Caterpillar WHEEL-TYPE LOADER 904H - catalog of spare parts
Bucket
Discharge clearance at maximum lift of 7.81 feet per
Dimensions
Length with Bucket on Ground - 15.41 Feet in
Tire Width - 5.4 Feet
Height to Cab Top - 7.85 Feet in
Wheelbase - 6.24 feet in
Ground clearance - 0.81 feet in
Articulated Finger - Maximum Height - 10.21 Feet
Reach at Max Lift and Dump - 2.19 feet in
Choose WHEEL-TYPE LOADER 904H section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - MHI S4Q2-T
Net power - 52 hp
Gross Power - 55 HP
Measured Power @ - 2400rpm
Displacement - 153cu in
Aspiration - Turbocharged
ISO 9249 Rating - 52 HP
EEC 80/1269 Rating - 52h.p.
SAE J1349 Rating - 52h.p.
Operational
Working Weight - 9898.8 pounds
Fuel capacity - 22gal
Hydraulic Capacity 11.4 Gallons
Engine oil 2 gallons
Cooling system capacity - 2.2gal
Static Tipping Weight - 6,613.9 lbs.
The amplifier from the generator - 90 amperes
Tire size - 12-16.5, 10PR
Transmission
Transmission Type - Hydrostatic
The number of forward gears - 2
Number of reverse gears - 2
Top Speed - Forward - 12.5 mph
Max. Speed - Reverse - 12.5 mph
Speed 1 - 4.3 miles per hour
Speed 2 - 12.4 mph
Weights
Operating Weight - 9900 pounds
Buckets
Bucket volume - 0.6 m3 - 1.0 m3 0.8 m3 - 1.3 m 3
Hydraulic system
Safety Valve Installation - 3000
Pump capacity - 22 gal / min
Lifting Time - 4.5sec
Unloading time - 0.8 s
Shorter time - 3.2 s
Hydraulic cycle time - dump - 0.8 seconds
Hydraulic Cycle Time - Rise - 4.5 seconds
The main relief is 3,000 psi
Hydraulic cycle time - lower, float - 3.2 seconds
3rd valve flow - 22 gallons / min
Bucket
Mine clearance at Max Raise - 7.9 feet in
Bucket Width - 5.9 Feet in
Bucket Capacity - Bulk - 0.8yd3
Dimensions
Length with bucket on the ground - 15.5 feet in
Tire Width - 5.4 Feet
Height to Cab Top - 7.9 Feet in
Ground clearance - 0.9 feet in
Wheelbase - 6.3 feet in
Articulated Finger - Maximum Height - 10.3 Feet
Reach at Max Lift and Dump - 2.2 Feet in
Performance characteristics
Breakout Force - 8003 lbs
Nominal bucket capacity - 0.8yd3
Tire size - 12-16.5, 10PR
Full Turn Static Tipping Load - 5511 lb Bucket
Stand back - transport position - 49 degrees
Rated Full Load Turnover Load - Bucket - 2,756 pounds
Direct Tipping Load - Bucket - 6,614 lbs.
Nominal working load per full turn - forks (EN 474-3: 2006, hard and flat surface, load center 500 mm [20 inches]) (80% of FTSTL) - 3527 pounds
Nominal full-revolution workload - forks (EN 474-3: 2006, hard and flat surface, 500 mm [20 in] center of load) (60% of FTSTL) - 2,646 pounds
Service replenishment options
Cooling system - 2 gal
Fuel tank - 22gal
Hydraulic system - 11 gal
Engine oil - 2gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J / ISO 3449 APR98 Level I and II; ISO 3449: 1994 Level I and II
Motor dimensions
Hole Diameter - 3.5 inches
4 inch travel
Displacement - 153cu in