6Y3484	BEARING	Caterpillar	View
3P2983	SUN GEAR	Caterpillar	View
6Y4280	CONE-BEARING	Caterpillar	View
5P3867	RACE	Caterpillar	View
3P3060	SUN GEAR	Caterpillar	View
2P8353	2P8353	Caterpillar	View
4V1901	4V1901	Caterpillar	View
2S0679	BEARING A	Caterpillar	View
7W0205	CORE G	Caterpillar	View
3P3096	3P3096	Caterpillar	View
3P3059	GEAR	Caterpillar	View
8T2275	8T2275	Caterpillar	View
8S9076	CUP	Caterpillar	View
8S9075	CONE	Caterpillar	View
1P1367	PLUNGER	Caterpillar	View
5P7807	BEARING	Caterpillar	View
4P7371	BUTTON	Caterpillar	View
4W5998	PUSH RODS	Caterpillar	View
1W7239	SHAFT A	Caterpillar	View
1W7238	SHAFT A	Caterpillar	View
7T9755	CUP-BEARING	Caterpillar	View

Specifications

engine

The number of cylinders - 6

Engine make - 2236

Engine Model - 3176C ATAAC

Net power - 339.3 hp

The measured power @ - 2000 rpm

Displacement - 891

Hole Diameter - 5.4 inches

Stroke - 6.5 inches

Net Power - ISO 9249 - 339 HP

Engine Model - Cat 3406E ATAAC Diesel

Flywheel power - 339 hp

Net Power - EEC 80/1269 - 339 HP

Net power - DIN 70020 - 327 hp

Net Power - SAE J1349 (JAN90) - 339 HP

Operational

Working WeightV63325.6lb

166.5 gallon fuel tank capacity

Tire size - 29.5-5 16PR

Transmission

The number of forward gears - 4

Number of reverse gears - 4

Top Speed - Forward - 20.6 mph

Max. Speed - Reverse - 22.8 mph

Forward - 1 - 3.8 mph

Forward - 2 - 6.5 miles per hour

Forward - 3 - 11.4 mph

Forward - 4 - 20 miles per hour

Reverse - 1 - 4.3 mph

Reverse - 2 - 7.5 miles per hour

Reverse - 3 - 13 mph

Reverse - 4 - 22.7 mph

Number of speeds forward - 4

Number of reverse speeds - 4

Steering - Steering Angle

Steering - fully hydraulic, power steering

Turning radius - with a straight blade - 24 feet per

Weights

Operating Weight - 63,325 lbs

Tires

Standard tire size - 29.5-25 L-3

Tires - 10 options in addition to the standard offer.

Hydraulic system

Safety Valve Installation - 3,500 psi

Performance of the vane pump at 2000 rpm and 6900 kPa (1000 psi) - 24.5 gal / min

Lifting Cylinder, Hole and Stroke - 120.65 mm x 915 mm 4.75 inches x 36 inches

Steering cylinder, bore and stroke - 114.3 mm x 576 mm 4.5 inches x 22.7 inches

Right tilt and tip, hole and stroke - 152.4 mm x 255 mm 6 in x 10 in

Left tilt and tip, hole and stroke - 133.35 mm x 255 mm 5.25 inches x 10 inches

Blade

Blade Capacity - 6.7yd3

Blade Width - 14.8 Feet in

Blade Height - 4.1 Feet

Axes

Front - planetary fixed

Rear - 13 degrees planetary swing

The brakes

Brakes - comply with OSHA, SAE J1473 DEC84, ISO 2450-1985 standards.

Dimensions

Length with blade on the ground - 27.2 feet in

Tire Width - 14.8 Feet in

Height to Cab Top - 12.14 ft in

Wheelbase - 12.14 feet in

Ground clearance - 1.3 feet in

Service replenishment options

Cooling system - 21.9 gal

Carter - 9gal

23.2 gallon hydraulic tank

Fuel Tank - Standard - 166.5 Gallons

Gearbox - 16.4gal

Differential - Last gear - Front - 23.8gal

Differential - Last gear - Rear - 23.8gal

Taxi

ROPS / FOPS - Meets SAE and ISO standards.

Sound performance

Standards - Complies with ANSI / SAE and ISO.

Blade characteristics

Straight Blade - Capacity - 6.2yd3

Blade volume - 4.67 m3 6.11 m3

Moldboard - Length - 13.8 Feet in

Blade angle - total - 22.4 degrees

Blade angle - forward - 11.2 degrees

Blade angle - back - 11.2 degrees

Blade angle - to the right - 15.2 degrees

Blade angle - left - 15.2 degrees

Maximum Rise Above Ground - 3.5 Feet

Straight Blade - Full Width - 14.8 Feet

Straight Blade - Height - 48.4 Feet

Straight Blade - Digging Depth - 17 ft.

Straight Blade - Ground clearance - 37.6 feet in

Straight Blade - Maximum Tilt - 46.7 Feet