Caterpillar SKID STEER LOADERS 262B - catalog of spare parts
Dimensions
Length with Bucket - 11.9 Feet in
Length without bucket - 9.6 feet in
Tire Width - 6.1 Feet in
Height to Cab Top - 6.8 Feet in
Ground clearance at Max Lift and Dump - 8 ft.
Wheelbase - 4.1 feet in
Ground clearance - 8 inches
Get to Max Lift and Dump - 32.7 inches
Turning radius from center - rear of car - 66.8 inches
Turn radius from center - incl. Bucket - 85.9 inches
Wheelbase - 4 feet per
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 7 ft.
Length - without bucket - 114 inches
Length - with bucket on the ground - 142 inches
Maximum total height - 160 inches
Bucket Finger Height - Carry Position - 8.4 inches
Clearance at maximum lift and unload - 95 inches
Rotate Radius From Center - Rear - 67in
Rotate Radius From Center - Coupler - 52in
Rotate Center Radius - Bucket - 86 Inches
Maximum reach - with parallel arms - 52 inches
Pin Bucket Lug - Maximum Lifting - 13.6 Inches
Achieve - maximum lift / drop - 33 inches
The width of the car over the tires - 72 inches
Bumper Lug - Rear Axle - 41 Inch
Choose SKID STEER LOADERS 262B section:
Specifications
engine
Engine make - 2236
Engine Model - 3044C DIT
Gross Power - 82 hp
Net power - 79.2 hp
Aspiration - Turbocharged
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 82 HP
Engine Model - Cat 3044C DIT
Engine power - ISO 14396 - 80 hp
Net Power - EEC 80/1269 - 78 HP
Net Power - ISO 9249 EEC - 78 HP
Net Power - SAE 1349 - 78 HP
Flywheel net power - 78 hp
Operational
Operating Weight - 7859.5 lbs
23.8 gallon fuel tank capacity
Cooling system capacity - 2.7 gal
2.7 gallon engine oil
Hydraulic system capacity - 14.1 gallons
The volume of fluid for the box - each side - 2.2gal
Top speed - 7.3 mph
Tire size - 12x16.5 10PR
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.2 miles per hour
Reverse Speed - 7.2 Mph
Speed reverse - 2-speed choice - 11 mph
Forward Speed - 2-Speed - 11 Mph
Weights
Working Weight - 7,861 lbs.
Loader
Tear strength - 5507.2
Nominal Workload - 2698.5 lbs
Tipping angle - 5399.2 degrees
Hydraulic system
Hydraulic flow (1) - standard flow
Hydraulic power - 42.8 hp
Loader Maximum Hydraulic Flow - 21.4 gallons / min
Loader Maximum Hydraulic Pressure - 3335.87 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic flow (2) - standard
Hydraulic
Pump productivity - 22 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Length with Bucket - 11.87 Feet in
Tire Width - 6.01 Feet in
Height to Cab Top - 6.77 Feet in
Wheelbase - 4.03 feet in
Ground clearance - 8 inches
Length without bucket - 9.53 feet in
Ground clearance in Max Lift and Dump - 7.95 feet in
Reach for Max Lift and Dump - 32.64 inches
Performance characteristics
Nominal Working Capacity with Extra Counterweight - 2,750 lbs
Tipping Load - 5613 lbs.
Breakout Force - Tilt Cylinder - 5508 lbs
Breakout Force - Lift Cylinder - 5,229.4 pounds
Nominal Working Capacity - 2,700 pounds
Service replenishment options
Cooling system - 2.6gal
Fuel Tank - 23.8 Gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.6gal
Hydraulic system - 14 gal
Chain Box - Each Side - 2.1gal
Taxi
ROPS - SAE J1040 MAY94 and ISO3471: 1994
FOPS - SAE J / ISO 3449 APR98 Level I and ISO3449: 1992 Level I
FOPS Level II - SAE J / ISO 3449 APR98 Level II and ISO 3449: 1992 Level II (optional)