Caterpillar WHEEL LOADERS 966K - catalog of spare parts
Dimensions
Length with bucket on the ground - 29.1 feet in
Tire Width - 9.7 Feet in
Height to Cab Top - 11.8 Feet in
Wheelbase - 11.3 feet in
Ground clearance - 1.6 feet in
Weights
Operating Weight - 53,311 pounds
Tires
Tires - a choice
Buckets
Bucket volume - 2.50 m3 - 9.20 m3 (3.25 m 3 - 3.00 m 3)
Choose WHEEL LOADERS 966K section:
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - C11 ACERT
Net power - 262 hp
Gross Power - 286 HP
Measured Power @ - 1800rpm
Displacement - 568cu per
Measured Torque @ - 1400 rpm
Torque boost - 38%
Aspiration - Turbocharger
Hole Diameter - 4.5 Inches
Stroke - 5.9 inches
Net Power - ISO 9249 - 267 HP
Engine Model - Cat? C9.3 ACERT?
Peak Torque - 1,400 rpm - SAE J1995 - 1,006 lb-ft
Peak Net Torque - 1,400 rpm - SAE J1349 - 940 lb-ft
Maximum net power - 1800 rpm - ISO 9249 - 267 hp
Maximum net power - 1800 rpm - SAE J1349 - 267 hp
Maximum net power - 1800 rpm - ISO 9249 - Metric - 271 hp
Maximum net power - 1800 rpm - SAE J1349 - Metric - 271 hp
Maximum net power - 1800 rpm - EEC 80/1269 - 267 hp
Maximum net power - 1800 rpm - EEC 80/1269 - metric - 271 hp
Maximum apparent power - 1800 rpm - SAE J1995 - 296 hp
Maximum apparent power - 1800 rpm - SAE J1995 - Metric - 302 hp
Operational
Operating Weight - 52,254 lbs
The capacity of the fuel tank is 100.4 gal
Hydraulic system capacity - 29 gal
9.3 gallon engine oil
Cooling capacity 10.3 gallons
Transmission fluid capacity - 11.6 gal
Front Axle / Differential Fluid Volume 16.9 gallons
Rear Axle / Differential Fluid Capacity - 16.9 gallons
Static Tipping Weight - 38,354 lbs
Turn radius - 24.2 feet in
Operating voltage - 24 V
Generator current strength - 80 amperes
Rear Axle Fluctuation - 26 degrees
Tire size - 25
Transmission
Transmission Type - POWDER
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 23.2 mph
Max. Speed - Reverse - 23.2 mph
Forward - 1 - 4.2 mph
Forward - 2 - 7.8 mph
Forward - 3 - 13.9 mph
Forward - 4 - 23.2 miles per hour
Reverse - 1 - 4.9 mph
Reverse - 2 - 8.5 mph
Reverse - 3 - 14.6 mph
Reverse - 4 - 23.9 mph
Hydraulic system
Pump Type - Piston
Safety Valve Installation - 1000
Pump productivity - 80.6 gal / min
Raise Time - 5.9sec
Dump Time - 1.6sec
Shorter time - 2.4 s
Hydraulic cycle time - total - 9.8 s
Aggregate System - Maximum Operating Pressure - 4496 psi
Hydraulic cycle time - lowering, emptying, lowering - 2.4 s
Steering System - Pump Type - Piston
Hydraulic cycle time - rise from the transfer position - 5.9 s
Hydraulic cycle time - discharge, at maximum rise - 1.5 s
Implement System - 3rd Function Optional Function: Maximum Flow Rate - 79.3 gallons / min
Implement System - Optional Feature 3rd Maximum Pressure - 3,000 psi
Unit system - maximum pump capacity at 2275 rpm - 90 gal / min
Axes
Front - Fixed
The back is hesitant? 13 degrees
The maximum rise and fall of one wheel - 19.5 inches
The brakes
Brakes - meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 standards
Dimensions
Length with bucket on the ground - 29.1 feet in
Tire Width - 9.7 Feet in
Height to Cab Top - 11.8 Feet in
Ground clearance - 1.6 feet in
Wheelbase - 11.3 feet in
Operational characteristics
The strength of the gap - 38,984 pounds
Static Tipping Load - 37 Degree Full Turn - ISO 14397-1 * - 32,259 lbs
Static Tipping Load - 37 Degree Full Turn - Rigid Tires ** - 34,886 lbs
Service replenishment options
Cooling system - 17.2gal
Carter - 6.5 gal
Hydraulic Tank - 52.3 Gallons
Fuel tank - standard - 101 gal
Gearbox - 13.2gal
Differential - Last gear - Front - 16.9gal
Differential - Last gear - Rear - 16.9gal
Taxi
ROPS / FOPS - Meets SAE and ISO Standards