Your region: United States

Caterpillar WHEEL LOADERS 907H2 - catalog of spare parts

Dimensions

Digging Depth - 3.5 inches

Ground clearance - 1 foot in

Cab Height - 8.5 Feet in

Wheelbase - 7.2 Feet

Maximum reach - 4.2 feet per

Maximum Blade Height - 7.9 Feet in

Total length - with bucket - 18.4 feet in

Departure angle - degrees - 34 degrees

Fork Height at Maximum Departure - 4.9 Feet

Turn Radius - Inner Tire - 7.4 ft.

Width - Bucket - 6.7 Feet in

Tire measure - 4.7 feet in

Machine Width - 6 Feet in

Departure at maximum blade height - 2.7 feet

10 ft. In height

Hinge pin at maximum height - 10.6 feet per

Total length - with forks - 19.5 feet in

Reach at ground level - 2.5 feet in

Fork Depth Above Ground - 1.8 Inches

Maximum Fork Height - 10.4 Feet in

Departure pitchfork at maximum height - 1.7 feet in

Turn radius - above bucket - 14.9 feet in

Joint angle - degrees - 39 degrees

Dump angle at maximum height - degrees - 45 degrees

Choose WHEEL LOADERS 907H2 section:

1T0994 BEARING-BALL Caterpillar View
2S0480 CUP Caterpillar View
6Y6846 6Y6846 Caterpillar View

 

Specifications

engine

Engineering model

Net power - 69hp

Displacement - 203cu per

Hole - 3.7 inches

4.7 inch travel

Maximum apparent power - SAE J1995 - 74 hp

Maximum net power - SAE J1349 - 68 hp

Maximum apparent power - ISO 14396 - 73 hp

Rated net power - 2500 rpm - SAE J1349 - 68 hp

Maximum net power - ISO 9249 - 69 hp

Gross Power - 2500 rpm - SAE J1995 - 74 hp

Net power - 2500 rpm - SAE J1349 - 68 hp

 

Transmission

Speed ​​1 - 4.3 miles per hour

Speed ​​2 - 12.4 mph

High Speed ​​- 21.7 mph

 

Weights

Working Weight - 12,809 lbs.

 

Buckets

Bucket volume - 0.75-1.2 m3 (0.98-1.6 m3)

 

Hydraulic system

Hydraulic cycle time - dump - 2 seconds

Hydraulic Cycle Time - Lift - 5 Seconds

Hydraulic Cycle Time - Rackback - 2.5 seconds

The main relief is 3,400 psi

Hydraulic cycle time - lower, float - 4 seconds

3rd auxiliary stream - standard stream - 22 gallons / min

3rd Auxiliary Flow - High Flow - 33 gallons / min

 

Performance characteristics

Tear Off - 9,442 lbs

Nominal bucket capacity - 1.3yd3

Tire size - 405/70 R18

Full Turn Static Tipping Load - Bucket - 6,989 pounds

Stand back - transport position - 52 degrees

Rated Full Load Turnover Load - Bucket - 3,494 lbs.

7194 lb hydraulic lift capacity

Direct Tipping Load - Bucket - 9,524 lbs.

Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 500 mm (20 in) load center, 100 mm (4 in) transport above ground) - 6,140 pounds

Nominal full-load workload - forks (EN 474-3: 2006, firm and flat surface, 1.25 stability and 500 mm [20 in] load center) - 4,674 pounds

Nominal full-load workload - forks (SAE J1197, center of load at mid-point of teeth, teeth 1120 mm [44 inches)) (50% FTSTL) - 2721 lbs

Nominal full-revolution workload - forks (SAE J1197, mid-point load center, 1220 mm [48 in] teeth) (50% FTSTL) - 2,608 pounds

Nominal Workload, Straight Rear - Forks (SAE J1197, Mid-Point Load Center, 1120 mm [44 in. Teeth)) (50% FTSTL) - 3543 lbs.

Nominal Workload, Straight Back - Forks (SAE J1197, Mid-Point Load Center, 1220 mm [48 in] Teeth) (50% FTSTL) - 3,470 pounds

Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 500 mm [20 in] load center) (80% of FTSTL) - 4,674 lbs.

Nominal full-load workload - forks (EN 474-3: 2006, hard and flat surface, 500 mm [20 in] load center) (60% of FTSTL) - 3505 lbs

 

Service replenishment options

Cooling system - 6.3 gal

Fuel tank - 20.6 gal

Hydraulic system - 25gal

Engine oil - 2.6gal

 

Taxi

ROPS - SAE J1040 MAY94, ISO 3471-1994

FOPS - SAE J / ISO 3449 APR98 Level II, ISO 3449 1992 Level II

 

Maximum Material Density - General Purpose

Nominal Capacity - 1.3yd3

Blade Height 94 Inches

Maximum Material Density - 2670 lbs / yard

Bucket Width - 80 Inches

 

Maximum Material Density - Lightweight Material

Nominal Capacity - 1.6yd3

Blade height 90 inches

Maximum Material Density - 2053 lbs / yard

Bucket Width - 82 inches

 

Maximum Material Density - Multipurpose

Rated Power - 1yd3

Blade height - 97 inches

Maximum Material Density - 3622 lbs / yard

Bucket Width - 74 inches

 

Operator Environment Features - Canopy

Fixed steering column - standard

Vinyl Suspension Seat - Standard

Hook - Standard

Sun Visor - Standard

Outside Mirrors (2) - Knock Back - Standard

Lockable Storage Box - Standard

Adjustable interior mirror - standard

 

Operator Environment Features - Comfort Cab

Two Access Doors - Standard

Adjustable Steering Column - Standard

Seat suspension, armrest - standard

Left Window - Sliding - Standard

Rear window defroster - standard

Hook - Standard

Cabin Light - Standard

Sun Visor - Standard

Radio kit (wiring, speaker, antenna and grilles) - standard

Outside Mirrors (2) - Knock Back - Standard

Heater - Standard

Lockable Storage Box - Standard

Adjustable interior mirror - standard

Rear Curtain - Optional

Radio Cat / CD / MP3 / WMA Player - optional

 

Operator Environment Features - Deluxe Cab

Two Access Doors - Standard

Rear window defroster - standard

Hook - Standard

Cabin Light - Standard

Adjustable Steering Column - Standard

 

Air-conditioned fabric seat, armrest, lumbar support, rear heated seat - standard

Left Window - Sliding - Standard

Right Window - Sliding - Standard

Air Conditioner - Standard

Rear Curtain - Optional

Radio Cat / CD / MP3 / WMA Player - optional

Sun Visor - Standard

Radio kit (wiring, speaker, antenna and grilles) - standard

Outside Mirrors (2) - Knock Back - Standard

Heater - Standard

Lockable Storage Box - Standard

Adjustable interior mirror - standard