Caterpillar WHEEL-TYPE LOADER 908H2 - catalog of spare parts
Dimensions
Digging Depth - 3.7 inches
Ground clearance - 1.1 feet in
Cabin Height - 8.7 Feet in
Wheelbase - 7.2 Feet
Maximum reach - 4.8 feet per
Maximum blade height - 8.4 feet in
Total length - with bucket - 18.9 feet in
Departure angle - degrees - 34 degrees
Fork height at maximum reach - 5 feet in
Turn Radius - Inner Tire - 6.9 Feet
Width - Bucket - 6.8 Feet in
Tire measure - 5.2 feet in
Machine Width - 6.6 Feet in
Reach at a maximum blade height of 2.9 feet in
Height Load - 10.6 Feet in
Articulated finger at maximum height - 11.2 feet per
Total length - with forks - 20.2 feet in
Reach at ground level - 3 feet in
Maximum Fork Height - 10.9 Feet in
Departure forks at maximum height - 2 feet per
Turn Radius - Above Bucket - 15 ft.
Joint angle - degrees - 39 degrees
Dump angle at maximum height - degrees - 45 degrees
Depth of plug below ground - 1.2 inches
Choose WHEEL-TYPE LOADER 908H2 section:
Specifications
engine
Engineering model
Net power - 69hp
Displacement - 203cu per
Hole Diameter - 3.7 inches
Travel - 4.7 inch
Maximum apparent power - SAE J1995 - 74 hp
Maximum net power - SAE J1349 - 68 hp
Maximum apparent power - ISO 14396 - 73 hp
Rated net power - 2500 rpm - SAE J1349 - 68 hp
Maximum net power - ISO 9249 - 69 hp
Gross Power - 2500 rpm - SAE J1995 - 74 hp
Net power - 2500 rpm - SAE J1349 - 68 hp
Transmission
Speed 1 - 4.3 miles per hour
Speed 2 - 12.4 mph
High Speed - 21.7 mph
Buckets
Bucket volume - 0.9-1.5 m3 (1.2-2.0 cubic meters)
Hydraulic system
Hydraulic cycle time - dump - 2 seconds
Hydraulic Cycle Time - Lift - 5 Seconds
Hydraulic Cycle Time - Rackback - 2.5 seconds
The main relief is 3,400 psi
Hydraulic cycle time - lower, float - 4 seconds
3rd auxiliary stream - standard stream - 22 gallons / min
3rd Auxiliary Flow - High Flow - 33 gallons / min
Performance characteristics
Breakout Power - 10,566 pounds
Nominal bucket capacity - 1.4yd3
Tire size - 405/70 R20
Full Turn Static Tipping Load - Bucket - 7518 lbs
Stand back - transport position - 52 degrees
Nominal Full Load Turnover - Bucket - 3,759 pounds
Hydraulic Lift Payload - 7,868 pounds
Direct Tipping Load - Bucket - 10,527 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, solid and flat surface, 500 mm (20 in) load center, 100 mm (4 in) transport above ground) - 6,592 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 1.25 stability and 500 mm [20 in] load center) - 5192 lbs.
Nominal full-load workload - forks (SAE J1197, mid-point load center, 1120 mm [44 in) teeth) (50% FTSTL) - 3,045 pounds
Nominal full-load workload - forks (SAE J1197, mid-point load center, 1220 mm [48 in] teeth) (50% FTSTL) - 2,919 pounds
Nominal Working Load, Straight Rear - Forks (SAE J1197, Mid-Point Load Center, 1120 mm [44 in) Prongs) (50% FTSTL) - 3,907 lbs.
Nominal Workload, Straight Back - Fork (SAE J1197, center of load at mid-point of teeth, 1220 mm [48 in] teeth) (50% FTSTL) - 3822 lbs
Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 500 mm [20 in] load center) (80% of FTSTL) - 5192 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 500 mm [20 in] load center) (60% of FTSTL) - 3,893 lbs.
Service replenishment options
Cooling system - 6.3 gal
Fuel tank - 20.6 gal
Hydraulic system - 25gal
Engine oil - 2.6gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471-1994
FOPS - SAE J / ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Maximum Material Density - General Purpose
Nominal Capacity - 1.4yd3
Blade Height - 100 Inches
Maximum Material Density - 2611 lbs / yard
Bucket Width - 81 Inch
Maximum Material Density - Lightweight Material
Rated Power - 2yd3
Blade Height 92 Inches
Maximum Material Density - 1743 lbs / yard
Bucket Width - 82 inches
Maximum Material Density - Multipurpose
Nominal Capacity - 1.2yd3
Blade Height 104 Inches
Maximum Material Density - 3251 lbs / yard
Bucket Width - 81 Inch
Operator Environment Features - Canopy
Fixed steering column - standard
Vinyl Suspension Seat - Standard
Hook - Standard
Sun Visor - Standard
Exterior Mirrors (2) - Knock Back - Standard
Lockable Storage Box - Standard
Adjustable Interior Mirror - Standard
Operator Environment Features - Comfort Cab
Two Access Doors - Standard
Adjustable Steering Column - Standard
Suspension seat, armrest - standard
Left Window - Sliding - Standard
Rear window defroster - standard
Hook - Standard
Cabin Light - Standard
Sun Visor - Standard
Radio kit (wiring, speaker, antenna and grilles) - standard
Exterior Mirrors (2) - Knock Back - Standard
Heater - Standard
Lockable Storage Box - Standard
Adjustable Interior Mirror - Standard
Rear Curtain - Optional
Radio Cat / CD / MP3 / WMA Player - optional
Operator Environment Features - Deluxe Cab
Two Access Doors - Standard
Rear window defroster - standard
Hook - Standard
Cabin Light - Standard
Adjustable Steering Column - Standard
Air-conditioned fabric seat, armrest, lumbar support, rear heated seat - standard
Left Window - Sliding - Standard
Right Window - Sliding - Standard
Air Conditioner - Standard
Rear Curtain - Optional
Radio Cat / CD / MP3 / WMA Player - optional
Sun Visor - Standard
Radio kit (wiring, speaker, antenna and grilles) - standard
Exterior Mirrors (2) - Knock Back - Standard
Heater - Standard
Lockable Storage Box - Standard
Adjustable Interior Mirror - Standard