Caterpillar WHEEL DOZER 824H - catalog of spare parts
Dimensions
Length with blade on the ground - 27 feet in
Height to Cab Top - 12.2 Feet in
Wheelbase - 12.2 feet in
Ground clearance - 1.2 feet in
Wheelbase - 12.2 feet in
Height - Top of the exhaust pipe - 141.4 inches
Centerline of rear axle to hitch - 72.9 inches
Height - Top Hood - 103.7 Inches
Height - Lower Stairs - 1.5 Feet in
Height - Cab Top - 12.2 Feet in
Length - with blade on the ground - 27 feet in
The center line from the rear axle to the edge of the bumper is 8.9 feet in
Ground clearance - Bumper - 2.9 feet in
Operational characteristics
Ground clearance - 1.18 feet in
Choose WHEEL DOZER 824H section:
Specifications
engine
Cylinders - 6
Engine make - 2236
Engine Model - C15 ACERT
Gross Power - 401 HP
Net power - 354 hp
Measured Power @ - 1800rpm
Displacement - 928
Hole Diameter - 5.4 inches
Stroke - 6.7 inches
Engine Model - Cat C15 ACERT
Flywheel power - 354 hp
Net power - SAE J1349 (JAN90) - 350.1 hp
Net Power Direct Drive - Caterpillar - 354 HP
Direct drive net power - ISO 9249 - 354 hp
Direct Drive Net Power - EEC 80/1269 - 354 HP
Net direct drive power - SAE J1349 (JAN90) - 350 hp
Net Power Converter - Caterpillar - 354 HP
The net drive power of the converter - EEC 80/1269 - 354 hp
Converter net power - ISO 9249 - 354 HP
The net power of the converter - SAE J1349 (JAN90) - 350 hp
Operational
Operating Weight - 63,325 lbs
Fuel tank capacity - 185gal
Cooling system capacity - 21.9 gal
Engine oil volume - 9 gal
Transmission fluid capacity - 16.4 gal
Hydraulic Capacity 23.2 Gallons
Front Diff Fluid Capacity - 23.8 Gallons
23.8 gallon rear fluid
Axis Fluctuation - 13 degrees
Tire size - 29.5-25 L-3
Transmission
The number of forward gears - 4
Number of reverse gears - 4
Top Speed - Forward - 20 Mph
Max. Speed - Reverse - 22.7 mph
Drive Converter - Forward 3 - 11.5 mph
Drive Converter - Reverse 3 - 13 mph
Drive Converter - Forward 4 - 20 mph
Drive Converter - Forward 1 - 3.8 mph
Drive Converter - Forward 2 - 6.5 mph
Drive Converter - Reverse 1 - 4.3 Mph
Drive Converter - Reverse 2 - 7.5 mph
Drive Converter - Reverse 4 - 22.7 mph
Number of speeds forward - 4
Number of reverse speeds - 4
Weights
Operating Weight - 63,325 lbs
Tires
Standard tire size - 29.5RR25 XHA MX L3
Hydraulic system
Safety Valve Installation - 3,500 psi
Lifting Cylinder, Bore, and Stroke - 120.65 mm x 915 mm (4.75 inches x 36.0 inches)
Steering Cylinder, Bore, and Travel - 114.3 mm x 576 mm (4.5 inches x 22.7 inches)
Right tilt and tip, hole and stroke - 152.4 mm x 255 mm (6 inches x 10.0 inches)
Left tilt and tip, hole and stroke - 133.75 mm x 255 mm (5.3 inches x 10.0 inches)
Blade
Blade Capacity - 6.2yd3
Blade Width - 14.8 Feet in
Blade Height - 4.1 Feet
Rear - 13 degree wobble
The brakes
Brakes - Meet SAE / ISO 3450 1996
Dimensions
Length with blade on the ground - 26.98 feet in
Height to Cab Top - 12.14 ft in
Wheelbase - 12.14 feet in
Ground clearance - 1.17 feet in
Operational characteristics
Ground clearance - 1.2 feet in
Service replenishment options
Cooling system - 21.9 gal
Carter - 9gal
23.2 gallon hydraulic tank
Fuel tank - standard - 185gal
Gearbox - 16.4gal
Differential - Last gear - Front - 23.8gal
Differential - Last gear - Rear - 23.8gal
Taxi
ROPS / FOPS - Meets SAE and ISO Standards
Cabin - ROPS / FOPS standard
Sound Levels - Complies with ANSI / SAE, SAE and ISO Standards
Blade characteristics
Straight Blade - Capacity - 14.8yd3
Blade capacity - 4.67 m3 - 16 m3 (6.1 m3 - 21 m 3)
Straight Blade - Full Width - 1.4 Feet
Straight Blade - Height - 4.1 Feet
Straight Blade - Digging Depth - 1.4 Feet
Straight Blade - Ground Clearance - 3.6 ft.
Straight Blade - Maximum Tilt - 3.9 Feet
Straight Blade - Weight - 7047 pounds
Straight Blade - Total Operating Weight - 63,325 lbs
Universal Blade - Capacity - 9yd3
Charcoal Blade - Capacity - 21yd3
Universal Blade - Full Width - 14.3 Feet
Universal Blade - Height - 4.5 Feet
Universal Blade - Digging Depth - 1.7 Feet
Universal Blade - Ground Clearance - 3.2 Feet
Universal Blade - Maximum Tilt - 3.8 Feet
Coal Blade - Total Width - 15.8 Feet
Coal Blade - Height - 6 Feet in
Coal Blade - Digging Depth - 1.8 Feet
Coal Blade - Ground Clearance - 3.5 Feet
Coal Blade - Maximum Tilt - 4.2 Feet
Semi-U Blade - Capacity - 9yd3
Semi-U Blade - 5.2 feet high
Semi-U Blade - Digging Depth - 1.8 Feet
Semi U-Blade - Full Width - 14.6 Feet
Semi U-blade - maximum tilt - 3.9 feet in