Caterpillar WHEEL DOZER 834G - catalog of spare parts
Dimensions
Length with blade on the ground - 34.2 feet in
Tire Width - 11.4 Feet
Height to Cab Top - 13.5 Feet in
Wheelbase - 15 ft. In
Ground clearance - 1.8 feet in
Wheelbase - 15 ft. In
Height - Cab Top - 13.5 feet in
Length - with blade on the ground - 32.5 feet in
Operational characteristics
Ground clearance - 1.78 feet in
Taxi
ROPS / FOPS - Meets SAE and ISO standards.
Cab - ROPS / FOPS is standard.
Sound Levels - Meets ANSI / SAE, SAE, and ISO standards.
Choose WHEEL DOZER 834G section:
Specifications
engine
The number of cylinders - 6
Engine make - 2236
Engine Model - 3456 DITA
Net power - 480.1 hp
Measured Power @ - 1900rpm
Displacement - 964.2
Hole - 5.5 inches
6.8 inch travel
Engine Model - Cat 3456 Diesel
Flywheel power - 481 hp
Direct Drive Net Power - Caterpillar - 451 HP
Net direct drive power - ISO 9249 - 451 hp
Net direct drive power - EEC 80/1269 - 451 hp
Net direct drive power - SAE J1349 (JAN90) - 446 hp
Transmitter Drive Net Power - Caterpillar - 481 HP
Net drive power of the converter - EEC 80/1269 - 481 hp
Converter net power - ISO 9249 - 481 hp
The net power of the converter - SAE J1349 (JAN90) - 477 hp
Operational
Operating Weight - 103,851 lbs.
212.2 gallon fuel tank capacity
Tire size - 35/65-R33 24PR
Transmission
The number of forward gears - 4
Number of reverse gears - 3
Top Speed - Forward - 22.3 mph
Max. Speed - Reverse - 13.5 mph
Forward - 1 - 4.3 mph
Forward - 2 - 7.8 mph
Forward - 3 - 13.8 mph
Forward - 4 - 24 miles per hour
Reverse - 1 - 4.5 mph
Reverse - 2 - 8.1 mph
Direct Drive - Forward 3 - 13.6 mph
Direct Drive - Reverse 3 - 14.3 mph
Direct Drive - Forward 4 - 24.1 mph
Direct Drive - Forward 2 - 7.7 mph
Direct Drive - Reverse 2 - 8 Mph
Drive Converter - Forward 3 - 12.8 mph
Drive Converter - Reverse 3 - 13.4 mph
Direct Drive - Forward 1 - Lock Disabled Forward 1
Drive Converter - Forward 4 - 22.3 mph
Drive Converter - Forward 1 - 4.2mph
Drive Converter - Forward 2 - 7.3 mph
Direct Drive - Reverse 1 - 4.5 mph
Drive Converter - Reverse 1 - 4.4 mph
Drive Converter - Reverse 2 - 7.7 mph
Reverse - 3 - 14.3 mph
Number of speeds forward - 4
Number of reverse speeds - 3
Steering
Steering - Conforms to SAE J1511 FEB94 / ISO 5010: 1992 stds.
Turn Radius - With Straight Blade - 29.2 ft.
Weights
Working Weight - 103,849 lbs.
Tires
Standard tire size - 35 / 65-33
Tires - Four options with others on request.
Hydraulic system
Pressure Relief Valve Installation - 4206 psi
Lifting Cylinder, Bore, and Stroke - 139.75 mm x 1021 mm 5.5 inches x 40.2 inches
Steering cylinder, bore and stroke - 114.3 mm x 740 mm 4.5 inches x 29.1 inches
Right tilt and tip, hole and stroke - 152.4 mm x 276 mm 6 inches x 10.9 inches
Tilt and tip on the left, hole and stroke - 139.75 x 276 mm 5.5 x 10.9 inches
Gear pump performance at 1,900 rpm and 24,000 kPa (3,480 psi) - 49.7 gallons per minute
Blade
Blade Capacity - 10.6yd3
Blade Width - 16.7 Feet in
Blade Height - 4.9 Feet in
Maximum rise and fall on one wheel - 17.6 inches
Dimensions
Length with blade on the ground - 34.19 feet in
Tire Width - 11.39 Feet in
Height to Cab Top - 13.42 Feet in
Wheelbase - 14.93 feet in
Ground clearance - 1.78 feet in
Operational characteristics
Ground clearance - 1.8 feet in
Service replenishment options
Cooling system - 25gal
Crankcase Protection - 15.9 gal
Hydraulic tank - 37gal
Fuel tank - standard - 210 gal
Gearbox - 19gal
Differential - Last gear - front - 49.1 gal
Differential - Last gear - Rear - 49.1gal