Caterpillar WHEEL-TYPE LOADER 926M - catalog of spare parts

Specifications

engine

Displacement - 427cu in

4 inch diameter

Stroke - 5 inches

Emissions - Engine meets US EPA Tier 4 Final / EU Stage IV standards.

Engine Model - Cat C7.1 ACERT

Note (1)

* The power and torque of range 4 corresponds to the performance mode with Caterpillar Power by Range technology.

Note (2)

The nominal values ​​of the net power are tested under standard conditions for the specified standard and indicate the power available on the flywheel when the engine is equipped with an alternator, an air cleaner, exhaust components and a fan at the indicated speed.

Note (3)

No performance degradation is required up to 3,000 m (10,000 ft). Auto derate protects hydraulic and transmission systems.

Note (4)

Spark arrester characteristics as standard Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual test).

Maximum Gross Power - 153 HP

Rated net power - 148 hp

Maximum rated apparent power - ISO 14396 (DIN) - 155 hp

Maximum rated apparent power - maximum engine speed (performance in power mode: range 1-4) - 1800 rpm

Maximum rated apparent power - ISO 14396 - 153 HP

Maximum nominal gross power - ISO 14396 (high power mode: range 1-4) - 153 hp

Maximum rated apparent power - ISO 14396 (DIN) (Performance in power mode: range 1-4) - 155 hp

Rated net power - 1800 rpm - SAE J1349 at minimum fan speed (high power mode: range 1-4) - 148 hp

Rated net power - 1800 rpm - ISO 9249 (1977) / EEC 80/1269 at minimum fan speed (power mode during operation: range 1-4) - 149hp

Rated net power - 1800 rpm - ISO 9249 (DIN) with a minimum fan speed (operating power mode: range 1-4) - 151 hp

Maximum Gross Torque - ISO 14396 (Power Mode Performance: Range 1-4) - 531 lb-ft

Maximum Net Torque - SAE J1349 (High Power Mode: Range 1-4) - 511 lb-ft

Maximum Pure Torque - ISO 9249 (1977) / EEC 80/1269 (Power Mode Performance: Range 1-4) - 517 lb ft

Maximum rated apparent power - maximum engine speed (standard power mode: range 1-3 *) - 1600 rpm

Maximum rated apparent power - ISO 14396 (standard power mode: range 1-3 *) - 146 hp

Maximum rated apparent power - ISO 14396 (DIN) (Standard power mode: range 1-3 *)

148hp

Rated net power - 1600 rpm - SAE J1349 at minimum fan speed (standard power mode: range 1-3 *) - 141hp

Rated net power - 1600 rpm - ISO 9249 (1977) / EEC 80/1269 at minimum fan speed (standard power mode: range 1-3 *) - 142hp

Rated net power - 1600 rpm - ISO 9249 (DIN) at the minimum fan speed (standard power mode: range 1-3 *) - 144 hp

Maximum Torque - ISO 14396 (Standard Power Mode: Range 1-3 *) - 531 lb-ft

Maximum Pure Torque - SAE J1349 (Standard Power Mode: Range 1-3 *) - 511 lb ft

Maximum Pure Torque - ISO 9249 (1977) / EEC 80/1269 (Standard Power Mode: Range 1-3 *) - 517 lb ft

 

Power train

Front axle - fixed

Rear Axle - Swing

Front axle - Traction device - Standard - Differential lock

Rear Axle - Traction Device - Optional - Limited Friction Differential

Note (1)

The drivetrain is driven by Caterpillar`s exclusive intelligent power management system for maximum performance and efficiency.

Note (2)

The differential front locking axle can be engaged on the go with full torque of up to 10 km / h (6.2 mph) at 926M.

Brakes - Parking - Spring-loaded hydraulic drive

Brakes - Service - Internal wet disc

Rear axle - swing angle according to tire size - 17.5 R25 - 13.5 degrees

Rear axle - Swing angle according to tire size - 20.5 R25, 550/65, 600/65, 650/65 - 10.5 degrees

Rear axle - Swing angle according to tire size - Solid tires, 750/65, 620/65, Skidding - 7 degrees

 

Steering

Maximum Operating Pressure - Steering Pump - 3,500 psi

Double Acting Steering Cylinder - Bore Diameter - 2.8 Inches

Double Acting Steering Cylinder - 1.6 Inch Diameter

Double Acting Steering Cylinder - Stroke - 17.2in

Maximum Steering Torque - 0 Degrees (Direct Machine) - 37,155 lb ft

Maximum Flow - Steering Pump - 34 gallons / min

Maximum Steering Torque - 40 Degrees (Full Turn) - 27,747 lb-ft

Steering cycle time - from full left to full right - minimum rpm: limited pump flow rate - 2.8 s

Steering cycle time - from full left to full right - maximum revolutions: 90 rpm. Steering wheel speed - 2.4 s

Note (1)

The steering system uses a special pump with variable displacement, load-sensitive, with double cylinders of double action.

Note (2)

The indicated flow rates refer to a machine operating in high power mode (1800 rpm).

 

Buckets

Bucket volume - 1.9-5.0 m3 (2.5-6.5 cubic meters)

 

Performance characteristics

Full Tip Load - 16587 lbs

 

Service replenishment options

Cooling system - 7.9 gal

Fuel Tank - 51.5 Gallons

Hydraulic Tank - 23.8 gal

Hydraulic system including tank - 42.3 gallons

Crankcase - 5.3gal

Gearbox - gearbox - 2.2gal

Diesel Exhaust Fluid (DEF) - 5 gallons

Front axles - 5.5gal

Rear axles - 5.5gal

 

Taxi

ROPS - ISO 3471: 2008

FOPS - ISO 3449: 2005 LEVEL II

Note (1)

Declared sound levels according to ISO 6396: 2008 * in Performance Power mode: Standard cab: 68 3 dB (A) and Deluxe cab

Note (2)

* Measurements were taken with the doors and windows of the cabin closed and at 70% of the maximum rotation speed of the engine cooling fan. Noise levels may vary at different speeds of the engine cooling fan.

 

Loader hydraulic system

Double Action Lift Cylinder - Stroke - 28.7 Inches

Double Action Tilt Cylinder - Stroke - 21.9 Inches

Maximum Flow - Implement Pump - 40 gallons / min

Note (1)

* The 3rd and 4th flow functions are fully adjustable from 20% to 100% of the maximum flow through the secondary display, if installed.

Note (2)

The system of units uses a special pump with variable displacement, sensitive to load, with double lifting cylinders of double action and one inclined cylinder of double action.

Note (3)

The indicated flow rates refer to a machine operating in high power mode (1800 rpm).

Maximum Working Pressure - Implement Pump - 3,771 psi

Double Acting Lifting Cylinder - 4.3 inch bore

Double Acting Lifting Cylinder - Bar Diameter - 2.4 Inches

Double acting tilt cylinder - bore diameter - 5.1 inches

Double acting tilt cylinder - 2.8 inch diameter

Pressure Relief - Tilt Cylinder - 4061 psi

Maximum Flow - Implement Pump - 3rd Function * - 40 gal / min

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Increase (from ground level to maximum lift) - 5.5 / 6.2 seconds

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Dump (at maximum lift height) - 1.5 / 1.7 seconds

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Float Down (maximum rise to ground level) - 2.6 / 2.6 seconds

Cycle Times - Performance (HP +) at 1800 rpm / Standard power mode at 1600 rpm - Total cycle time - 9.6 / 10.5 seconds

Maximum flow rate - Implement pump - 4th function Maximum flow rate * - 40 gal / min

Pressure Relief - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure - 3,771 psi

Pressure Relief - Tilt Cylinder - 3 and 4 Pressure Relief Functions - 4061 psi

 

Air conditioning system

Air conditioning

The air conditioning system on this unit contains R134a fluorinated greenhouse refrigerant (1430 global warming potential). The system contains 1.9 kg of refrigerant with a CO2 equivalent of 2.717 metric tons.