Your region: United States

Caterpillar WHEEL LOADERS 950L - catalog of spare parts

The 950L wheel loader has built-in proven technologies that meet your expectations in terms of reliability, performance, fuel efficiency and long service life. This machine provides increased power; torque converter with locking clutch in a 5-speed gearbox with an intermediate shaft, providing smoother shifting, acceleration and speed increase; productive economy mode for maximum fuel economy. This machine provides the reliability, durability and versatility you expect from a Cat machine.

Choose WHEEL LOADERS 950L section:

RELIABILITY

The Cat® C7.1 ACERT ™ engine offers a combination of proven electronic, fuel and air systems.

The use of rigorous design of the components and processes of validation of machines ensures unsurpassed reliability, durability and long uptime.

STRENGTH

Rigid transmission with intermediate shaft and axles withstand extreme operating conditions.

Improved hydraulic hose routing reduces potential hose wear.

Full-flow hydraulic filtration system with additional loop filtering improves the reliability of the hydraulic system and the life of the components.

EFFICIENCY

Engine power, increased by about 22%, increases the productivity and efficiency of the machine (compared to the H series).

Torque converter with locking clutch in combination with the switching between the latches provides a smooth gear shift, fast acceleration and speed on a slope.

High-performance torque converter improves digging efficiency.

Z-joint provides high breakout force at ground level.

The optional high-lift linkage provides an increased hinge pin height, which facilitates loading in various applications.

The easily loaded buckets of the Performance series have a wider neck and curved side plates, which improve material retention (fill factor) and shorten the cycle time.

An optional fully automatic traction control system (differential lock) improves heap performance and poor foot conditions.

FUEL EFFICIENCY

Fuel consumption is up to 10% lower than that of the H series. *

The powerful ACERT engine burns less fuel, providing power and torque when needed.

Performance buckets have a longer floor that digs easily into the heap, resulting in lower fuel consumption.

Load-sensing hydraulics provide proportional flow for the unit and steering on demand.

Standard economy mode provides maximum fuel economy with minimal impact on performance.

* Actual results may vary depending on factors such as, among other things, machine configuration, operator technique, machine application, climate, etc.

EASY OPERATION

The new best-in-class operator environment provides unsurpassed comfort, visibility and efficiency.

Intuitive, ergonomic controls allow operators to focus on their work.

The optional new two-battery ride control system provides superior ride quality and reduces cab vibration.

SECURITY

Excellent access to the cabin with a wide door and staircase steps.

Floor-to-ceiling windshield, large mirrors with built-in point mirrors and a rear-view camera provide industry-leading all-round visibility.

Sturdy, relocated handrails provide secure access to the platforms.

PERFORMANCE

One-piece hinged hood with side and rear doors; Hydraulic and electrical service centers make access quick and easy.

Safe ground-level access to fuel, oil, filters, and daily maintenance points means less time required for maintenance.

The optional, fully integrated Cat Autolube system provides full monitoring of the lubrication system and an overview of diagnostic tests.

CAT CONNECT TECHNOLOGY

Monitoring, management and improvement of the site.

Cat LINK Technology: VisionLink® allows owners to wirelessly access data to monitor the condition, use, and location of the machine.

Cat DETECT technology: a built-in rearview camera improves visibility behind the machine, helping operators work safely. Optional detection of objects behind the Cat increases operator awareness of the working environment, which increases safety on site.

Cat PAYLOAD Technologies: The optional Cat Production Measurement 2.0 provides a simple and accurate on-line payload scale that allows operators to deliver accurate loads and work more efficiently. Subscribing to Advanced Productivity provides comprehensive, helpful information that helps you manage and improve the performance and profitability of your operations.

ENGINE

Displacement

428.0 in³

Engine Model

Cat C7.1 ACERT

Maximum Gross Power - 2,000 rpm - ISO 14396 - Metric

195 kW (265 hp)

Maximum Net Power - 2,000 rpm - ISO 9249 - Metric

185 kW (252 hp)

Net Power - ISO 9249

252.0 HP

Peak Gross Torque - 1,400 rpm - ISO 14396

774.0 lb/ft

Maximum Net Torque - 1,400 rpm

726.0 lb/ft

WEIGHTS

Operating Weight

39983.0 lb

Note

Weight based on a machine configuration with Michelin 23.5R25 XHA2 L3 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open/open axles (front/rear), power train guard, secondary steering, sound suppression and a 3.1 m3 general purpose bucket with BOCE.

BUCKETS

Bucket Capacities

2.7-4.4 m³ (3.5-5.8 yd³)

OPERATING SPECIFICATIONS

Breakout Force

34171.0 lbf

Static Tipping Load - Full 40° Turn - No Tire Deflection

25627.0 lb

Static Tipping Load - Full 40° Turn - With Tire Deflection

24088.0 lb

Note (1)

For a machine configuration as defined under ?Weight.?

Note (2)

Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

TRANSMISSION

Forward - 1

4.3 mile/h

Forward - 2

7.5 mile/h

Forward - 3

12.0 mile/h

Forward - 4

16.0 mile/h

Reverse - 1

4.3 mile/h

Reverse - 2

7.5 mile/h

Reverse - 3

16.0 mile/h

Forward - 5

24.5 mile/h

Note

Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm roll radius.

HYDRAULIC SYSTEM

Hydraulic Cycle Time - Total

9.5 s

Implement Pump Type

Variable Axial Piston

Implement System - Maximum Operating Pressure

4047.0 psi

Implement System - Maximum Pump Output at 2,340 rpm

64.7 gal/min

SERVICE REFILL CAPACITIES

Cooling System

14.3 gal (US)

Crankcase

5.3 gal (US)

Differential - Final Drives - Front

11.4 gal (US)

Differential - Final Drives - Rear

11.4 gal (US)

Fuel Tank

72.6 gal (US)

Hydraulic Tank

33.0 gal (US)

Transmission

11.4 gal (US)

SOUND

With Cooling Fan Speed at Maximum Value - Exterior Sound Power Level (ISO 6395:2008)

107.0 dB(A)

With Cooling Fan Speed at Maximum Value - Exterior Sound Pressure Level (SAE J88:2013)

75 dB(A)*

With Cooling Fan Speed at Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)

72.0 dB(A)

Note (1)

*Distance of 15 m, moving forward in second gear ratio.

Note (2)

**For machines in countries that adopt the ?EU Directives.?

Note (3)

***European Union Directive ?2000/14/EC? as amended by ?2005/88/EC.?

With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**

104 LWA***

With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**

69.0 dB(A)

ENGINE - TIER 3/STAGE IIIA EQUIVALENT

Emissions

Tier 3/Stage IIIA

BUCKET CAPACITIES

Bucket Range

2.7-4.4 m³ (3.5-5.8 yd³)

DIMENSIONS - HIGH LIFT

Centerline of Rear Axle to Edge of Counterweight

6.83 ft

Centerline of Rear Axle to Hitch

5.5 ft

Ground Clearance

1.21 ft

Height - Top of Exhaust Pipe

11.2 ft

Height - Top of Hood

8.83 ft

Height - Top of ROPS

11.33 ft

Hinge Pin Height at Carry Height

2.51 ft

Hinge Pin Height at Maximum Lift

14.73 ft

Lift Arm Clearance at Maximum Lift

12.45 ft

Maximum Width - Over Tires - Loaded

9.33 ft

Note

All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Overall Length - Without Bucket

24.37 ft

Rack Back - Carry Height

54 degrees

Rack Back - Maximum Lift

66 degrees

Rack Back at Ground

45 degrees

Tread Width

7.0 ft

Wheel Base

11.0 ft

DIMENSIONS - STANDARD LIFT

Centerline of Rear Axle to Edge of Counterweight

6.83 ft

Centerline of Rear Axle to Hitch

5.5 ft

Ground Clearance

1.21 ft

Height - Top of Exhaust Pipe

11.2 ft

Height - Top of Hood

8.83 ft

Height - Top of ROPS

11.33 ft

Hinge Pin Height at Carry Height

2.18 ft

Hinge Pin Height at Maximum Lift

13.11 ft

Lift Arm Clearance at Maximum Lift

11.19 ft

Maximum Width - Over Tires - Loaded

9.33 ft

Note

All dimensions are approximate and based on Michelin 23.5R25 XHA2 L3 radial tires.

Overall Length - Without Bucket

22.77 ft

Rack Back - Carry Height

49 degrees

Rack Back - Maximum Lift

60 degrees

Rack Back at Ground

41 degrees

Tread Width

7.0 ft

Wheel Base

11.0 ft