Caterpillar WHEEL DOZERS 814F - catalog of spare parts
Dimensions
Length with blade on the ground - 22.6 feet in
Tire Width - 9.2 Feet in
Cab Height - 11 ft.
Wheelbase - 11 ft. In
Ground clearance - 1.2 feet in
Wheelbase - 11 ft. In
Height - Top of the exhaust pipe - 130.1 inches
Centerline of rear axle to hitch - 66 inches
Height - Top of Hood - 93.5 inches
Height - Lower Stairs - 1.5 Feet in
Height - Cab Top - 11 ft.
Length - with blade on the ground - 22.6 feet in
The center line from the rear axle to the edge of the bumper is 6.2 feet in
Ground clearance - Bumper - 2.5 feet in
Operational characteristics
Ground clearance - 1.47 feet in
Choose WHEEL DOZERS 814F section:
5P7807 | BEARING | Caterpillar | View |
2P8987 | CONE BEARING | Caterpillar | View |
2P8986 | CUP | Caterpillar | View |
2P1170 | SHAFT A | Caterpillar | View |
8S0493 | SHAFT | Caterpillar | View |
5S5918 | PUSH ROD | Caterpillar | View |
8P1918 | GEAR | Caterpillar | View |
5P5411 | RACE | Caterpillar | View |
5P4992 | BEARING | Caterpillar | View |
5P3723 | 5P3723 | Caterpillar | View |
5P2526 | CUP | Caterpillar | View |
6V4351 | PLATE | Caterpillar | View |
6V4350 | RACE | Caterpillar | View |
6S7827 | BALL | Caterpillar | View |
6Y2547 | CUP | Caterpillar | View |
6Y2546 | 6Y2546 | Caterpillar | View |
8P1916 | GEAR | Caterpillar | View |
7T9370 | GEAR-SUN | Caterpillar | View |
7T8816 | 7T8816 | Caterpillar | View |
8S0490 | 8S0490 | Caterpillar | View |
1P1367 | PLUNGER | Caterpillar | View |
4W1204 | CONE | Caterpillar | View |
4W1203 | CUP | Caterpillar | View |
8P1919 | GEAR | Caterpillar | View |
5P5045 | BEARING | Caterpillar | View |
8T2275 | 8T2275 | Caterpillar | View |
8R8795 | 8R8795 | Caterpillar | View |
7P8371 | BEARING | Caterpillar | View |
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - 3176C ATAAC
Gross Power - 254 HP
Net power - 240hp
Measured Power @ - 2100rpm
Torque boost - 45%
Displacement - 628.6
Hole - 5 inches
Stroke - 5.6 inches
Net Power - ISO 9249 - 240 HP
Engine Model - Cat 3176C ATAAC
Flywheel power - 240hp
Net Power - EEC 80/1269 - 240 HP
Net power - SAE J1349 (JAN90) - 240 hp
Operational
Working Weight - 47,869 lbs.
117.9 gallon fuel tank capacity
Cooling system capacity - 14.6gal
Engine oil volume - 9 gal
Transmission Fluid Capacity 13.3 Gallons
The volume of the hydraulic system is 23.3 gallons
Front Diff Fluid Capacity 17.2 Gallons
17.2 gallon rear fluid
Rotation angle - 30 degrees
Axis Swing - 12 degrees
Operating voltage - 24 V
Generator current strength - 70 amperes
Tire size - 23.5-25 12PR
Transmission
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 19.3 mph
Max. Speed - Reverse - 21.9 mph
Forward - 1 - 3.6 mph
Forward - 2 - 6.3 miles per hour
Forward - 3 - 10.9 miles per hour
Forward - 4 - 19.2 mph
Reverse - 1 - 4.1 mph
Reverse - 2 - 7.1 mph
Reverse - 3 - 12.5 mph
Reverse - 4 - 21.8 mph
Steering - Steering Angle
Turning radius - with a straight blade - 15.6 feet per
Weights
Operating Weight - 47,877 pounds
Tires
Standard tire size - 23.5-25.12PR
Tires - 4 Options Available
Hydraulic system
Pressure Relief Valve Installation - 2255 psi
Lifting Cylinder, Hole and Stroke - 120.65 mm x 913.9 mm 4.74 inches x 35.98 inches
Steering Cylinder, Bore, and Stroke - 101.6 mm x 597 mm 3.99 inches x 23.5 inches
Blade
Blade Capacity - 3.5yd3
Blade Width - 11.8 Feet in
Blade Height - 3.7 Feet
Axes
Front - Fixed
Rear - oscillating 12 degrees
The maximum rise and fall of one wheel - 18.4 inches
the brakes
Brakes - OSHA Compliant
Dimensions
Length with blade on the ground - 22.58 feet in
Tire Width - 9.19 ft in
Height to Cab Top - 10.92 Feet in
Wheelbase - 11 ft. In
Ground clearance - 1.2 feet in
Operational characteristics
Ground clearance - 1.5 feet in
Service replenishment options
Cooling system - 14.5 gal
Carter - 9gal
23.2 gallon hydraulic tank
Fuel tank - standard - 117.8 gal
Gearbox - 13.2gal
Differential - Last gear - front - 17.1 gal
Differential - Last gear - Rear - 17.1gal
Taxi
ROPS / FOPS - Meets SAE and ISO Standards
Sound performance
Standards - Meet Required Standards
Blade characteristics
Straight Blade - Capacity - 3.5yd3
Blade volume - 2.66 m3, 3.49 m3
Moldboard - Length - 11.8 Feet
Blade angle - total - 51.9 degrees
Blade angle - forward - 10 degrees
Blade angle - back - 4.5 degrees
Blade angle - to the right - 4.5 degrees
Blade angle - left - 8 degrees
Maximum Lifting Height Above Ground - 2.4 Feet
Straight Blade - Full Width - 11.8 Feet
Straight Blade - Height - 3.6 ft.
Straight Blade - Digging Depth - 1.8 Feet
Straight Blade - Ground Clearance - 2.4 ft.
Straight Blade - Maximum Tilt - 2.6 feet in