Caterpillar WHEEL TRACTOR-SCRAPER 657G - catalog of spare parts
Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing the Cat 657E Coal Scraper to consistently deliver high productivity at the lowest cost per ton. The fuel system and the electronic control unit on the engine of the C18 tractor economically and accurately deliver fuel. High injection pressure, independent of engine speed, reduces smoke and emissions while improving response.
Choose WHEEL TRACTOR-SCRAPER 657G section:
Engine
Cat proven engines provide increased power and torque for superior traction in heavy load conditions.
Variable time injection
Variable injection times and durations improve fuel efficiency and cold start, reduce smoke and emissions.
Form speed injection
Forming injection speed reduces engine emissions and noise.
Mechanical parts
Fewer mechanical parts in the fuel system increase reliability.
Electronic control
Electronic control provides automatic height reduction and automatic limitation of the air filter.
Ratings of several horses
Rated power in several horsepower limits power in the first and second gears.
Neutral start control
Neutral start control prevents the engine from starting if the gearbox is not in neutral.
Reserve management
Backing up the throttle provides the operator with pre-set engine speed control in the event of a throttle inlet failure.
Block
Throttle lock allows the operator to block both engines at any operating level.
Directed shift management
Directional shift control prevents the operator from switching from neutral when engine speed is above a predetermined level.
Drived engine motion
Controlled throttle shifting increases transmission life by reducing fuel injection speed just before shifting.
Automatic other start
An automatic auxiliary launcher of the ether significantly improves the launch in cold weather.
Disable earth electronic level
Electronic trip at ground level allows the operator to stop the engine from the ground with a flick of a switch.
Steel spacer plate
A steel spacer plate between the block and the head eliminates the need for countersinks and helps prevent cracking problems.
Cooling oils
Oil-cooled pistons and full-size water-cooled sleeves maximize heat transfer for longer component life.
Subcooler
An additional cooler reduces the intake air temperature to increase power and reduce thermal stresses, which can cause premature wear of pistons, rings and liners.
Engine oil
The engine oil cooler maintains the optimum oil temperature for proper cooling and longer lubrication life.
Laminated thermal protection
Laminated heat shield improves the protection of the tractor by reducing the temperature of the open surfaces of the engine, cools the engine and working compartments, increases the service life of hoses and wiring.
Standard hydraulic retarder
An optional hydraulic retarder can extend brake life.
Transmission
An eight-speed, power shift transmission provides automatic on-the-go shifting for easy, reliable operation.
Neutral control of the coast inhibitor
Controlling a neutral coast inhibitor helps prevent shifting to a neutral gear at speeds above 8.1 km / h (5 mph).
Top gear control
Top-drive control helps prevent shifting above the programmed gear in order to better control the speed on the road.
Electronic programmable transmission control (eptc ii)
Electronic Programmable Transmission Control (EPTC II) records both current and intermittent faults.
Design
The electronically controlled Caterpillar shock absorber design absorbs shocks, ensuring a smooth ride.
Nitrogenic batteries
Nitrogen and oil batteries absorb and dampen road bumps.
Castle pillows pillows
The electronically controlled suspension is locked to provide positive control of the cutting edge during loading and unloading.
Double design kingbolt
The double king-bolt design withstands heavy external loads and makes it easy to install and remove.
Connections
The extensive use of steel castings eliminates many welded joints, making a strong hitch.
A bowl
Caterpillar Coal Scraper bowls are shipped from a plant that is specifically designed to process coal.
Auger mechanism
The screw mechanism in the bowl improves the load capacity by lifting the material from the cutting edge and transferring it to the top of the load.
Tandem power
The scraper for processing coal should work around the clock, in all weather conditions.
Taxi
A standard rubber cabin reduces noise and vibration for comfortable work during a shift.
Control
Easy control is easily accessible for precise and precise control.
Steering
Hydraulic servo-steering system provides light car feel and excellent maneuverability.
Steering column
The tilt of the steering column is adjustable in five different positions for operator comfort and control.
Seats
The suspension seat provides a comfortable ride.
Electronic monitoring system
The electronic monitoring system checks important systems of the machine and issues a three-level warning.
Radio
The operator station includes radio compatible wires in the cockpit.
Features
The standard features of the 657E cab are air conditioners, providing convenience and performance to the operator, as well as turn signals.
Fuel tank
A fuel tank mounted on the scraper improves access to the tractor`s engine compartment.
Wiring harness
The improved wiring harness includes color and numbered circuits for quick identification, fuses of at least 10 A and improved connectors.
Diagnostic connector
Diagnostic connector with a service tool allows you to quickly analyze the circuit start and charge.
Sealing rings
O-rings help keep these machines dry.
Centralized lubricants for lubricant
Centralized lubrication units for coupling and steering reduce lubrication time.
Service points
Engine service points are grouped on the right side for easy access.
Service platforms
Service platforms and multiple handrails improve access and security.
Availability of parts
Increasing the commonality of components with other Caterpillar scrapers / machines increases parts availability.
Engine disconnection
Electronic engine shutdown at ground level for convenient operator and service area operation.
Radiator
The radiator with a folded core allows you to replace individual cores in the form of modules, which reduces time and maintenance costs.
Retarder
Hydraulic retarder extends the service life of the brakes when working on heavy slopes.
Bumpers
The rounded sides reduce grip on high walls.
Casting
Extensive use of castings in the frame, sample and bowl provides a long service life.
Wiring harness and hose assemblies
Wiring harnesses and hose assemblies are lowered through the traction arms, eliminating the need for a “skipping” line, which can reduce the efficiency of the hydraulic system.
Tires
Standard tires provide maximum throughput of the available options.
Scrap drive protection
The universal joint scraper protection protects the output housing, the differential and the ejector cylinder, which helps minimize transmission maintenance costs.
Laminated thermal protection
A laminated thermal shield helps maintain the surface temperature in the engine compartment below the flash point of diesel fuel.
Caterpillar dealer
Your Caterpillar dealer offers a wide range of services that can be customized according to a customer support agreement when purchasing equipment.
Selection
Make detailed comparisons of the cars you are considering before you buy.
Purchase
Look past the initial price. Consider the available financing options as well as current running costs.
Job
Improving working methods can increase your profits. Your Cat dealer has training videos, literature, and other ideas to help you improve performance.
Support
More and more equipment buyers are planning to carry out effective maintenance before buying equipment.
Replacement
Repair, restoration or replacement? Your Cat dealer can help you evaluate the costs involved so you can make the right choice.
Product support
You will find almost all parts at our dealer.
ENGINE
Flywheel Power - Tractor/Scraper |
447 kw (600 hp) / 337 kW (451 hp) |
Flywheel Power - Tractor |
421 / 447 kW (564 / 600 hp) |
Flywheel Power - Scraper |
306 / 337 kW (410 / 451 hp) |
Tractor Engine |
Cat C18 with ACERT Technology |
Scraper Engine |
Cat C15 with ACERT Technology |
OPERATING SPECIFICATIONS
Scraper Capacity - Heaped |
73.0 yd³ |
Top Speed - Loaded |
33.0 mile/h |
Rated Load |
110000.0 lb |
Scraper Capacity - Struck |
59.0 yd³ |
180° Curb-to-Curb Turning Width |
51.25 ft |
WEIGHTS
Operating Weight - Loaded - Approximate |
268817.0 lb |
Operating Weight - Empty - Approximate |
158817.0 lb |
DIMENSIONS
Height - Top of Scraper |
15.16 ft |
Wheel Base |
36.08 ft |
Length - Overall |
56.4 ft |
Width - Overall |
14.32 ft |
Tread - Scraper |
9.24 ft |
Tread - Tractor |
8.64 ft |
Dimensions
Overall Length 53.03ft in
Overall Width 14.25ft in
Overall Height 15.45ft in
Wheelbase 32.66ft in
Tractor Ground Clearance 2.12ft in
Height to Top of Cab 12.18ft in
Specifications
Engine
Tractor Engine Cat C18 with ACERT Technology
Flywheel Power - Tractor/Scraper 447 kw (600 hp) / 337 kW (451 hp)
Flywheel Power – Tractor
Flywheel Power - Scraper
Scraper Engine Cat C15 with ACERT Technology
Tractor Engine
Make Caterpillar
Model C18 ACERT
Gross Power 632hp
Net Power
Displacement 1105cu in
Flywheel Power - Tractor/Scraper 447 kW (600 hp) / 337 kW (451 hp)
Net Power - Gears 1-2 564hp
Gross Power - Gears 1-2 596hp
Bore 5.7in
Stroke 7.2in
Net Power - Gears 3-8 600hp
Gross Power - Gears 3-8 632hp
Scraper Engine
Make Caterpillar
ModelC15 ACERT
Gross Power 478hp
Net Power
Displacement 928cu in
Bore 5.5in
Stroke 6.5in
Gross Power - Gears 1-2 437hp
Gross Power - Gears 3-8 478hp
Net Power - Gears 1-2 410hp
Net Power - Gears 3-8 451hp
Operational
Fuel Capacity 421.9gal
Cooling System Fluid Capacity 56.3gal
Engine Oil Fluid Capacity 26.9gal
Transmission Fluid Capacity 68gal
Differential Fluid Capacity 79.5gal
Hydraulic System Fluid Capacity 80gal
Wheel Coolant Fluid Capacity – each 68.6gal
Operating Voltage 24V
Alternator Supplied Amperage 75amps
Tire Size 40.5/75 R39
Transmission
Transmission Type 8-speed automatic powershift with electronic control
Number of Forward Gears 8
Number of Reverse Gears 1
Max Speed Forward 36mph
Max Speed Reverse 6mph
Reverse 6.1 mile/h
1 Forward 3.5mph
2 Forward 6.3mph
3 Forward 7.8mph
4 Forward 10.6mph
5 Forward 14.1mph
6 Forward 19mph
7 Forward 25.6mph
8 Forward 34.6mph
Top Speed – Loaded 33mph
Steering
Steering Angle – Right 90 degrees
Steering Angle – Left 85 degrees
Width - 180 degrees Turn – Right 44.7ft in
Width - 180 degrees Turn – Left 47.6ft in
Weights
Total Operating – empty 149417lb
Front Axle – empty 89650%
Rear Axle – empty 59767%
Total Operating – Loaded 253420lb
Front Axel – loaded 129244lb
Rear Axle – loaded 124176%
Operating Weight - Loaded – Approximate 268817lb
Operating Weight - Empty – Approximate 158817lb
Bowl
Rated Payload 104058lb
Heaped Capacity 44yd3
Struck Capacity 32yd3
Max Depth of Cut 16.7in
Width of Cut 12.5ft in
Dimensions
Overall Length 53.1ft in
Overall Width 14.3ft in
Height to Top of Cab 12.2ft in
Overall Height 15.5ft in
Wheelbase 32.7ft in
Tractor Ground Clearance 2.2ft in
Wheel Base 36.1ft in
Height - Top of Cab 12.2ft in
Width - Rear Tire Center Lines 110.8in
Length - Overall Machine 636.4in
Width - Inside of Bowl 145in
Height - Overall Shipping 185.4in
Width – Tractor 141.8in
Width - Overall Machine 171in
Ground Clearance – Tractor 25.4in
Front of Tractor to Front Axle 148.4in
Height - Scraper Blade Maximum 26.8in
Rear Axle - Rear of Machine 96in
Axle to Vertical Hitch Pin 24in
Bail Length - Maximum (Push-Pull) 72.3in
Width - Outside Bowl - Shipping Width 154in
Height - Top of Scraper 15.2ft in
Length – Overall 56.4ft in
Width – Overall 14.4ft in
Tread – Scraper 9.3ft in
Tread – Tractor 8.7ft in
Operating Specifications
Top Speed – Loaded 33mph
Rated Load 110000lb
Scraper Capacity – Struck 59yd3
Scraper Capacity – Heaped 73yd3
180 degrees Curb-to-Curb Turning Width 51.3ft in
Hydraulics
Bowl Cylinder Bore 9.3in
Bowl Cylinder Stroke 37.4in
Steering Circuit 99.9 gal/min
Scraper Circuit 153 gal/min
Cushion Hitch Circuit 12.7 gal/min
Relief Valve - Steering Circuit 1959 psi
Relief Valve - Implement Circuit 1999 psi
Compensator Settings - Cushion Hitch Circuit 3002 psi
Ejector Cylinder Bore 10.3in
Ejector Cylinder Stroke 76.7in
Secondary Steering Circuit 64.2 gal/min
Apron Cylinder Bore 9.3in
Apron Cylinder Stroke 30in
Scraper Bowl
Width - Cut - To Router Bits 12.7in
Rated Load 104000lb
Capacity – Struck 32yd3
Depth of Cut – Maximum 17in
Ground Clearance – Maximum 23in
Cutting Edge Thickness 1.8in
Depth of Spread – Maximum 26in
Scraper Capacity – Heaped 44yd3
Apron Closure Force 39200lb
Apron Opening 92in
Hyd. Penetration Force - 657G 121000lb
Service Refill Capacities - Scraper
Transmission 32gal
Differential 44gal
Final Drive – Each 7.9gal
Cooling System 24gal
Crankcase 10gal
Wheel Coolant – Each 34.3gal
Fuel Tank - 657G 421.9gal
Service Refill Capacities - Tractor
Transmission 36gal
Differential 36gal
Final Drive – Each 6gal
Cooling System 33gal
Hydraulic Reservoir 80gal
Crankcase 17gal
Wheel Coolant – Each 34.3gal
Windshield Washer 0.5gal
Weights - Standard, Tandem
Total Shipping 147959lb
Tractor Shipping 87717lb
Scraper Shipping 60242lb
Total Operating – Empty 150761lb
Front Axle 87924lb
Rear Axle 62837lb
Total Operating – Loaded 254761lb
Front Axle Weight – Loaded 128246lb
Rear Axle - Weight – Loaded 126515lb
Weights - Push-Pull
Total Shipping 160505lb
Tractor Shipping 93635lb
Scraper Shipping 64068lb
Total Operating – Empty 160505lb
Front Axle 93842lb
Rear Axle 66663lb
Total Operating – Loaded 264505lb
Front Axle – Loaded 134165lb
Rear Axle – Loaded 130340lb