Your region: United States

Caterpillar WHEEL LOADERS 966M - catalog of spare parts

Service replenishment options

Cooling system - 18.9 gal

Fuel Tank - 82.7 Gallons

Carter - 6.5 gal

DEF Tank - 4.4gal

Hydraulic tank - 33 gal

Gearbox - 15.5gal

Differential - Last gear - front - 15.1 gal

Differential - Last gear - Rear - 15.1gal

NOTE - * Must comply with the requirements laid down in ISO 22241-1.

DEF Tank * - 4.4gal

Dimensions - High Lift

Ground clearance - 1.42 feet in

Dimensions - Standard Lift

Ground clearance - 1.42 feet in

Choose WHEEL LOADERS 966M section:

Specifications

engine

Displacement - 568cu per

Boredom - 4.6in

Stroke - 5.9 inches

Net Power - ISO 9249 - 276 HP

Engine Model - Cat? C9.3 ACERT?

The note

The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 1.6 kg of refrigerant with a CO2 equivalent of 2.288 metric tons.

Peak Torque - 1,200 rpm - SAE J1995 - 1,179 lb-ft

Peak Torque - 1200 rpm - ISO 14396 - 1166 lb-ft

Maximum net power - 1700 rpm - ISO 9249 - 276 hp

Maximum net power - 1700 rpm - ISO 9249 - Metric - 280 hp

Maximum net power - 1700 rpm - SAE J1349 - 276 hp

Maximum net power - 1700 rpm - SAE J1349 - Metric - 280hp

Maximum Net Torque - 1,000 rpm - 1,126 lb-ft

Maximum power - 1800 rpm - ISO 14396 - 307 hp

Maximum power - 1800 rpm - ISO 14396 - Metric - 311 hp

Maximum power - 1800 rpm - SAE J1995 - 311 hp

Maximum power - 1800 rpm - SAE J1995 - Metric - 315 hp

Maximum Gross Power - SAE J1995 - 311 HP

Maximum net power - SAE J1349 - 276 hp

Maximum apparent power - 1800 rpm - SAE J1995 - 311 hp

Maximum Net Torque - 1000 rpm - SAE J1349 - 1126 lb-ft

Transmission

Forward - 1 - 4 miles per hour

Forward - 2 - 8.1 mph

Forward - 3 - 14.6 mph

Forward - 4 - 24.9 mph

The note

Maximum speed in a standard vehicle with an empty bucket and standard L3 tires with a roll radius of 826 mm (32.5 inches).

Reverse - 1 - 4.4 mph

Reverse - 2 - 8.9 mph

Reverse - 3 - 16.1 mph

Reverse - 4 - 24.9 mph

Weights

Operating Weight - 51,176 lbs.

The note

Weight depending on machine configuration with Michelin 26.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, wing wings, Product Link ?, Manual differential lock / open axles (front / rear), powertrain protection, secondary steering, noise reduction and general purpose bucket of 4.2 m3 (5.5 cubic feet) with BOCE.

Buckets

Bucket capacity - 2.5-9.2 m? (3.25-12.0 yard?)

Hydraulic system

Hydraulic cycle time - total - 10.1 s

Aggregate System - Maximum Operating Pressure - 4496 psi

Unit pump type - variable displacement piston

Unit system - maximum pump capacity at 2200 rpm - 95 gal / min

Hydraulic cycle time - rated payload - rise from transport position - 6.1 s

Hydraulic cycle time - nominal payload - dump, at maximum lift - 1.4 s

Hydraulic Cycle Time - Rated Payload - Lower, Empty, Lower - 2.6 s

Hydraulic Cycle Time - Rated Payload - Total - 10.1 s

Aggregate system - option 3rd / 4th function Maximum flow - 69 gal / min

Implement System - Option 3rd / 4th Function Maximum Pressure - 3,000 psi

Operational characteristics

Note (1) - For the machine configuration defined in the "Weight" section.

Note (2) - Full compliance with ISO 143971: 2007, sections 1 to 6, which requires a 2% check between calculations and tests.

The strength of the gap - 38,984 pounds

Static Tipping Load - 37 Degree Full Turn - Tire Deflection - 32,329 lbs

Static Tipping Load - 37 Degree Full Turn - No Tire Deflection - 34,873 lbs

Sound

Note (1)

These sound values ​​are for specific operating conditions only.

Note (2)

Noise levels of the machine and the operator will vary at different speeds of the engine and / or cooling fan.

Note (3)

Hearing protection may be necessary when the machine is operated with a cab that is not properly serviced.

The note

* Distance 15 m (49.2 ft), forward movement on the second gear ratio.

At maximum cooling fan speed - Sound pressure level of the operator (ISO 6396: 2008) - 70 dB (A)

The maximum value of the cooling fan rotation speed is the level of external sound power (ISO 6395: 2008) - 109 dB (A)

With maximum cooling fan rotation speed - external sound pressure level (SAE J88: 2013) - 76 dB (A) *

At a cooling fan speed of 70% of the maximum value - the sound pressure level of the operator (ISO 6396: 2008) ** - 69 dB (A)

At a cooling fan speed of 70% of the maximum value, the level of external sound power (ISO 6395: 2008) ** - 108 LWA ***

External sound power level - ISO 6395: 2008 - 109 dB (A)

External Sound Pressure Level - SAE J88: 2013 - 76 dB (A)

Operator sound pressure level - ISO 6396: 2008 - 70 dB (A)

Note (4) - Hearing protection may also be required if doors and / or windows are open for extended periods or in noisy environments.

Taxi

ROPS / FOPS - ROPS / FOPS comply with ISO 3471 and ISO 3449 Level II

Bucket capacity

Bucket range - 3.20-7.40 m (4.19-9.68 m)

Dimensions - High Lift

Height - Top Hood - 9.3 Feet in

Height - Top of Exhaust Pipe - 11.6 Feet

Height - Top ROPS - 11.8 feet in

Ground clearance - 1.5 feet in

The center line from the rear axle to the edge of the counterweight is 8.2 feet in

Centerline of rear axle to hitch - 5.9 ft.

Wheelbase - 11.7 feet in

Total length - without bucket - 26.6 feet in

Hinge axis height at maximum lift - 15.8 ft.

Lift clearance at maximum lift 13.6 ft.

Stand back - maximum lift - 71 degrees

Stand back - bearing height - 49 degrees

Stand back on the ground - 39 degrees

Tread Width - 7.4 Feet in

Note. All dimensions are approximate and are for L3 XHA2 tires.

Hinge axis height when carrying - 2.6 feet in

Maximum Width Over Tires - 9.9 Feet in

Dimensions - Standard Lift

Height - Top Hood - 9.3 Feet in

Height - Top of Exhaust Pipe - 11.6 Feet

Height - Top ROPS - 11.8 feet in

Ground clearance - 1.5 feet in

The center line of the rear axle to the edge of the counterweight is 7.2 feet in

Centerline of rear axle to hitch - 5.9 ft.

Wheelbase - 11.7 feet in

Total Length - Without Bucket - 24 Feet

Hinge axis height at maximum lift - 14 ft.

Lifting arm clearance at maximum lift - 12 ft.

Stand back - maximum lift - 62 degrees

Stand back - bearing height - 50 degrees

Stand back on the ground - 42 degrees

Tread Width - 7.4 Feet in

Note. All dimensions are approximate and are for L3 XHA2 tires.

Hinge axis height when carrying - 2.1 feet in

Maximum Width Over Tires - 9.9 Feet in

Engine - Level 3 / Stage IIIA Equivalent

Emissions - Level 3 / Stage IIIA

Engine - Tier 4 Final / Stage IV

Emissions - Level 4 / Stage IV