Caterpillar WHEEL LOADERS 908M - catalog of spare parts

 

Specifications

engine

Net power - 74 hp

Displacement - 201cu per

Hole Diameter - 3.7 inches

4.7 inch travel

Emissions

* Cat C3.3B DIT engine complies with US EPA Tier 4 Final / EU Stage IIIB emission standards or equivalent Tier 4 Interim / Stage IIIA emission standards.

Engine Model - Cat C3.3B DIT *

Note (1)

Net power ratings are tested under standard conditions for the specified standard.

Note (2)

The net power shown is the power available on the flywheel when the engine is equipped with an alternator, air cleaner, exhaust filter and fan at minimum speed.

Note (3)

No performance degradation is required up to 3,000 m (10,000 ft). Auto derate protects hydraulic and transmission systems.

Note (4)

Flywheel according to actual SAE conditions with fan at maximum speed.

Note - * Meets US EPA emission standards of Level 4 Final / EU Stage IIIB (M series) or Level 4 Interim / Stage IIIA (M series [EUSO]).

Maximum apparent power - SAE J1995 - 74 hp

Maximum net power - SAE J1349 - 68 hp

Maximum apparent power - ISO 14396 - 73 hp

Rated net power - 2500 rpm - SAE J1349 - 68 hp

Maximum net power - ISO 9249 - 69 hp

Maximum gross power - 73 hp

Maximum apparent power - ISO 14396 (DIN) - 74 hp

Maximum Torque - ISO 14396 - 192 lb-ft

Maximum Net Torque - SAE J1349 - 189 lb-ft

Maximum Net Torque - ISO 9249 (1977) / EEC 80/1269 - 191 lb-ft

Note (5) - The Cat C3.3B Tier 4 Final / Stage IIIB uses an active regeneration system that does not require operator interaction under normal conditions.

Rated net power - 2400 rpm - SAE J1349 - 73 hp

Rated net power - 2400 rpm - ISO 9249 (1977) / EEC 80/1269 - 74 hp

 

A train

Forward - Range 1 - 6 mph

Forward - Range 2 - 12 mph

Ahead - High Range - 22 mph

Reverse - Range 1 - 6 mph

Reverse - Range 2 - 12 mph

Reverse - High Range - 22 mph

 

Operational

Working Weight - 14032 lbs

 

Steering

Maximum Working Pressure - Steering Pump - 3191 psi

Steering joint angle - in each direction - 39 degrees

Double Acting Steering Cylinder - Bore Diameter - 3.1in

Double Acting Steering Cylinder - 1.4 Inch Diameter

Double Acting Steering Cylinder - Stroke - 11.8 Inches

Nominal flow rate - steering pump - 12 gal / min

Maximum Steering Torque - 0 Degrees (Macine Straight) - 42,506 lb-ft

Maximum Steering Torque - 39 Degrees (Full Turn) - 31,398 Lb-ft

Steering AC cycle time - from full left to full right - 2620 rpm - 3 s

The number of revolutions of the steering wheel - from full left to full right or from full right to full left - <6 turns

 

Weights

Working Weight - 14032 lbs

 

Tires

Option (1) - 360/80 R20 TRI2 Nokian

Option (2) - 375/75 R20 XZSL Michelin

Option (3) - 400/70 R20 XMCL Michelin

Option (4) - 400/70 R20 Bibload Michelin

Option (5) - 405/70 R20 SPT9 Dunlop

Option (6) - 12.5-20 ATU Firestone

 

Buckets

Bucket volume - 0.9 m3-1.5 m3 (1.2 s3 to 2.0 s3)

Bucket Capacity - ISO Coupling - 0.9-1.5 m3

Bucket Capacity - SSL Style Connector - 1.2-2.0 yd3

General purpose - 1.1-1.3 m3 (1.44-1.7 m3)

Lightweight Material - 2yd3

 

Hydraulic system

Hydraulic cycle time - dump - 1.3 s

Main Relief - 3rd Auxiliary Stream: Standard - 22 gallons / min

Major Relief - 3rd Auxiliary Flow - 3,400 psi

Main Relief - 3rd Auxiliary Stream: High Flow - 34 gallons / min

Hydraulic Cycle Time - Rise - 5.2 s

Hydraulic Cycle Time - Rackback - 2.1 s

Hydraulic cycle time - lower - 3.2 s

 

Performance characteristics

Nominal bucket capacity - 1.4yd3

8311 lb full load tipping load

Tipping Load - Direct - ISO 14397-1 - 9757 lbs.

Tipping Load - Full Turn - ISO 14397-1 - 7947 lbs

Ground Clearance - Full Lift and 45 Degree Dump - 8 ft. In

Achieve - full lift and 45-degree drop - 3 feet in

Steering joint angle - in each direction - 39 degrees

 

Service replenishment options

Cooling system - 4.4 gal

Fuel tank - 20.6 gal

Hydraulic Tank - 12.2 Gallons

Hydraulic system - including tank - 19 gal

Crankcase - 3gal

Gearbox - gearbox - 2.9gal

Hydraulic system - 18.5 gal

Engine oil - 3gal

 

Taxi

ROPS - SAE J1040 MAY94, ISO 3471-1994.

FOPS - SAE J / ISO 3449 APR98, Level II, ISO 3449 1992 Level II.

 

Loader hydraulic system

Double Action Lift Cylinder - Stroke - 27.5 Inches

Double Action Tilt Cylinder - Stroke - 16.4in

Maximum Flow - Implement Pump - 22 gallons / min

3rd Function Maximum Pressure - 3408 psi

Maximum Working Pressure - Implement Pump - 3408 psi

Pressure Relief - Tilt Cylinder Rod - 2756 psi

Maximum boost pressure - 3191 psi

Double Acting Lifting Cylinder - 3.3 Inch Diameter

Double Acting Lifting Cylinder - Bar Diameter - 2 Inches

Double Action Tilt Cylinder - Hole Diameter - 3.9 Inches

Double Action Tilt Cylinder - Rod Diameter - 2.2 Inches

Hydraulic cycle time - 1800 rpm - rise, ground level to maximum rise - 5.5 s

Hydraulic cycle time - 1800 rpm - unloading at a maximum lift height - 1.5 s

Hydraulic cycle time - 1800 rpm - swimming down, maximum rise to ground level - 2.6 s

Hydraulic cycle time - 1800 rpm - Total cycle time - 9.6 s

Hydraulic cycle time - 1000 rpm - rise, ground level to maximum rise - 9.6 s

Hydraulic cycle time - 1000 rpm - unloading at maximum lift height - 3 s

Hydraulic cycle time - 1000 rpm - swimming down, maximum rise to ground level - 2.6 s

Maximum flow rate - Implement pump - Auxiliary function Standard flow rate - 22 gal / min

Maximum flow rate - Implement pump - Auxiliary function High flow rate - 33 gallons / min

Pressure Relief - Tilt Cylinder Head - 4,496 psi

 

Dimensions - with ISO coupling - approximate

Turn Radius - Inner Tire - 6.8 Feet

Turn radius - above bucket - 14.9 feet in

Digging Depth - 3.9 Inches

Height Load - 10.5 Feet in

Ground clearance - 13in

Articulated finger at maximum height - 11.2 feet per

Joint angle - degrees - 39

Maximum Fork Height - 10.9 Feet in

Total length - with bucket - 18.5 feet in

Maximum reach - 4.3 feet per

Total length - with forks - 19.7 feet in

Departure angle - degrees - 33

Wheelbase - 7.1 Feet

Departure forks at maximum height - 1.5 feet in

Fork Height at Maximum Departure - 4.8 Feet in

Maximum Blade Height - 8.6 Feet in

2.8 inches below ground level

Machine Width - 6.5 Feet in

Tire measure - 5.2 feet in

Dump angle at maximum height - degrees - 45

Width - Bucket - 6.8 Feet in

Reach at ground level - 2.6 feet in

Cabin Height - 8.7 Feet in

Departure at maximum blade height - 2.5 feet per

 

Dimensions - with SSL connector - approximate

Turn Radius - Inner Tire - 6.8 Feet

Turn Radius - Above Bucket - 15 ft.

Digging Depth - 3.7 inches

Maximum Blade Height - 8.3 Feet in

Depth of the fork above the ground - 1.2 inches

Height Load - 10.5 Feet in

Machine Width - 6.5 Feet in

Ground clearance - 13in

Articulated finger at maximum height - 11.2 feet per

Joint angle - degrees - 39

Maximum Fork Height - 10.8 Feet in

Total length - with bucket - 18.9 feet in

Maximum reach - 4.7 feet per

Total length - with forks - 20.2 feet in

Departure angle - degrees - 33

Wheelbase - 7.1 Feet

Departure forks at maximum height - 1.9 feet per

Fork height at maximum reach - 5 feet in

Tire measure - 5.2 feet in

Dump angle at maximum height - degrees - 45

Width - Bucket - 6.8 Feet in

Reach at ground level - 3 feet in

Cabin Height - 8.7 Feet in

Departure at a maximum blade height of 2.8 feet

 

Maximum Material Density - General Purpose Bucket

Bucket Width - 81 Inch

Maximum Material Density - 2611 lbs / yard

Nominal Capacity - 1.4yd3

Blade Height - 100 Inches

 

Maximum Material Density - Lightweight Bucket

Bucket Width - 82 inches

Maximum Material Density - 1743 lbs / yard

Rated Power - 2yd3

Blade Height 92 Inches

 

Maximum Material Density - Multipurpose Bucket

Bucket Width - 81 Inch

Maximum Material Density - 3251 lbs / yard

Nominal Capacity - 1.2yd3

Blade Height 104 Inches

 

Performance Specifications - ISO Coupling

Nominal bucket capacity - 1.4yd3

Nominal Full Load Turnover - Bucket - 4,438 lbs

Tire size - 405/70 R20

Direct Tipping Load - Bucket - 10,891 lbs.

Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 1.25 stability, and 500 mm [20 in] load center) - 5561 lbs.

Breakout Force - Bucket - 13,712 lbs

Full Turn Static Tipping Load - Bucket - 8874 lbs

Stand back - transport position - 52

 

Performance Specifications - SSL Coupler

Nominal bucket capacity - 1.4yd3

Nominal Full Load Turnover - Bucket - 4,156 pounds

Tire size - 405/70 R20

Direct Tipping Load - Bucket - 10,207 lbs

Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 1.25 stability and 500 mm [20 in] load center) - 5192 lbs.

Breakout Force - Bucket - 10,566 lbs.

Full Turn Static Tipping Load - Bucket - 8311 lbs

Stand back - transport position - 52

 

Travel speeds

Speed ​​1 - 6.2 mph

Speed ​​2 - 12.4 mph

High Speed ​​- 21.7 mph

 

Cabin Features - Canopy

Rear Knock Mirrors - Standard

Lockable Storage Box - Standard

Sun Visor - Standard

Cup Holder - Standard

Vinyl Suspension Seat - Standard

Adjustable Interior Mirror - Standard

Hook - Standard

Fixed steering column - standard

 

Cab Features - Comfort Cab

Left Window - Sliding - Standard

Cat Radio / CD / MP3 / WMA / AUX - optional

Sun Visor - Standard

Heater - Standard

Rear window defroster - standard

Adjustable Steering Column - Standard

Cup Holder - Standard

Air conditioning optional

Lockable Storage Box - Standard

Suspension seat, armrest - standard

Hook - Standard

Rear Knock Mirrors - Standard

Radio kit (wiring, speaker, antenna and grilles) - optional

Rear Curtain - Optional

Two Access Doors - Standard

Adjustable Interior Mirror - Standard

Cabin Light - Standard

Machine Security System - Optional

 

Cab Features - Deluxe Cab

Air conditioning optional

Machine Security System - Optional

Cat Radio / CD / MP3 / WMA / AUX - optional

Adjustable Interior Mirror - Standard

Rear Curtain - Optional

Adjustable Steering Column - Standard

Rear window defroster - standard

Hook - Standard

Rear Knock Mirrors - Standard

Fabric, electric air suspension, armrest, lumbar support and heated rear seat - standard

Cup Holder - Standard

Lockable Storage Box - Standard

Sun Visor - Standard

Two Access Doors - Standard

Left Window - Sliding - Standard

Cabin Light - Standard

Heater - Standard

Radio kit (wiring, speaker, antenna and grilles) - standard

Right Window - Sliding - Standard

 

Dimensions with Bucket (approximate) - Standard Lift - With SSL Connector

Height - From Ground To Cabin ** - 8.7 Feet In

Height - ground clearance ** - 1.1 feet in

Length - Wheelbase - 7.1 Feet in

Length - Total * - 19 ft.

Reach - Bucket 45 degrees * - 2.9 feet in

Digging Depth ** - 4.2 inches

Ground clearance - 45 degree bucket * - 8.2 feet per

Ground clearance - level bucket ** - 10.5 feet in

Height - Bucket Pin ** - 11.2 ft.

Width - Bucket - 6.8 Feet in

Width - Tread Center - 5.1 Feet in

Turn radius - above bucket - 14.9 feet in

Turn Radius - Inside Tires - 6.8 Feet in

Machine Width - 6.5 Feet in

Dump angle at full rise - 45 degrees

Departure angle - 33 degrees

Joint angle - 39 degrees

Note (1) - * Depends on the bucket.

Note (2) - ** Bus dependent.

Note (3). The dimensions shown are for a machine with general purpose buckets, bolt-on cutting edges, an operator weighing 75 kg (165 lbs), no air conditioning, and Dunlop 405/70 SPT9 tires.