Caterpillar WHEEL LOADERS 930K - catalog of spare parts
Dimensions
Overall Length - 24.7ft in
Wheel Base - 9.8ft in
Dump Angle at Maximum Lift - 49degrees
Height - Top of ROPS/FOPS - 10.9ft in
Height - Center of Axle - 2.2ft in
Centerline of Front Axle to Hitch - 4.9ft in
Dump Clearance at Maximum Lift - 45 degrees - 9.3ft in
Reach at Maximum Lift and 45 degrees Dump - 3.4ft in
Rack Back Angle - Maximum Lift - 54degrees
Rack Back Angle - Carry - 45degrees
Carry Height - 1.5ft in
Overall Height - Bucket Raised - 16.8ft in
Bucket Pin Height - Maximum Lift - 12.8ft in
Length - Rear Axle to Bumper - 6.5ft in
Digging Depth - 3.8in
Choose WHEEL LOADERS 930K section:
7P8753 | 7P8753 | Caterpillar | View |
6Y2737 | CUP | Caterpillar | View |
6Y2736 | 6Y2736 | Caterpillar | View |
1P3935 | CONE | Caterpillar | View |
1P3934 | CUP-BEARING | Caterpillar | View |
6V0347 | CONE | Caterpillar | View |
4V8643 | BEARING | Caterpillar | View |
4V8631 | BUSHING | Caterpillar | View |
5P3723 | 5P3723 | Caterpillar | View |
6V1194 | CUP | Caterpillar | View |
7P3466 | BEARING | Caterpillar | View |
7P3454 | BEARING | Caterpillar | View |
7P3194 | 7P3194 | Caterpillar | View |
7T9122 | 7T9122 | Caterpillar | View |
3P1210 | CONE | Caterpillar | View |
1P6872 | 1P6872 | Caterpillar | View |
6V8795 | CONE | Caterpillar | View |
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - C7.1 ACERT
Net power - 152 hp
Gross Power - 154 HP
Displacement - 402cu per
551 lb ft net torque
Max. Torque - 580
4 inch diameter
Stroke - 5 inches
EEC 80/1269 - 156 HP
Rated net power - 154 hp
SAE J1349 - 154 HP
ISO 9249 (1997) - 156 HP
operational
Working Weight - 28,948 lbs.
51.5 gallon fuel tank capacity
Hydraulic Capacity - 43.6 Gallons
Cooling system capacity - 8.5gal
Transmission fluid capacity - 2.2gal
6.9 gallon front axle / differential fluid
Rear Axle / Differential Fluid Capacity - 6.9 Gallons
Tire size - 20.5
Transmission
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 25 Mph
Max. Speed - Reverse - 25 mph
Forward - 1 - 8 miles per hour
Reverse - 1 - 8 mph
2 - 8 miles per hour
3 - 17 miles per hour
4 - 25 miles per hour
Maximum standard speed 25 mph
Steering
Turning angle - in each direction - 40 degrees
Steering Cylinder, Two, 2.8 inch Hole
3500 psi maximum operating pressure
Steering joint - 40 degrees
Weights
Working Weight - 30,479 pounds
Tires
Size - 20.5 R25 Radial (L-3)
Buckets
Bucket volume - 2.1 m3 - 5.0 m3 2.7 m3 - 6.5 m 3
Hydraulic system
Safety Valve Installation - 3626
Pump productivity - 50 gal / min
Lifting Time - 5.7sec
Dump time - 1.7sec
Shorter time - 2.7 s
Performance characteristics
Static Tipping Load - Full Turn - 18,444 lbs.
Joint angle - 40 degrees
Achieve - a full rise and reset of 45 degrees - 3.4 feet in
Unloading clearance at full lift and a dump angle of 45 degrees - 9.3 feet per
Service replenishment options
Cooling system - 7.9 gal
Fuel Tank - 51.5 Gallons
Carter - 5.3 gal
Hydraulic Tank - 23.8 gal
Hydraulic system - including tank - 43.6 gallons
Gearbox - 2.2gal
Front - 6.9gal
6.6gal behind
Taxi
ROPS - SAE J1040 MAY94, ISO 3471-1994
FOPS - SAE J / ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Loader hydraulic system
Pump Consumption - Implement Pump - 50 gal / min
Maximum Working Pressure - 3626 psi
Rise - 5.1 s
Blade - 1.5 s
Lower, lower, lower - 2.7 s
Total - 9.3 s
Hole (1) - 4.7 inches
Stroke (1) - 28.7 inches
Hole (2) - 5.9 inches
Stroke (2) - 21.9 inches
Hydraulic cycle time - 9.3 sec