Caterpillar WHEEL LOADERS 924F - catalog of spare parts
Bucket
Unloading clearance at maximum lift - 8.86 feet per
Dimensions
Length with bucket on the ground - 21.5 feet in
Tire Width7.7 ft. In
Total height - 10.3 feet in
Height to Cab Top - 10.3 ft.
Wheelbase - 8.9 feet in
Articulated Finger - Maximum Height - 11.8 Feet
Reach in Max Lift and Dump - 2.9 feet in
Wheelbase - 8.8 feet in
Width - Over Tires - 7.7 Feet in
Height - Top ROPS / FOPS - 10.3 feet in
Rear Post Angle - Wear - 45 degrees
Bucket Finger Height - Maximum Lift Height - 11.8 Feet
Choose WHEEL LOADERS 924F section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - 3114
Net power - 105 hp
Gross Power - 111hp
Measured Power @ - 2400rpm
Displacement - 268cu in
Aspiration - Turbocharged
Rated net power - 105 hp
operational
Operating Weight - 19896.8 lbs
Fuel Tank Capacity - 41.5 gallons
Hydraulic Capacity - 20.4 Gallons
2.7 gallon engine oil
Cooling Capacity 9.3 Gallons
Transmission fluid capacity - 6.1 gal
5.6 gallon front axle / differential fluid volume
Rear Axle / Differential Fluid Capacity - 5.6 gallons
Static Tipping Weight - 15879.9 lbs.
Rear Axle Fluctuation - 24 degrees
Tire size - 17.5-25
Transmission
Transmission Type - Powershift
The number of forward gears - 4
Number of reverse gears - 3
Top Speed - Forward - 23.9 mph
Max. Speed - Reverse - 14.8 mph
Forward - 1 - 4.5 miles per hour
Reverse - 1 - 4.5 mph
2 - 8.2 mph
3 - 14.7 mph
4 - 23.8 mph
Steering
Minimum turning radius - over tires - 201 inches
Steering joint - 40 degrees
Weights
Working Weight - 20081 lbs.
Additional counterweight - 566 pounds
Tires
Tread Width - 6.1 Feet in
Size - 17.5-25
Buckets
Bucket Width - 7.8 Feet in
Hydraulic system
Safety Valve Installation - 3600
Pump productivity - 34.9 gal / min
Raise Time - 4.3sec
Dump time - 1.3 sec.
Shorter time - 2.7 s
Bucket
Mine clearance at Max Raise - 8.9 feet in
Bucket Width - 7.9 Feet in
Bucket Capacity - Piled - 2.3yd3
Bucket Capacity - Pierced - 1.9yd3
Axes
Axis Swing - 12 degrees
Dimensions
Length with Bucket on Ground - 21.41 Feet in
Tire Width - 7.64 Feet in
Height to Cab Top - 10.29 Feet in
Wheelbase - 8.86 ft in
Articulated finger - maximum height - 11.78 feet in
Reach in Max Lift and Dump - 2.81 feet in
Performance characteristics
Static Tipping Load - Full Turn - 13,885 lbs
Breakout Power - 21067 pounds
Joint angle - 40 degrees
Achieve - full rise and discharge of 45 degrees - 2.8 feet in
Unloading clearance at full lift and a dump angle of 45 degrees - 8.8 feet per
Bucket Capacity - with bolt-on cutting edge - 1.8yd3
Service replenishment options
Cooling system - 9.3 gal
Fuel tank - 41.5 gal
Crankcase Protection - 2.7 gal
Hydraulic tank - 14 gal
Hydraulic system including tank - 20.4 gallons
Gearbox - 6.1gal
Front - 5.6gal
Rear - 5.6gal
Loader hydraulic system
Pump Consumption - Implement Pump - 35 gal / min
Rise - 4.3 s
Blade - 1.3 s
Lower, lower, lower - 2.7 s
Total - 8.3 s
Hydraulic Cycle Time - 8.3 s
Pressure Relief - Implement Pump - 3,600 psi