Caterpillar WHEEL DOZER 814F II - catalog of spare parts
Dimensions
Ground clearance - 1.2 feet in
Wheelbase - 11 ft. In
Height - Top of the exhaust pipe - 130.1 inches
Centerline of rear axle to hitch - 66 inches
Height - Top of Hood - 93.5 inches
Height - Lower Stairs - 1.5 Feet in
Height - Cab Top - 11 ft.
Length - with blade on the ground - 22.6 feet in
The center line from the rear axle to the edge of the bumper is 6.2 feet in
Ground clearance - Bumper - 2.5 feet in
Choose WHEEL DOZER 814F II section:
Specifications
engine
Cylinders - 6
Gross Power - 253 HP
Net power - 232 hp
30% increase in torque
Displacement - 537cu in
Boredom - 4.4 inches
Stroke - 5.9 inches
Net Power - ISO 9249 - 235 HP
Engine Model - Cat C9 ACERT
Flywheel power - 232 hp
Net Power - EEC 80/1269 - 235 HP
Net power - SAE J1349 (JAN90) - 232 hp
Transmission
Forward - 1 - 3.6 mph
Forward - 2 - 6.4 miles per hour
Forward - 3 - 11.2 mph
Forward - 4 - 19.3 mph
Reverse - 1 - 4.1 mph
Reverse - 2 - 7.3mph
Reverse - 3 - 12.7 mph
Reverse - 4 - 21.8 mph
Number of speeds forward - 4
Number of reverse speeds - 4
Steering - Steering Angle
Turn Radius - Outer Blade Angle - 23.5 ft.
Turn Radius - Inner Blade Angle - 12.2 ft.
Tires
Standard tire size - 26.5 R25 XHA MX L3
Tires - L3 Tread
Hydraulic system
Pressure Relief Valve Installation - 2255 psi
Lifting Cylinder, Hole and Stroke - 120.62 mm x 913.9 mm 4.74 inches x 35.98 inches
Steering Cylinder, Bore, and Stroke - 101.6 mm x 597 mm 3.99 inches x 23.5 inches
Axes
Front - Fixed
Rear - oscillating 12 degrees
The brakes
Brakes - OSHA Compliant
Operational characteristics
Ground clearance - 1.3 feet in
Turning circle - with blade - 4703.4 feet in
Service replenishment options
Cooling system - 14.5 gal
Carter - 9gal
23.2 gallon hydraulic tank
Fuel tank - standard - 117.8 gal
Gearbox - 13.2gal
Differential - Last gear - front - 17.1 gal
Differential - Last gear - Rear - 17.1gal
Taxi
ROPS / FOPS - Standard
Cabin - complies with SAE and ISO standards
Sound performance
Standards - Meet Required Standards
Blade characteristics
Straight Blade - Capacity - 3.5yd3
Blade capacity - .66 m3
Moldboard - Length - 11.8 Feet
Blade angle - total - 51.9 degrees
Blade angle - forward - 10 degrees
Blade angle - back - 4.5 degrees
Blade angle - to the right - 4.5 degrees
Blade angle - left - 8 degrees
Maximum Lifting Height Above Ground - 2.4 Feet
Straight Blade - Full Width - 11.8 Feet
Straight Blade - Height - 3.6 ft.
Straight Blade - Digging Depth - 1.8 Feet
Straight Blade - Maximum Tilt - 2.6 feet in
Straight Blade - Total Operating Weight - 47,869 pounds