Caterpillar WHEEL DOZERS 854K - catalog of spare parts

RELIABLE STRUCTURES

Your bottom line is enhanced by very durable structures that achieve multiple life cycles and withstand the toughest loading conditions.

Rear frame full box section resists torsional shocks and twisting.

Castings in the end frame of the engine are used in high voltage areas to distribute high loads.

Attachment areas for cast axles distribute the load better to improve the integrity of the structure

90 percent of the machine design is robotic welding to ensure high consistency of welds and increased strength.

FRAMES

Your key to maximum uptime and productivity is our front and rear frame.

Full box frames absorb twisting forces during dosing, maintaining alignment for hitch pins and drive lines.

The design of the coupling device has double tapered roller bearings and hardened pins that withstand both horizontal and vertical loads.

Increase strength at key points through the use of monolithic castings.

LOCATION Dozer hand beam and hand lever

To ensure long service life and reliability, solid one-piece pushing beams are wide in width and not just attached to the side of the frame. In the angular drowsiness, stresses are transmitted and absorbed through most of the frame.

 

IMPELLER (ICTC) Clutch Torque Converter And RIMPULL (RCS) CONTROL SYSTEM

Reduce your cost per ton using advanced ICTC and RCS for modulated thrust.

Reduce slippage and tire wear by modulating the thrust from 100 to 25 percent while simultaneously depressing the left pedal. After reaching 25% of the traction effort, the left pedal engages the brake.

Reduce the likelihood of wheel slippage without reducing hydraulic efficiency with RCS.

Improved fuel efficiency in certain applications thanks to our lock-up clutch torque converter for direct drive.

INTEGRATED TRANSMISSION MANAGEMENT AND CONTROL SYSTEM (STIC ™)

Experience maximum responsiveness and control with STIC, which combines the choice of direction, gear selection and steering in one lever.

A simple side-to-side movement turns the machine right or left, minimizing operator movement.

Easy to manage finger gear selection.

Smoother, faster cycles and less operator fatigue through the use of built-in controls with minimal effort.

WHEEL PLANETARY TRANSMISSION

Creating your success starts with a best-in-class powertrain designed specifically for mining.

Sequential smooth switching and efficiency thanks to integrated electronic controls.

Long service life and reliability due to heat treatment of equipment and metallurgy.

Three speeds forward and three backwards to fit your application.

CAT C32 ACERT ENGINE

Durability and efficiency at the heart of your 854K is provided by the Cat C32 engine with ACERT technology. Optimum performance is achieved through the use of a 12-cylinder four-stroke design.

Performance on request through the use of turbochargers and after-coolers.

High torque boost - a 33% increase in torque provides high pulling power when dispensing.

The increased engine service life due to decrease in nominal turns.

Fast engine response through electronic engine management.

EPA Tier 4 USA. The final rating is available for regions with a high level of regulation.

ELECTRO-HYDRAULIC CONTROL

Operators increase productivity with our responsive guns feature.

Work comfortably through the electronically controlled stops of the hydraulic cylinder.

Handle easy-to-use soft locks.

EASY RESPONSE

Increase operator efficiency by matching blade speed with your application.

Three different speeds: standard, accurate and fast.

Easy to configure via advisor display.

Affects only the function of raising and lowering the blade.

STEERING SYSTEM

Sure loader operation starts with precise machine control, provided by the load-sensitive 854K hydraulic steering system.

Increase efficiency with our variable displacement piston pumps.

Achieve precise positioning for easy loading in hard-to-reach places with 43 degrees of steering joint.

Enhance operator comfort with integrated steering and transmission functions.

FILTRATION SYSTEM

Take advantage of the increased performance and reliability of your hydraulic system with our state-of-the-art filtration system.

Drain filter in the lift / tilt housing.

Raise / tilt high pressure screens.

Filter stock steering.

High pressure steering screens.

Hydraulic body filter drain.

Front pump drive lubrication filter.

Front and rear brake oil screens.

STATION OPERATOR

Your operators can work more efficiently and feel comfortable with our cab features that are tailored to customer requirements.

ENTRANCE AND EXIT

Easily and safely enter and exit the cab thanks to new ergonomic features.

Two side access points.

Fold STIC steering / armrest.

Reduced access angle to the stairs.

CAT COMFORT SERIES III SEAT

Increase comfort and reduce operator fatigue with the Cat Comfort Series III seat.

High backrest design and very thick contour pads.

Air suspension system.

Easily accessible seat levers and controls for adjustment in six directions.

Installed on the seat module of the unit and the steering mechanism STIC, which moves with the seat.

Retractable seat belt width 76 mm (3 inches).

COACH SEAT

Safe training for other operators in comfort with our standard training chair.

Retractable seat belt width 76 mm (3 inches).

Folding design with molded tray for drinks and storage.

TECHNOLOGICAL SOLUTIONS

The 854K electronic systems are fully integrated to function as one machine. This integration creates a smart machine and a more informed operator, maximizing the performance of both.

VIMS ™ 3G

We make every effort to help our customers and operators work best with our Vital Information Management System (VIMS 3G).

Easy to view adviser The display has a large screen.

Intuitive controls and easy navigation with our advanced user interface.

Reduce maintenance time by informing operators of the malfunction or operation of the machine system.

OPERATOR PROFILE

Operator comfort begins with individual settings for machine functions. Through our advisory display, the operator can instantly recall personalized profiles.

Store up to 10 separate operator profiles via advisor.

Reduce setup time between operators by invoking custom screen layouts.

CAT MINESTAR SYSTEM

The Cat MineStar System is the industry`s largest set of integrated mine management and mobile equipment technologies that can be customized to suit your work needs. Its feature sets — Fleet, Terrain, Detect, Health, and Command — contain a range of technologies that allow you to manage everything from fleet assignment and status monitoring to remote and autonomous control. 854K can use many of these advanced technologies, some of which are standard in the factory.

FLEET

Fleet provides comprehensive machine tracking, assignment and performance management in real time, giving you a complete overview of all operations from anywhere in the world.

TRAINERS FOR LOADING

The terrain with your 854K provides highly accurate loading management using navigation technology. This improves 854K performance and provides real-time feedback for increased efficiency.

DETECTION

Detection helps to increase operator awareness, increasing safety at your work. It includes a number of features designed to assist the operator in areas with limited visibility around fixed and mobile equipment.

HEALTH

Health provides critical vehicle status and operational data for your entire fleet. It includes comprehensive capabilities for monitoring the status of equipment and assets with a wide range of diagnostic, analytical and reporting tools.

SECURITY

We are constantly improving our products to provide a safe working environment for the operator and those who work in your workplace.

ACCESS MACHINE

Wider staircases with reduced corners provide a safe means for operators who can enter and exit 854K.

Aisles with non-skid surfaces and built-in blocking / marking points are designed for service areas.

Windshield cleaning platforms provide safe and convenient access for the operator.

Continually maintain three points of contact across service areas at ground level or platform.

Emergency exit.

TRANSPARENCY

Optional folding curtains and heated mirrors provide improved visibility for safe operation.

The Cat Detection feature with object detection system (rear view camera and radar) or the Vision option (rear view camera) increases operator awareness around the machine.

Standard HID lamps provide excellent visibility of the work area.

The cab has LED signal beacons.

OPERATOR ENVIRONMENT

Low vibrations for the operator due to the viscous cab supports and air suspension of the seat.

Low noise level in the cabin.

An operator training point facilitates safe training for a new operator.

Standard 76 mm (3 in.) Seat belts on the operator’s seat and on the seat for operator training.

POWER ACCESS SYSTEM

The Cat-powered access system provides easier access to the main staircase, improving entry and exit to the rear platform and back.

Safe, ergonomic access system.

All operators have enough space when using the wide ladder.

Operators maintain three-point contact with full handrails on each side.

Raise the lower platform from the level of the cabin or from the ground.

Occupants can quickly fail with a conveniently located emergency drain valve if the loader fails.

WE CAN HELP YOU TO ESCAPE YOU 854K HAS THE FEATURES OF THE DESIGN TO REDUCE YOUR TIME.

Extended service intervals for fluids and filters.

Safe and convenient service with terrestrial or platform access and grouped service points.

Swing doors on both sides of the engine compartment provide easy access to important daily maintenance checks.

Ecology drains for ease of maintenance and to prevent spills of potential environmental pollutants.

Centralized cranes with remote control.

Reduce downtime with VIMS system notifications so your operators and technicians can solve any problems before a crash.

SUPPORT

SUPPORTING LEGENDARY CAT

Dear partner, your Cat dealer is always at your service.

Preventive maintenance programs and guaranteed service contracts.

Best-in-class parts availability.

Increase your effectiveness with operator training.

Original repaired Cat parts.

SUSTAINABLE PROFIT

The 854K model is designed for maximum efficiency and productivity while conserving natural resources.

Turning the engine off at idle can help you save fuel by avoiding unnecessary idling.

Reduce environmental waste with our maintenance-free batteries or advanced maintenance.

Cat 854K, created for several lives, is one of the most converted products. To help extend the life of the machine, Caterpillar offers a range of sustainable options, such as our Reman and Certified Rebuild programs. In these programs, reusable or remanufactured components can provide cost savings of 40–70 percent, which reduces operating costs and benefits the environment.

Caterpillar offers retrofit packages that allow you to use new features on older machines and maximize your resources. And when you complete the Cat Certified Rebuild program, these upgrade kits are part of the recovery process.

DEPENDABLE BLADES

Maximize your productivity with a suitable blade for your dispenser.

High strength, extruded rib design.

Cat large tracked tractor on cutting edges and lower wear plates.

Optimized width and capacity for superior metering and rolling characteristics.

COAL BLADE

Increase your productivity with the Cat Cat Blade, designed to maintain load control, and high capacity for lighter materials.

SEMI-U BLADE

Shows the characteristics of the S and U blades in the same housing for increased productivity, while maintaining the excellent distribution characteristics of the straight blade.

HEAVY SEX

For unsurpassed durability in high wear applications, Semi-U blade:

Hardox 400 Liner and side panels

 

Additional reinforcement at the bottom of the blade

ENGINE

WEIGHTS

TRANSMISSION

HYDRAULIC SYSTEM - LIFT/TILT

SERVICE REFILL CAPACITIES

AXLES

BRAKES

BLADES

CAB

STEERING

MODEL 854K (TIER 4)

MODEL 854K (TIER 2)

DIMENSIONS (APPROXIMATE)