Caterpillar WHEEL-TYPE LOADER 908H - catalog of spare parts
Bucket
Unloading clearance at maximum lift 8.34 ft.
Dimensions
Length with bucket on the ground - 18.9 feet in
Tire Width - 6.6 Feet in
Height to Cab Top - 8.7 Feet in
Ground clearance - 1.2 feet in
Wheelbase - 7.2 Feet
Articulated Finger - Maximum Height - 11.2 Feet
Reach in Max Lift and Dump - 2.9 feet in
Wheelbase - 7.1 Feet
Hinge pin height 11.2 ft.
Machine Height - 8.7 Feet in
Choose WHEEL-TYPE LOADER 908H section:
Specifications
engine
Engine make - 2236
Engine Model - C3.4
Net power - 79hp
Gross Power - 83 HP
Measured Power @ - 2500 rpm
Displacement - 203cu per
ISO 9249 Rating - 80 HP
EEC 80/1269 Rating - 80hp
SAE J1349 Rating - 79hp
Operational
Shipping Weight - 14,252.9 lbs
Fuel capacity - 20.7 gal
The volume of the hydraulic system is 22.2 gallons
2.7 gallon engine oil
Cooling system capacity - 6.4 gal
Static Tipping Weight - 10,524.9 lbs.
Turn radius - 7.5 feet in
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Tire size - 405/70 R20
Transmission
Transmission Type - Hydrostatic
The number of forward gears - 2
Number of reverse gears - 2
Top Speed - Forward - 12.5 mph
Max. Speed - Reverse - 12.5 mph
Speed 1 - 4.3 miles per hour
Speed 2 - 12.4 mph
High Speed - 21.7 mph
Weights
Working Weight - 14,253 lbs
Buckets
The volume of the bucket is 1.1 - 1.5 m3, 1.4 - 2.0 cubic meters.
Hydraulic system
Safety Valve Installation - 3400
Pump capacity - 22 gal / min
Raising time - 5sec
Dump Time - 2sec
Drop Time - 4sec
Hydraulic cycle time - dump - 2 seconds
Hydraulic Cycle Time - Lift - 5 Seconds
Hydraulic Cycle Time - Rackback - 2.5 seconds
The main relief is 3,400 psi
Hydraulic cycle time - lower, float - 4 seconds
3rd Auxiliary Flow - High Flow - 33 gallons / min
3rd auxiliary stream - standard - 22 gallons / min
Bucket
Unloading clearance at maximum lift - 8.4 feet per
Bucket Width - 6.8 Feet in
Bucket Capacity - Heaped - 1.5yd3
Dimensions
Length with bucket on the ground - 18.9 feet in
Tire Width - 6.52 Feet
Height to Cab Top - 8.7 Feet in
Wheelbase - 7.12 feet in
Ground clearance - 1.12 feet in
Articulated finger - maximum height - 11.19 feet in
Reach in Max Lift and Dump - 2.81 feet in
Performance characteristics
Breakout Power - 10,566 pounds
Nominal bucket capacity - 1.4yd3
Tire size - 405/70 R20
Full Turn Static Tipping Load - Bucket - 7,510 lbs.
Stand back - transport position - 52 degrees
Direct Tipping Load - Bucket - 10,522 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, solid and flat surface, 500 mm (20 in) load center, 100 mm (4 in) transport above ground) - 6,592 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 500 mm (20 in) load center) (80% of FTSTL) - 5192 lbs.
Nominal full-load workload - forks (EN 474-3: 2006, rough terrain, load center 500 mm (20 in)) (60% of FTSTL) - 3,893 pounds
Nominal full-load workload - 3,756 pounds
Service replenishment options
Cooling system - 6.3 gal
Fuel tank - 20.6 gal
Hydraulic system - 22.2 gal
Engine oil - 2.6gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471-1994
FOPS - SAE J / ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Motor dimensions
Hole Diameter - 3.7 inches
Travel - 4.7 inch
Displacement - 203cu per