Caterpillar SKID STEER LOADERS 236B3 - catalog of spare parts
Dimensions
Length with Bucket - 11.6 Feet in
Length without bucket - 9.2 feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.9 Feet in
Ground clearance at Max Lift and Dump - 7.9 feet in
Wheelbase - 3.8 feet in
Ground clearance - 9.3 inches
Get to Max Lift and Dump - 21.3 inches
Turn radius from center - rear of car - 63.9 inches
Turn radius from center - incl. Bucket - 82.4 inches
Wheelbase - 3.8 feet in
Bucket Pin Height - Maximum Lifting Height - 10.2 Feet
Height - Cab Top - 6.9 Feet in
Length - Without Bucket - 110 Inches
Length - with bucket on the ground - 138 inches
Maximum total height - 156 inches
Bucket Finger Height - Carry Position - 8.4 inches
Ground clearance at maximum lift and unload - 94 inches
Departure angle - 28 degrees
Maximum angle of dumping - 40 degrees
A-pillar angle - maximum height - 83 degrees
Rotate Radius From Center - Rear - 64 Inches
Rotate Radius From Center - Coupler - 52in
Rotate Radius From Center - Bucket - 82 Inches
Maximum reach - with weapons in parallel - 53in
Achieve - Maximum Rise / Drop - 21 Inches
Width of the car over tires - 66 inches
Bumper Lug - Rear Axle - 41 Inch
Choose SKID STEER LOADERS 236B3 section:
Specifications
engine
Engine make - 2236
Engine Model - C3.4DIT
Gross Power - 74 HP
Net power - 71 hp
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 74 HP
Engine Model - Cat C3.4 DIT
Net Power - ISO 9249 EEC - 71 HP
Net Power - SAE 1349 - 71 HP
Flywheel net power - 71 hp
Operational
Operating Weight - 7,007 pounds
23.8 gallon fuel tank capacity
Cooling system capacity - 2.7 gal
Engine oil volume - 2.4gal
The volume of the hydraulic system - 13.8 g
Fluid volume for the box - each side - 1.9 gal
Working speed - 7.6 mph
Top Speed - 11.3 mph
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Power train
Forward Speed - 7.5 Mph
Reverse Speed - 7.5 mph
Speed reverse - 2-speed - 11.2 mph
Forward Speed - 2-Speed - 11.2 mph
Weights
Operating Weight - 7,007 pounds
Loader
The power of separation - 5484
Nominal Workload - 1950 Lbs
Tipping angle - 3900 degrees
Hydraulic system
Hydraulic power - 42.8 hp
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic flow - standard
Hydraulic
Pump productivity - 22 gal / min
Pressure relief valve - 3335 psi Inch
Dimensions
Length with Bucket - 11.54 Feet in
Tire Width - 5.5 Feet in
Height to Cab Top - 6.87 Feet in
Wheelbase - 3.73 feet in
Ground clearance - 9.31 inches
Length without Bucket - 9.19 ft in
Ground clearance in Max Lift and Dump - 7.87 feet in
Get to Max Lift and Dump - 21.3 inches
Operational characteristics
Nominal Working Capacity with Extra Counterweight - 2050 lbs
Tipping Load - 3,900 pounds
Breakout Force - Tilt Cylinder - 5484 lbs.
Nominal Working Capacity - 1950 Lbs
Service replenishment options
Cooling system - 2.6gal
Fuel Tank - 23.8 Gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.4gal
Hydraulic system - 13.7 gal
Chain Box - Each Side - 1.8gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II