Caterpillar WHEEL LOADERS 902 - catalog of spare parts
Dimensions
Length with bucket on the ground - 17 feet in
Tire Width - 5.6 Feet in
Ground clearance - 1.3 feet in
Tread Width - 54 inches
Operational characteristics
Breakout Power - 8,320 pounds
Nominal bucket capacity - 0.8yd3
Blade height at full lift - 7.7 feet in
Articulation - 43 degrees
Oscillation +/- - 11 degrees
Full Turn Static Tipping Load - 5,700 lb Bucket
Stand back - transport position - 50 degrees
Rated Full Load Turnover Load - Bucket - 2,860 pounds
Hydraulic Lift Payload - 7,800 lbs
Direct Tipping Load - 6,600 lb Bucket
Reach - Without Teeth - 2.8 Feet
Rated Full Load Turnover Load - Pitchfork - 3,520 lbs
Full Turn Static Tipping Load - Fork - 4,400 pounds
Choose WHEEL LOADERS 902 section:
| 2S0480 | CUP | Caterpillar | View |
| 7T8419 | BEARING | Caterpillar | View |
| 7T9344 | CONE | Caterpillar | View |
| 7T9345 | CUP | Caterpillar | View |
| 3T4308 | BEARING | Caterpillar | View |
| 4V4444 | 4V4444 | Caterpillar | View |
Specifications
engine
Engine Model - 3024
Net power - 46hp
Gross Power - 48 HP
Displacement - 134.3 ts per
ISO 9249 Rating - 46 HP
EEC 80/1269 Rating - 46h.p.
SAE J1349 Rating - 46h.p.
Operational
The capacity of the fuel tank is 19.6 gal
Hydraulic Capacity 17.5 Gallons
Static Tipping Weight - 6,702.1 lbs.
Transmission
The number of forward gears - 2
Number of reverse gears - 2
Top Speed - Forward - 12.5 mph
Max. Speed - Reverse - 12.5 mph
Weights
Operating Weight - 9435 pounds
Buckets
Bucket Width - 5.1 Feet in
Hydraulic system
Lifting Time - 4.5sec
Dump time - 1.5 sec.
Shorter time - 3.2 s
Hydraulic Cycle Time - Dump - 1.5
Hydraulic Cycle Time - Lift - 4.5
Primary ReliefV3400 psi
Hydraulic cycle time - lower, float - 3.2
3rd valve flow rate - 12.4 gallons / min
Flow pressure at 2600 rpm and 70 bar (1000 psi) - 15.9 gallons per minute
Bucket
Breakout Power - 8190 pounds
Dump clearance at maximum lift - 7.7 feet per
Bucket Width - 5.9 Feet in
Bucket Capacity - Bulk - 0,7yd3
Service replenishment options
Cooling system - 3.7gal
Fuel tank - 19.6 gal
Hydraulic system - 17.5 gal
Engine oil - 2.1gal
Taxi
ROPS - Meets the following criteria: SAE J1040 MAY94, ISO 3471-1: 1986
FOPS - Meets the following criteria: SAE J231 JAN81, ISO 3449: 1992
Sound - sound level below 75 dB (A)
Maximum material density
General Purpose Bucket - 0.6 m3 (0.8 yards3) - 3500 lbs / yard
Multipurpose bucket - 0.6 m3 (0.8 cubic feet) - 3200 pounds / sq.
Lightweight material - bucket 1.0 m3 (1.3 yards3) - 2100 lbs / yard
High Dump Bucket - 0.7 m3 (0.8 yards3) - 3400 lbs / yard
Stone Screen Bucket - 0.6 m3 (0.8 yards) - 3450 lbs / yard
Motor dimensions
Hole Diameter - 3.3 Inches
Stroke - 3.9in
Powertrain, axles and brakes
Transmission type - two-stage hydrostatic single-pass transmission with a closed loop.
Maximum speeds - with tires 12.5-18, forward and backward, low - 4 mph
Top speed - forward and reverse, high - 12 miles per hour
Axle and final drives - fixed front axle with limited slip differential and planetary gear
Service and parking brake - combined into one, dry brake drive brake
Brake Standards - The brake complies with ISO 3450: 1996