Caterpillar WHEEL LOADERS 938H - catalog of spare parts
Bucket
Clearance at Max Raise - 9.08 ft in
Dimensions
Length with bucket on the ground - 24.1 feet in
Tire Width - 8.8 Feet in
Cabin height - 11 feet.
Ground clearance - 1.3 feet in
Wheelbase - 9.9 feet in
Articulated Finger - Maximum Height - 12.6 Feet
Reaching for Max Lift and Dump - 3.5 feet.
Total length - 23.6 feet in
Wheelbase - 9.8 feet in
The angle of incidence at maximum lift - 50 degrees
Height - Top ROPS / FOPS - 11 Feet
Ground clearance at maximum lift - 45 degrees - 9.5 feet in
Reach at a maximum lift and drop of 45 degrees
A-pillar angle - maximum lift - 65 degrees
Back support angle - carry - 50 degrees
Bucket Finger Height - Maximum Lifting Height - 12.6 Feet
Digging Depth - 1.9 inches
Choose WHEEL LOADERS 938H section:
| 8T2275 | 8T2275 | Caterpillar | View |
| 2P1373 | BRG | Caterpillar | View |
| 3T3008 | 3T3008 | Caterpillar | View |
| 7T8682 | GEAR | Caterpillar | View |
| 7T8698 | 7T8698 | Caterpillar | View |
| 6Y1758 | GEAR | Caterpillar | View |
| 4V8674 | BEARING | Caterpillar | View |
| 7P3454 | BEARING | Caterpillar | View |
| 4V2872 | BUSHING | Caterpillar | View |
| 4V2873 | BUSHING | Caterpillar | View |
| 4V2879 | BUSHING | Caterpillar | View |
| 4V2883 | BRG SLEEVE | Caterpillar | View |
| 5V1007 | 5V1007 | Caterpillar | View |
| 6Y2538 | 6Y2538 | Caterpillar | View |
| 2P8986 | CUP | Caterpillar | View |
| 2P8987 | CONE BEARING | Caterpillar | View |
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - 6.6 ACERT
Net power - 180hp
Gross Power - 197 HP
The measured power @ - 2200 rpm
Displacement - 402.8 cubic meters.
Maximum. Torque - 620
Torque increase - 38%
Boredom - 4.1 inches
Stroke - 5 inches
EEC 80/1269 - 180 HP
Rated net power - 172 hp
SAE J1349 - 172 HP
ISO 9249 (1997) - 180 HP
Operational
Working Weight - 33190 lbs
65.3 gallon fuel tank capacity
23.5 gallon hydraulic capacity
4.6 gallon engine oil
Cooling capacity 9.5 gallons
Transmission Fluid Capacity - 11.4 Gallons
Front Axle / Differential Fluid Capacity - 15.1 gallons
Rear axle / differential fluid volume - 14 gallons
Static tipping weight - 25.551 kg.
Turn radius - 39.5 feet in
Operating voltage - 24 V
Generator current strength - 80 amperes
Rear Axle Fluctuation - 24 degrees
Tire size - 20.5R25
Transmission
Transmission Type - Powershift
The number of forward gears - 4
Number of reverse gears - 3
Top Speed - Forward - 26.8 Mph
Maximum. Speed - Back - 15.8 mph
Forward - 1 - 5 miles per hour
Reverse - 1 - 5 mph
2 - 9.1 mph
3 - 15.8 mph
4 - 26.8 mph
Weights
Working Weight - 33190 lbs
Tires
Size - 20.5 R25
Buckets
Bucket volume - 2.3 m3 - 3.0 m3 3.0 cubic meters M - 4.0 cubic meters
Hydraulic system
Type of pump - piston
Safety Valve Installation - 1000
Pump productivity - 77.9 gal / min
Raise Time - 5.4sec
Dump Time - 1.4sec
Shorter time - 2.7 s
Bucket
Breakthrough Power - 27,576 pounds
Ground clearance at maximum lift - 9.1 feet per
Bucket Width - 8.9 Feet in
Bucket Capacity - Bulk - 3.7yd3
Bucket Capacity - Pierced - 3.2yd3
Dimensions
Length with bucket on the ground - 24.08 feet in
Tire Width - 8.75 Feet in
Cabin height - 11 feet.
Wheelbase - 9.83 feet in
Ground clearance - 1.25 feet in
Articulated finger - maximum height - 12.58 feet in
Reaching for Max Lift and Dump - 3.5 feet.
Performance characteristics
Static Tipping Load - Full Turn - 22,207 lbs
Breakthrough Power - 27,576 pounds
Unloading clearance at full lift and tilt angle of 45 degrees - 9.4 feet per
Service replenishment options
Cooling System - 9.5 Gallons
Fuel Tank - 65.3 Gallons
Engine crankcase - 4.6gal
Hydraulic Tank - 23.5 Gallons
Transmission - 11.4 gallons
Taxi
ROPS - SAE J1040 APR88, ISO 3471: 1994
FOPS - SAE J1040 APR88, ISO 3471: 1994
Loader hydraulic system
Rise - 5.4 s
Blade - 1.4 s
Lower, lower, lower - 2.7 s
Total - 9.8 s
Hydraulic Cycle Time - 9.5