Caterpillar SKID STEER LOADERS 262C2 - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Wheelbase - 4.1 feet in
Bucket Pin Height - Maximum Lifting Height - 10.7 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 117.3 Inches
Length - with bucket on the ground - 145.4 inches
Maximum total height - 160.4 inches
Bucket Finger Height - Carry Position - 7.8 inches
Clearance at maximum lift and unload - 96.4 inches
Departure angle - 26 degrees
Maximum angle of dumping - 50 degrees
Rear Upright Angle - Maximum Height - 85 degrees
Turning radius from the center - rear - 68.1 inches
Center Turn Radius - Coupling - 54.6 inches
Center Turn Radius - Bucket - 85.3 inches
Maximum reach - with weapons in parallel - 50.5 inches
Pin Bucket Lug - Maximum Rise - 14.7 Inches
Achieve - Maximum Rise / Drop - 30.7 inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 42.8 inches
Choose SKID STEER LOADERS 262C2 section:
Specifications
engine
Gross Power - 73 HP
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 74 HP
Engine Model - Cat C3.4 DIT
Net Power - SAE 1349 - 73 HP
Flywheel net power - 73 hp
Power train
Forward Speed - 7.7 mph
Reverse Speed - 7.7 mph
Speed reverse - 2-speed choice - 12 mph
Forward Speed - 2-Speed - 12 Mph
Weights
Working Weight - 7,968 pounds
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Performance characteristics
Nominal Working Capacity with Extra Counterweight - 2,945 lbs
5400 lb Tipping Load
Breakout Force - Tilt Cylinder - 7315 lbs
Nominal Working Capacity - 2,700 pounds
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 26gal
Hydraulic tank - 11 gal
Crankcase - 2.6gal
Hydraulic system - 15 gal
Chain Box - Each Side - 2.6gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II