Caterpillar WHEEL-TYPE LOADER 908M - catalog of spare parts
Dimensions with Bucket (approximate) - Standard Lift - With ISO Coupling
Height - From Ground To Cabin ** - 8.7 Feet In
Height - ground clearance ** - 1.1 feet in
Length - Wheelbase - 7.1 Feet in
Length - Total * - 18.5 feet in
Reach - Bucket 45 degrees * - 2.5 feet in
Digging Depth ** - 3.9 inches
Ground clearance - 45 degree bucket * - 8.6 feet per
Ground clearance - level bucket ** - 10.5 feet in
Height - Bucket Pin ** - 11.2 ft.
Width - Bucket - 6.8 Feet in
Width - Tread Center - 5.1 Feet in
Turn radius - above bucket - 14.9 feet in
Turn Radius - Inside Tires - 6.8 Feet in
Machine Width - 6.5 Feet in
Dump angle at full rise - 45 degrees
Departure angle - 33 degrees
Joint angle - 39 degrees
Note (1) - * Depends on the bucket.
Note (2) - ** Bus dependent.
Note (3). The dimensions shown are for a machine with general purpose buckets, bolt-on cutting edges, an operator weighing 75 kg (165 lbs), no air conditioning, and Dunlop 405/70 SPT9 tires.
Choose WHEEL-TYPE LOADER 908M section:
Specifications
engine
Net power - 74 hp
Displacement - 201cu per
Hole Diameter - 3.7 inches
4.7 inch travel
Emissions
* Cat C3.3B DIT engine complies with US EPA Tier 4 Final / EU Stage IIIB emission standards or equivalent Tier 4 Interim / Stage IIIA emission standards.
Engine Model - Cat C3.3B DIT *
Note (1)
Net power ratings are tested under standard conditions for the specified standard.
Note (2)
The net power shown is the power available on the flywheel when the engine is equipped with an alternator, air cleaner, exhaust filter and fan at minimum speed.
Note (3)
No performance degradation is required up to 3,000 m (10,000 ft). Auto derate protects hydraulic and transmission systems.
Note (4)
Flywheel according to actual SAE conditions with fan at maximum speed.
Note - * Meets US EPA emission standards of Level 4 Final / EU Stage IIIB (M series) or Level 4 Interim / Stage IIIA (M series [EUSO]).
Maximum apparent power - SAE J1995 - 74 hp
Maximum net power - SAE J1349 - 68 hp
Maximum apparent power - ISO 14396 - 73 hp
Rated net power - 2500 rpm - SAE J1349 - 68 hp
Maximum net power - ISO 9249 - 69 hp
Maximum gross power - 73 hp
Maximum apparent power - ISO 14396 (DIN) - 74 hp
Maximum Torque - ISO 14396 - 192 lb-ft
Maximum Net Torque - SAE J1349 - 189 lb-ft
Maximum Net Torque - ISO 9249 (1977) / EEC 80/1269 - 191 lb-ft
Note (5) - The Cat C3.3B Tier 4 Final / Stage IIIB uses an active regeneration system that does not require operator interaction under normal conditions.
Rated net power - 2400 rpm - SAE J1349 - 73 hp
Rated net power - 2400 rpm - ISO 9249 (1977) / EEC 80/1269 - 74 hp
A train
Forward - Range 1 - 6 mph
Forward - Range 2 - 12 mph
Ahead - High Range - 22 mph
Reverse - Range 1 - 6 mph
Reverse - Range 2 - 12 mph
Reverse - High Range - 22 mph
Operational
Working Weight - 14032 lbs
Steering
Maximum Working Pressure - Steering Pump - 3191 psi
Steering joint angle - in each direction - 39 degrees
Double Acting Steering Cylinder - Bore Diameter - 3.1in
Double Acting Steering Cylinder - 1.4 Inch Diameter
Double Acting Steering Cylinder - Stroke - 11.8 Inches
Nominal flow rate - steering pump - 12 gal / min
Maximum Steering Torque - 0 Degrees (Macine Straight) - 42,506 lb-ft
Maximum Steering Torque - 39 Degrees (Full Turn) - 31,398 Lb-ft
Steering AC cycle time - from full left to full right - 2620 rpm - 3 s
The number of revolutions of the steering wheel - from full left to full right or from full right to full left - <6 turns
Weights
Working Weight - 14032 lbs
Tires
Option (1) - 360/80 R20 TRI2 Nokian
Option (2) - 375/75 R20 XZSL Michelin
Option (3) - 400/70 R20 XMCL Michelin
Option (4) - 400/70 R20 Bibload Michelin
Option (5) - 405/70 R20 SPT9 Dunlop
Option (6) - 12.5-20 ATU Firestone
Buckets
Bucket volume - 0.9 m3-1.5 m3 (1.2 s3 to 2.0 s3)
Bucket Capacity - ISO Coupling - 0.9-1.5 m3
Bucket Capacity - SSL Style Connector - 1.2-2.0 yd3
General purpose - 1.1-1.3 m3 (1.44-1.7 m3)
Lightweight Material - 2yd3
Hydraulic system
Hydraulic cycle time - dump - 1.3 s
Main Relief - 3rd Auxiliary Stream: Standard - 22 gallons / min
Major Relief - 3rd Auxiliary Flow - 3,400 psi
Main Relief - 3rd Auxiliary Stream: High Flow - 34 gallons / min
Hydraulic Cycle Time - Rise - 5.2 s
Hydraulic Cycle Time - Rackback - 2.1 s
Hydraulic cycle time - lower - 3.2 s
Performance characteristics
Nominal bucket capacity - 1.4yd3
8311 lb full load tipping load
Tipping Load - Direct - ISO 14397-1 - 9757 lbs.
Tipping Load - Full Turn - ISO 14397-1 - 7947 lbs
Ground Clearance - Full Lift and 45 Degree Dump - 8 ft. In
Achieve - full lift and 45-degree drop - 3 feet in
Steering joint angle - in each direction - 39 degrees
Service replenishment options
Cooling system - 4.4 gal
Fuel tank - 20.6 gal
Hydraulic Tank - 12.2 Gallons
Hydraulic system - including tank - 19 gal
Crankcase - 3gal
Gearbox - gearbox - 2.9gal
Hydraulic system - 18.5 gal
Engine oil - 3gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471-1994.
FOPS - SAE J / ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Loader hydraulic system
Double Action Lift Cylinder - Stroke - 27.5 Inches
Double Action Tilt Cylinder - Stroke - 16.4in
Maximum Flow - Implement Pump - 22 gallons / min
3rd Function Maximum Pressure - 3408 psi
Maximum Working Pressure - Implement Pump - 3408 psi
Pressure Relief - Tilt Cylinder Rod - 2756 psi
Maximum boost pressure - 3191 psi
Double Acting Lifting Cylinder - 3.3 Inch Diameter
Double Acting Lifting Cylinder - Bar Diameter - 2 Inches
Double Action Tilt Cylinder - Hole Diameter - 3.9 Inches
Double Action Tilt Cylinder - Rod Diameter - 2.2 Inches
Hydraulic cycle time - 1800 rpm - rise, ground level to maximum rise - 5.5 s
Hydraulic cycle time - 1800 rpm - unloading at a maximum lift height - 1.5 s
Hydraulic cycle time - 1800 rpm - swimming down, maximum rise to ground level - 2.6 s
Hydraulic cycle time - 1800 rpm - Total cycle time - 9.6 s
Hydraulic cycle time - 1000 rpm - rise, ground level to maximum rise - 9.6 s
Hydraulic cycle time - 1000 rpm - unloading at maximum lift height - 3 s
Hydraulic cycle time - 1000 rpm - swimming down, maximum rise to ground level - 2.6 s
Maximum flow rate - Implement pump - Auxiliary function Standard flow rate - 22 gal / min
Maximum flow rate - Implement pump - Auxiliary function High flow rate - 33 gallons / min
Pressure Relief - Tilt Cylinder Head - 4,496 psi
Dimensions - with ISO coupling - approximate
Turn Radius - Inner Tire - 6.8 Feet
Turn radius - above bucket - 14.9 feet in
Digging Depth - 3.9 Inches
Height Load - 10.5 Feet in
Ground clearance - 13in
Articulated finger at maximum height - 11.2 feet per
Joint angle - degrees - 39
Maximum Fork Height - 10.9 Feet in
Total length - with bucket - 18.5 feet in
Maximum reach - 4.3 feet per
Total length - with forks - 19.7 feet in
Departure angle - degrees - 33
Wheelbase - 7.1 Feet
Departure forks at maximum height - 1.5 feet in
Fork Height at Maximum Departure - 4.8 Feet in
Maximum Blade Height - 8.6 Feet in
2.8 inches below ground level
Machine Width - 6.5 Feet in
Tire measure - 5.2 feet in
Dump angle at maximum height - degrees - 45
Width - Bucket - 6.8 Feet in
Reach at ground level - 2.6 feet in
Cabin Height - 8.7 Feet in
Departure at maximum blade height - 2.5 feet per
Dimensions - with SSL connector - approximate
Turn Radius - Inner Tire - 6.8 Feet
Turn Radius - Above Bucket - 15 ft.
Digging Depth - 3.7 inches
Maximum Blade Height - 8.3 Feet in
Depth of the fork above the ground - 1.2 inches
Height Load - 10.5 Feet in
Machine Width - 6.5 Feet in
Ground clearance - 13in
Articulated finger at maximum height - 11.2 feet per
Joint angle - degrees - 39
Maximum Fork Height - 10.8 Feet in
Total length - with bucket - 18.9 feet in
Maximum reach - 4.7 feet per
Total length - with forks - 20.2 feet in
Departure angle - degrees - 33
Wheelbase - 7.1 Feet
Departure forks at maximum height - 1.9 feet per
Fork height at maximum reach - 5 feet in
Tire measure - 5.2 feet in
Dump angle at maximum height - degrees - 45
Width - Bucket - 6.8 Feet in
Reach at ground level - 3 feet in
Cabin Height - 8.7 Feet in
Departure at a maximum blade height of 2.8 feet
Maximum Material Density - General Purpose Bucket
Bucket Width - 81 Inch
Maximum Material Density - 2611 lbs / yard
Nominal Capacity - 1.4yd3
Blade Height - 100 Inches
Maximum Material Density - Lightweight Bucket
Bucket Width - 82 inches
Maximum Material Density - 1743 lbs / yard
Rated Power - 2yd3
Blade Height 92 Inches
Maximum Material Density - Multipurpose Bucket
Bucket Width - 81 Inch
Maximum Material Density - 3251 lbs / yard
Nominal Capacity - 1.2yd3
Blade Height 104 Inches
Performance Specifications - ISO Coupling
Nominal bucket capacity - 1.4yd3
Nominal Full Load Turnover - Bucket - 4,438 lbs
Tire size - 405/70 R20
Direct Tipping Load - Bucket - 10,891 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 1.25 stability, and 500 mm [20 in] load center) - 5561 lbs.
Breakout Force - Bucket - 13,712 lbs
Full Turn Static Tipping Load - Bucket - 8874 lbs
Stand back - transport position - 52
Performance Specifications - SSL Coupler
Nominal bucket capacity - 1.4yd3
Nominal Full Load Turnover - Bucket - 4,156 pounds
Tire size - 405/70 R20
Direct Tipping Load - Bucket - 10,207 lbs
Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 1.25 stability and 500 mm [20 in] load center) - 5192 lbs.
Breakout Force - Bucket - 10,566 lbs.
Full Turn Static Tipping Load - Bucket - 8311 lbs
Stand back - transport position - 52
Travel speeds
Speed 1 - 6.2 mph
Speed 2 - 12.4 mph
High Speed - 21.7 mph
Cabin Features - Canopy
Rear Knock Mirrors - Standard
Lockable Storage Box - Standard
Sun Visor - Standard
Cup Holder - Standard
Vinyl Suspension Seat - Standard
Adjustable Interior Mirror - Standard
Hook - Standard
Fixed steering column - standard
Cab Features - Comfort Cab
Left Window - Sliding - Standard
Cat Radio / CD / MP3 / WMA / AUX - optional
Sun Visor - Standard
Heater - Standard
Rear window defroster - standard
Adjustable Steering Column - Standard
Cup Holder - Standard
Air conditioning optional
Lockable Storage Box - Standard
Suspension seat, armrest - standard
Hook - Standard
Rear Knock Mirrors - Standard
Radio kit (wiring, speaker, antenna and grilles) - optional
Rear Curtain - Optional
Two Access Doors - Standard
Adjustable Interior Mirror - Standard
Cabin Light - Standard
Machine Security System - Optional
Cab Features - Deluxe Cab
Air conditioning optional
Machine Security System - Optional
Cat Radio / CD / MP3 / WMA / AUX - optional
Adjustable Interior Mirror - Standard
Rear Curtain - Optional
Adjustable Steering Column - Standard
Rear window defroster - standard
Hook - Standard
Rear Knock Mirrors - Standard
Fabric, electric air suspension, armrest, lumbar support and heated rear seat - standard
Cup Holder - Standard
Lockable Storage Box - Standard
Sun Visor - Standard
Two Access Doors - Standard
Left Window - Sliding - Standard
Cabin Light - Standard
Heater - Standard
Radio kit (wiring, speaker, antenna and grilles) - standard
Right Window - Sliding - Standard
Dimensions with Bucket (approximate) - Standard Lift - With SSL Connector
Height - From Ground To Cabin ** - 8.7 Feet In
Height - ground clearance ** - 1.1 feet in
Length - Wheelbase - 7.1 Feet in
Length - Total * - 19 ft.
Reach - Bucket 45 degrees * - 2.9 feet in
Digging Depth ** - 4.2 inches
Ground clearance - 45 degree bucket * - 8.2 feet per
Ground clearance - level bucket ** - 10.5 feet in
Height - Bucket Pin ** - 11.2 ft.
Width - Bucket - 6.8 Feet in
Width - Tread Center - 5.1 Feet in
Turn radius - above bucket - 14.9 feet in
Turn Radius - Inside Tires - 6.8 Feet in
Machine Width - 6.5 Feet in
Dump angle at full rise - 45 degrees
Departure angle - 33 degrees
Joint angle - 39 degrees
Note (1) - * Depends on the bucket.
Note (2) - ** Bus dependent.
Note (3). The dimensions shown are for a machine with general purpose buckets, bolt-on cutting edges, an operator weighing 75 kg (165 lbs), no air conditioning, and Dunlop 405/70 SPT9 tires.