Caterpillar SKID STEER LOADERS 242B3 - catalog of spare parts
Dimensions
Length with Bucket - 11.3 Feet in
Length without bucket - 9.1 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.7 Feet in
Ground clearance at Max Lift and Dump - 7.7 feet in
Wheelbase - 3.6 ft. In
Ground clearance - 7 inches
Get to Max Lift and Dump - 24.5 inches
Turning radius from center - rear of car - 61.3 inches
Turn radius from center - incl. Bucket - 82.4 inches
Wheelbase - 3.6 ft. In
Bucket Pin Height - Maximum Lifting Height - 10.1 Feet
Height - Cab Top - 6.6 Feet in
Length - Without Bucket - 108.7 Inches
Length - with bucket on the ground - 135.3 inches
Maximum total height - 154 inches
Bucket Finger Height - Carry Position - 9 Inches
Ground clearance at maximum lift and unload - 92 inches
Departure angle - 28 degrees
Maximum angle of dumping - 50 degrees
Rear Upright Angle - Maximum Height - 88 degrees
Rotate Radius From Center - Rear - 61in
Rotate Radius From Center - Coupler - 52in
Rotate Radius From Center - Bucket - 82 Inches
Maximum reach - with arms in parallel - 48 inches
Pin Bucket Lug - Maximum Lift - 10 Inches
Achieve - maximum lift / drop - 24 inches
Width of the car over tires - 66 inches
Bumper lip - rear axle - 39 inches
Choose SKID STEER LOADERS 242B3 section:
Specifications
engine
Engine make - 2236
Engine Model - C3.4DIT
Gross Power - 74 HP
Net power - 71 hp
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 74 HP
Engine Model - Cat 3.4 DIT
Net Power - ISO 9249 EEC - 71 HP
Net Power - SAE 1349 - 71 HP
Flywheel net power - 71 hp
Operational
Operating Weight - 7,008 pounds
The capacity of the fuel tank is 15.4 gal
Cooling system capacity - 2.7 gal
Engine oil volume - 2.4gal
Hydraulic Capacity 14.6 Gallons
The volume of fluid in the box - each side - 1.6gal
Working speed - 7.8 mph
Top Speed - 11.5 mph
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.7 mph
Reverse Speed - 7.7 mph
Speed reverse - 2-speed - 11.4 mph
Forward Speed - 2-Speed - 11.4 mph
Weights
Operating Weight - 7,008 pounds
Loader
The power of separation - 4507
Nominal Workload - 2,150 lbs
Tipping angle - 4300 degrees
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow (2) - High Flow
Hydraulic power - Estimated - 60.3 hp
Loader hydraulic flow (1) - 22 gal / min
Loader Hydraulic Flow (2) - 31 gallons / min
Hydraulic
Pump productivity - 22 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Length with Bucket - 11.28 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.63 ft.
Wheelbase - 3.59 feet in
Ground clearance - 7 inches
Length without Bucket - 9.06 Feet in
Ground clearance at Max Lift and Dump - 7.66 feet at
Get to Max Elevator and Dump - 24.49in
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 2,200 lbs
Tipping Load - 4,300 pounds
Breakout Force - Tilt Cylinder - 4507 lbs
Nominal Capacity 2150 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel tank - 15.3gal
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.4gal
Hydraulic system - 14.5 gal
Chain Box - Each Side - 1.6 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II