Your region: United States

Caterpillar WHEEL LOADERS 980M - catalog of spare parts

Dimensions

Length with bucket on the ground - 26.17 feet in

Tire Width - 10.83 Feet in

Height to Cab Top - 10.25 Feet in

Wheelbase - 12.5 feet in

Ground clearance - 1.42 feet in

Dimensions - High Lift

Ground clearance - 1.42 feet in

Dimensions - Standard Lift

Ground clearance - 1.42 feet in

Operational characteristics

Note (1) - For the machine configuration defined in the "Weight" section.

Note (2) - Full compliance with ISO 143971: 2007, sections 1 to 6.

Note. Full compliance with the requirements of ISO (2007) 143971, sections 1 to 6, which requires a 2% check between calculations and tests.

Breakout Force - 50,357 lbs

Static Tipping Load - 40 Degree Full Turn - With Tire Deflection - 43,133 lbs

Static Tipping Load - 40 Degree Full Turn - No Tire Deflection - 45,847 lbs

Choose WHEEL LOADERS 980M section:

3P3060 SUN GEAR Caterpillar View
5P6727 BEARING A Caterpillar View
3P2983 SUN GEAR Caterpillar View
1P7835 CONE Caterpillar View
1P7834 CUP Caterpillar View
1V9148 BEARING Caterpillar View
1V9143 BEARING Caterpillar View
1V8240 BEARING SLV Caterpillar View
4T0932 4T0932 Caterpillar View
6Y7652 CUP Caterpillar View
6V4636 CUP Caterpillar View
6V4635 6V4635 Caterpillar View
5P3867 RACE Caterpillar View
8P1919 GEAR Caterpillar View
2P8353 2P8353 Caterpillar View
1V8242 BRG Caterpillar View
1V8241 BEARING SLEEVE Caterpillar View
2S0679 BEARING A Caterpillar View
1P2695 CUP Caterpillar View
1P2694 CONE Caterpillar View
8P1916 GEAR Caterpillar View
3P3096 3P3096 Caterpillar View
3P3059 GEAR Caterpillar View
6Y3484 BEARING Caterpillar View
7T9370 GEAR-SUN Caterpillar View
7T8816 7T8816 Caterpillar View

Specifications

engine

The number of cylinders - 6

Engine make - 2236

Engine Model - CAT C13 ACERT

Net power - 378hp

Gross Power - 417 HP

Max. Torque - 1617

Net Power - ISO 9249 - 386 HP

Engine Model - Cat? C13 ACERT?

Note. The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 1.6 kg of refrigerant with a CO2 equivalent of 2.288 metric tons.

Peak Torque - 1,200 rpm - SAE J1995 - 1,627 lb-ft

Peak Torque - 1200 rpm - ISO 14396 - 1609 lb-ft

Maximum net power - 1700 rpm - ISO 9249 - 386 hp

Maximum Net Torque - 1,100 rpm - 1,515 lb-ft

Maximum power - 1700 rpm - ISO 14396 - 420 hp

Maximum power - 1700 rpm - ISO 14396 - Metric - 426 hp

Maximum net power - 1700 rpm - ISO 9249 - Metric - 392 hp

Maximum net power - 1700 rpm - SAE J1349 - 386 hp

Maximum net power - 1700 rpm - SAE J1349 - Metric - 392 hp

Maximum power - 1700 rpm - SAE J1995 - 425 hp

Maximum power - 1700 rpm - SAE J1995 - Metric - 431 hp

Maximum Net Torque - 1,000 rpm - 1,505 lb-ft

Maximum power - 1800 rpm - ISO 14396 - 406 hp

Maximum power - 1800 rpm - ISO 14396 - Metric - 412 hp

Maximum power - 1800 rpm - SAE J1995 - 412 hp

Maximum power - 1800 rpm - SAE J1995 - Metric - 417hp

Peak Torque - 1300 rpm - SAE J1995 - 1617 lb-ft

Maximum net power - 1800 rpm - ISO 9249 - 373 hp

Maximum net power - 1800 rpm - SAE J1349 - 373 hp

Maximum net power - 1800 rpm - ISO 9249 - Metric - 378 hp

Maximum net power - 1800 rpm - SAE J1349 - Metric - 378 hp

Peak Torque - 1300 rpm - ISO 14396 - 1602 lb-ft

US EPA Tier 4 Final / EU Stage IV - Maximum Power - SAE J1995 - 425 HP

Level 2 / Level II, Level 3 / Level IIIA Equivalent: Maximum power - SAE J1995 - 412 hp

Operational

Working Weight - 66,337 lbs

Fuel tank capacity - 112.5 gal

Hydraulic Capacity 40 Gallons

Cooling system capacity - 12 gal

Transmission Fluid Capacity - 20.3 Gallons

The front axle / differential fluid volume is 22 gal

The fluid capacity of the rear axle / differential is 22 gal

Transmission

The number of forward gears - 4

Number of reverse gears - 4

Top Speed ​​- Forward - 24.5 mph

Max. Speed ​​- Reverse - 24.5 mph

Forward - 1 - 4.3 mph

Ahead - 2 - 8.3 mph

Forward - 3 - 14.6 mph

Forward - 4 - 24.5 mph

Note. Maximum speed in a standard car with an empty bucket and standard L4 tires with a roll radius of 933 mm (37 inches).

Reverse - 1 - 4.8 mph

Reverse - 2 - 9.4 mph

Reverse - 3 - 16.7 km / h

Reverse - 4 - 24.5 mph

Weights

Working Weight - 66,337 lbs

The note

Weight depending on machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, fenders on the road, Product Link ?, Open differential axles, secondary steering, noise reduction and 5.4 m3 (7 , 1 cube) GP bucket with BOCE.

Note (1) - For general purpose buckets with a volume of 5.4 m3 (7.1 cubic feet) with BOCE.

Note (2) - Weight depending on machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, fenders on the road, Product Link, open differential axles (front / rear), secondary steering, noise reduction and 5, 4 m3 (7.1 yd3) universal bucket with BOCE.

Buckets

Bucket volume - 4.2-12.2 m3 (5.25-16.0 m3)

Hydraulic system

Pressure Relief Valve Installation - 4975

Pump productivity - 119 gal / min

Hydraulic cycle time - total - 10.1 s

Aggregate System - Maximum Operating Pressure - 4975 psi

Unit pump type - variable displacement piston

Aggregate system - maximum pump capacity at 2250 rpm - 119 gal / min

Aggregate system - optional 3rd maximum flow rate - 63 gal / min

Implement System - Optional 3rd Function Maximum Pressure - 3,159 psi

Hydraulic cycle time - rated payload - rise from transport position - 5.3 s

Hydraulic cycle time - nominal payload - dump, at maximum lift - 1.7 s

Hydraulic Cycle Time - Rated Payload - Lower, Empty, Lower - 3.1 s

Hydraulic Cycle Time - Rated Payload - Total - 10.1 s

Axes

The back is hesitant? 13 degrees

The maximum rise and fall of one wheel - 22.5 inches

the brakes

Brakes - Brakes comply with ISO 3450: 2011

Dimensions

Length with bucket on the ground - 26.2 feet in

Tire Width - 10.9 Feet in

Height to Cab Top - 10.3 ft.

Ground clearance - 1.5 feet in

Wheelbase - 12.5 feet in

Service replenishment options

Cooling system - 14 gal

Fuel tank - 112.5 gal

Carter - 9.8 gal

DEF Tank - 5.5 gal

Hydraulic tank - 40gal

Transmission - 20.3 gal

Differential - Last gear - forward - 22gal

Differential - Last gear - Rear - 22gal

Sound

Note (1) - * Distance 15 m (49.2 ft), forward movement on the second gear ratio.

Note (2) - ** For machines in the countries of the European Union and in countries that adopt the EU Directives.

Note (3) - *** European Union Directive? 2000/14 / EU? as amended? 2005/88 / EC.?

The note

* Distance 15 m (49.2 ft), forward movement on the second gear ratio.

With the maximum value of the cooling fan speed - the sound pressure level of the operator (ISO 6396: 2008) - 75 dB (A)

The maximum value of the cooling fan rotation speed is the level of external sound power (ISO 6395: 2008) - 112 dB (A)

Maximum cooling fan rotation speed - external sound pressure level (SAE J88: 2013) - 78 dB (A) *

At a cooling fan speed of 70% of the maximum value, the sound pressure level of the operator (ISO 6396: 2008) ** - 72 dB (A)

At a cooling fan speed of 70% of the maximum value, the level of external sound power (ISO 6395: 2008) ** - 109 LWA ***

Taxi

ROPS / FOPS - ROPS / FOPS comply with ISO 3471: 2008 and ISO 3449: 2005 Level II

Bucket capacity

Bucket Range - 4.2-12.2 m (5.25-16.0 yards)

Dimensions - High Lift

Height - Top Hood - 10.3 feet in

Height - Top of the exhaust pipe - 12.4 feet to

Height - Top ROPS - 12.6 feet to

Ground clearance - 1.5 feet to

Center line from rear axle to counterweight edge - 8.2 feet to

Center line from rear axle to hitch - 6.3 feet to

Wheelbase - 12.5 feet in

Total length - without bucket - 26.9 feet in

Hinge pin height at maximum lift - 15.6 feet in

Lift clearance at maximum lift - 13.1 feet in

Stand back - maximum lift - 61 degrees

Stand back - bearing height - 48 degrees

Stand back on the ground - 39 degrees

Tread width - 8 feet in

The note - All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.

Hinge axis height when carrying - 2.3 feet to

Maximum width over tires - 10.9 feet in

Dimensions - Standard Lift

Height - Top Hood - 0.3 feet in

Height - Top of the exhaust pipe - 12.4 feet to

Height - Top ROPS - 12.6 feet to

Ground clearance - 1.5 feet to

Center line from rear axle to counterweight edge - 8.2 feet to

Center line from rear axle to hitch - 6.3 feet to

Wheelbase - 12.5 feet in

Total length - without bucket - 26.2 ft in

Hinge pin height at maximum lift - 14.9 feet in

Lift clearance at maximum lift - 12.5 feet in

Stand back - maximum lift - 61 degrees

Stand back - bearing height - 48 degrees

Stand back on the ground - 40 degrees

Tread width - 8 feet in

The note - All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.

Hinge axis height when carrying - 2.1 feet in

Maximum width over tires - 10.9 feet in

Engine - Level 3 / Stage IIIA Equivalent 

Emissions - Level 3 / Stage IIIA

Engine - Tier 4 Final / Stage IV

Emissions - Cat engine with ACERT technology? Meets Level 4 Final / Stage IV standards.

Engineering model - Cat C13 ACERT

Maximum Net Power - 1,700 rpm - SAE J1349 - 386hp

Peak Torque - 1200 rpm - SAE J1995 - 1,627 pounds

boring - 5.2in

Stroke - 6.2in

Displacement - 763cu in

Note (1) - The power values ​​apply at the indicated speed when tested under standard conditions for the specified standards.

Note (2) - The declared net power is the power available on the flywheel when the engine is equipped with a fan, an alternator, an air cleaner, and additional processing.

Note (3) - Total declared power - with a fan at maximum speed.

Maximum Net Torque - 1,100 rpm - SAE J1349 - 1515 pounds

Maximum power - 1700 rpm - SAE J1995 - 425hp - 

Engine - Level 2 / Level II, Level 3 / Equivalent to Level IIIA

Engineering model - Cat C13 ACERT

Maximum power - 1800 rpm - SAE J1995 - 417hp

Maximum Net Power - 1800 rpm - SAE J1349 - 373hp

Peak Torque - 1300 rpm - SAE J1995 - 1,617 pounds

Maximum Net Torque - 1000 rpm - SAE J1349 - 1,505 pounds

Boring - 5.2in

Stroke - 6.2in

Displacement - 763cu in

Emissions

Cat engine with ACERT technology? Meets Tier 2 / Stage II, Tier 3 / Stage IIIA emission standards.

Sound - Level 2 / Level II, Level 3 / Equivalent to Level IIIA

Operator sound pressure level - ISO 6396: 2008 - 75 dB (A)

External sound power level - ISO 6395: 2008 * - 112 dB (A)

External Sound Pressure Level - SAE J88: 2013 ** - 78 dB (A)

Note (1)

The indicated sound values ​​are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.

Note (2)

* For a standard machine configuration, measured in accordance with the procedures indicated at the maximum cooling fan speed.

Note (3)

** For standard machine configuration, measured in accordance with specified procedures. The measurements were carried out under the following conditions: a distance of 15 m (49.2 ft), forward movement on the second gear ratio with a maximum cooling fan speed.

Sound - Level 4 Final / Stage IV

Note (1) - The indicated sound values ​​are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.

Operator sound pressure level - ISO 6396: 2008 - 72 dB (A)

External sound power level - ISO 6395: 2008 * - 112 dB (A)

External Sound Pressure Level - SAE J88: 2013 ** - 78 dB (A)

Note (2) - * For a standard machine configuration, measured in accordance with the procedures indicated at maximum cooling fan speed

Note (1)

The indicated sound values ​​are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.

Note (2)

* For a standard machine configuration, measured in accordance with the procedures indicated at the maximum cooling fan speed.

Note (3)

** For standard machine configuration, measured in accordance with specified procedures. The measurements were carried out under the following conditions: a distance of 15 m (49.2 ft), forward movement on the second gear ratio with a maximum cooling fan speed.

Sound - Level 4 Final / Stage IV

Note (1)

The indicated sound values ​​are for specific operating conditions only. Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan. Hearing protection may be required when the machine is operated with a cab that is not properly serviced, or when doors and / or windows are open for extended periods or in noisy environments.

Operator sound pressure level - ISO 6396: 2008 - 72 dB (A)

External sound power level - ISO 6395: 2008 * - 112 dB (A)

External sound pressure level - SAE J88: 2013 ** - 78 dB (A)

Note (2)

* For a standard machine configuration, measured in accordance with the procedures indicated at the maximum cooling fan speed.

Note (3)

** For standard machine configuration, measured in accordance with specified procedures. The measurements were carried out under the following conditions: a distance of 15 m (49.2 ft), forward movement on the second gear ratio with a maximum cooling fan speed.