - 1.6 Inch Diameter

Double Acting Steering Cylinder - Stroke - 17.2in

Maximum Steering Torque - 0 Degrees (Direct Machine) - 37,155 lb ft

Maximum Flow - Steering Pump - 34 gallons / min

Maximum Steering Torque - 40 Degrees (Full Turn) - 27,747 lb-ft

Steering cycle time - from full left to full right - minimum rpm: limited pump flow rate - 2.8 s

Steering cycle time - from full left to full right - maximum revolutions: 90 rpm. Steering wheel speed - 2.4 s

Note (1)

The steering system uses a special pump with variable displacement, load-sensitive, with double cylinders of double action.

Note (2)

The indicated flow rates refer to a machine operating in high power mode (1800 rpm).

Buckets

Bucket volume - 2.1-5.0 m3 (2.7-6.5 cubic meters)

Performance characteristics

Full tip load - 18670 pounds

Taxi

ROPS - ISO 3471: 2008

FOPS - ISO 3449: 2005 LEVEL II

Note (1)

Declared sound levels according to ISO 6396: 2008 * in Performance Power mode: Standard cab: 68 3 dB (A) and Deluxe cab

Note (2)

* Measurements were taken with the doors and windows of the cabin closed and at 70% of the maximum rotation speed of the engine cooling fan. Noise levels may vary at different speeds of the engine cooling fan.

Loader hydraulic system

Double Action Lift Cylinder - Stroke - 28.7 Inches

Double Action Tilt Cylinder - Stroke - 21.9 Inches

Max Flow - Gun Pump - 50 gal / min

Note (1)

* The 3rd and 4th flow functions are fully adjustable from 20% to 100% of the maximum flow through the secondary display, if installed.

Note (2)

The system of units uses a special pump with variable displacement, sensitive to load, with double lifting cylinders of double action and one inclined cylinder of double action.

Note (3)

The indicated flow rates refer to a machine operating in high power mode (1800 rpm).

Maximum Working Pressure - Implement Pump - 3626 psi

Double Acting Lifting Cylinder - 4.7 in. Bore

Double Acting Lifting Cylinder - Bar Diameter - 2.6 Inches

Double Action Tilt Cylinder - Bore Diameter - 5.9in

Double acting tilt cylinder - stem diameter - 3.5 inches

Pressure Relief - Tilt Cylinder - 4061 psi

Maximum flow rate - Implement pump - 3rd function * - 50 gal / min

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Increase (from ground level to maximum lift) - 5.1 / 5.7 seconds

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Dump (at maximum lift height) - 1.5 / 1.7 seconds

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Float Down (maximum rise to ground level) - 2.7 / 2.7 seconds

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Total cycle time - 9.3 / 10.1 seconds

Maximum flow rate - Implement pump - 4th function Maximum flow rate * - 42 gal / min

Pressure Relief - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure - 3626 psi

Pressure Relief - Tilt Cylinder - 3 and 4 Pressure Relief Functions - 4061 psi

Air conditioning system

Air conditioning

The air conditioning system on this unit contains R134a fluorinated greenhouse refrigerant (1430 global warming potential). The system contains 1.9 kg of refrigerant with a CO2 equivalent of 2.717 metric tons.