5C2890	, Hex Nuts, Zinc Plated	Caterpillar	View
6V8634	Connector	Caterpillar	View
8C3451	Dust Cap (not pictured)	Caterpillar	View
6V9850	Cat Elbow Adapter	Caterpillar	View
8Y8081	Tube Convoluted	Caterpillar	View
6V9632	Nut Weld	Caterpillar	View
6V5842	Hex Head Bolts, Phosphate and Oil Coated	Caterpillar	View
8T3426	Channel Trim	Caterpillar	View
1647556	Bracket	Caterpillar	View
6V8337	Hex Socket Head Bolts	Caterpillar	View
8T0389	Locknut	Caterpillar	View
2V1771	Grommet	Caterpillar	View
4F3654	Cutting Edge Bolts	Caterpillar	View
1003254	Spacer	Caterpillar	View
2L8068	Terminal Ring	Caterpillar	View
8T4205	Flat Washer, Zinc Plated	Caterpillar	View
8T8730	Socket Conne	Caterpillar	View
8T4821	, Flat Washer, Zinc Flake	Caterpillar	View
1950191	Combination Headlights: Non Shock Resistant	Caterpillar	View
0950674	Hex Socket Head Bolts	Caterpillar	View
7X2570	Hex Head Bolts, Zinc Flake	Caterpillar	View
1247427	Base	Caterpillar	View
2H3922	Lockwasher	Caterpillar	View
1602246	Cat Nylon Abrasive Sleeve	Caterpillar	View
1266872	Tee	Caterpillar	View
8T6870	Hex Head Bolts, Zinc Flake	Caterpillar	View
3D2824	Oring	Caterpillar	View
7N9017	Terminal Ring	Caterpillar	View
7X0586	Washer Hard	Caterpillar	View
0341432	Cable Ties and Applicators	Caterpillar	View
7X2536	Hex Head Bolts, Zinc Flake	Caterpillar	View
7T0094	Socket Connector	Caterpillar	View
1M6120	Nut	Caterpillar	View
1138491	Fuse	Caterpillar	View
1710596	Receptacle As Connector	Caterpillar	View
8T4192	Track Bolt	Caterpillar	View
3B4503	Lock Washers	Caterpillar	View
8T4133	Track Nut	Caterpillar	View
1028802	Kit Receptacle	Caterpillar	View
8T5400	Connector As	Caterpillar	View
9X2299	Latch As	Caterpillar	View
1053478	Bolt Socket Head	Caterpillar	View
7J9108	ORFS Oring	Caterpillar	View
2S4078	Oring	Caterpillar	View
1532995	Coupling	Caterpillar	View
3445673	, Hex Nuts, Zinc Flake	Caterpillar	View
6V8995	Union	Caterpillar	View
3E4892	Washer	Caterpillar	View
9X2038	Washer	Caterpillar	View
1167471	Puller Minifuse	Caterpillar	View
8T4178	Track Bolt	Caterpillar	View
6V8722	Elbow	Caterpillar	View
6V2317	Hex Head Bolts, Phosphate and Oil Coated	Caterpillar	View
1440195	Hose	Caterpillar	View
3E4058	Valve As	Caterpillar	View
1325789	Clip	Caterpillar	View
6W5760	Dowel	Caterpillar	View
1117899	Gasket	Caterpillar	View
8I4427	Seal ORing	Caterpillar	View
1783893	Hydraulic Rod with Eye Bearing	Caterpillar	View

Specifications

engine

Net power - 96hp

Peak Torque - 248 lbs

Torque increase - 17%

Displacement - 231.8 cubic meters.

Hole - 3.9 inches

4.7 inch stroke

Engine Model - Cat C3.8 Turbo

The note. The engine meets EPA Tier 4 Interim / EU Stage IIIB USA standards.

Maximum Gross Power - SAE J1995 - 97hp

Maximum Gross Power - ISO 14396 - 97 HP

Maximum gross power - 97 hp

Rated Net Power - SAE J1349 - 92 HP

Rated net power - ISO 9249 / EEC - 96 hp

Rpm at rated power - 400 rpm

Rated Torque - 237lb ft

Revolutions per minute with a maximum torque of 1500 rpm

Power train

Front axle - fixed

Rear Axle - Swing

Type (1) - The power transmission is fully hydrostatic, works with two engines in the gearbox system to increase torque.

Type (2) - the integrated coupling on one engine disengages at higher speeds to get maximum speed.

Front axle - Traction device - Differential lock

Rear Axle - Fluctuations - 11 degrees

Rear Axle - Traction Device - Differential Lock

Brakes - Service brakes - Internal wet disc

Brakes - Parking brake - Cable applied, spring release

Transmission

Type (2) - Creeper control allows you to adjust the maximum speed range from 0 to 10 km / h (6 mph) in speed range 1.

Type (1) - Switching from low range to high range occurs on the go for added convenience.

Ahead - low range, speed range 1 - 6.3 mph

Ahead - low range, speed range 2 - 12.5 mph

Ahead - High Range - 25 Mph

Reverse - Low Range, Speed Range 1 - 6.3 mph

Reverse - Low Range, Speed Range 2 - 12.5 mph

Reverse - High Range - 25 mph

Steering

Type of steering - The steering system uses a special double-acting double-acting pump.

Maximum Working Pressure - Steering Pump - 3,263 psi

Steering angle - in each direction - 40 degrees

Double Acting Steering Cylinder - Bore Diameter - 2.4 Inches

Double Acting Steering Cylinder - 1.4 Inch Diameter

Double-acting Steering Cylinder - Stroke - 15.7 inches

Maximum Steering Torque - 0 Degrees (Direct Machine) - 27,369 lb-ft

Maximum Steering Torque - 39 Degrees (Full Turn) - 21593 lb-ft

Steering cycle time - from stop to stop - at an engine speed of 2400 rpm, a steering wheel speed of 90 rpm - 2.8 s

The number of revolutions of the steering wheel - from stop to stop, wheel speed> 67 rpm - 3.75 revolutions

The number of revolutions of the steering wheel - from stop to stop, wheel speed <27 rpm - 5.75 revolutions

Maximum Flow - Steering Pump - 22.2 gallons / min

Weights

Operating Weight - 17,910 lbs.

Operating Weight - Standard Lift - 17,910 lbs.

Operating Weight - High Lift - 18030 lbs

Tires

NOTE Wheel sets are interchangeable between 910K and 914K.

Tire Size - Standard - 17.5-25 12PR

Tire size - optional (1) - 17.5-R25

Tire size - option (2) - 17.5-25 16PR

Tire size - non-pneumatic - Flexport - 53.5916.5 (equivalent to 15.5 / 17.525)

Buckets

Bucket volume - 1.2 m3-2.5 m3 (1.6 s3-3.3 s3)

General purpose - 1.2-1.5 m3 (1.6-2.0 cubic meters)

Bucket type

Performance Series buckets use a long floor and open throat for easy loading and good material retention.

Performance characteristics

Nominal bucket capacity - 3.3yd3

Ground clearance - 45 degree full lift and unload - 112 ft.

Departure - 45 degrees, full rise and discharge - 31 feet to

Joint angle - in each direction - 40 degrees

Full Tip Loading - 12,294 lbs

Full Turn Tipping Load - Standard Lift - 10,538 lbs

Tipping Load per Turn - High Lift - 8603 lbs

Taxi

ROPS - ROPS: SAE J1040 MAY94, ISO 3471-1994.

Fops - FOPS: SAE J / ISO 3449 APR98, Level II, ISO 3449 1992, Level II.

Sound

The declared dynamic sound pressure level of the operator in accordance with ISO 6396: 2008 is: - Deluxe Cabin: 75 dB (A)

Loader hydraulic system

Maximum Working Pressure - Implement Pump - 3,046 psi

Primary Discharge Pressure - 4061 psi

Maximum Pump Flow 33 Gallons / Min

Maximum Consumption - Implement Pump - 3rd Function - 25 gal / min

Maximum Consumption - Implement Pump - 4th Function - 25 gal / min

Cycle Time - Rise - 5.3 s

Cycle Time - Dump - 1.8 s

Cycle Time - Rackback - 2.4 s

Cycle Time - Float - 3.7 s

Cycle time - lower, float - 4 s

Lift Cylinder - 3.9 Inch Bore

Lifting Cylinder - Rod Diameter - 2.4 Inches

Lifting Cylinders - Stroke - 23.3 inches

Tilt Cylinder - 3.9 Inch Hole Diameter

Tilt Cylinder - Stem Diameter - 2.4 Inches

Tilt Cylinder - Stroke - 22.8 inches