Caterpillar SKID STEER LOADER 299D2 XHP - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 89.4 inches
Length - Track on the ground - 69.6 inches
Length - Without Bucket - 125.5 Inches
Length - with bucket on the ground - 154.7 inches
Maximum total height - 158.7 inches
Bucket Finger Height - Carry Position - 7.1 inches
Ground clearance at maximum lift and unload - 94.5 inches
Departure angle -33 degrees
The maximum angle of discharge is 54 degrees
A-pillar angle - maximum height - 81 degrees
Pin Bucket Lug - Maximum Hoist - 19.4 Inches
Achieve - maximum lift / drop - 33.6 inches
Vehicle Width (400 mm / 15.7 in tracks) - 76 inches
Rollback angle - 25 degrees
Turning radius from the center - behind the car - 74 inches
Center Turn Radius - Clutch - 58.1in
Center Turn Radius - Bucket (Rack) - 91.1 inches
Maximum reach - with arms parallel to the ground - 51.9 inches
Choose SKID STEER LOADER 299D2 XHP section:
Specifications
engine
Net power - 106hp
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Net Power - ISO 9249 - 107 HP
Gross Power - SAE J1995 - 110hp
Engine Model - Cat C3.8 DIT (Turbo)
Net Power - SAE 1349 - 106 HP
Peak Torque - 1,500 rpm - SAE J1995 - 276 lb-ft
Power train
Travel Speed - Forward or Reverse - One Speed - 5.2 mph
Travel Speed - Forward or Reverse - Two speeds - 8.4 mph
Weights
The note
Operating weight, performance and dimensions, designed for an operator weighing 75 kg (165 lbs), all fluids, two-speed, smooth motion system, enclosed cab with a glass door, side windows, air conditioning, air-operated seat, extended display, rear view camera, 1,000 CCA battery, double-sided self-leveling, 1981-mm (78-inch) dirt bucket, 400-mm (15.7-inch) tracks, three-flange front / rear casters, no additional counterweights and manual quick release connector (if not e indicated otherwise).
Hydraulic system
Hydraulic flow - XHP - maximum hydraulic flow of the loader * - 40 gal / min
Note - * When using Cat 400 Series Tools.
Standard Flow Mode - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - XHP - Maximum Loader Hydraulic Pressure - 4061 psi
Hydraulic flow - XHP - Hydraulic power (calculated) - 94 hp
Standard Flow Mode - Loader Hydraulic Flow - 23 gallons / min
Standard flow mode - Hydraulic power - Estimated - 44 hp
Performance characteristics
Rated Operational Power - 50% Tipping Load - 4725 lbs
Rated Operational Power - 35% Tipping Load - 3,308 lbs
Ground Contact Area - 2184in2
Ground Pressure - 5.3 psi
Nominal Working Capacity with Extra Counterweight - 4975 lbs
Tipping Load - 9,450 lbs.
Breakout Force - Tilt Cylinder - 7270 lbs
Breakout Force - Lift Cylinder - 6162 lbs.
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Diesel Exhaust Fluid (DEF) - 5 gallons
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.
Noise level
Inside the cab * - 83 dB (A)
External cab ** - 104 dB (A)
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
* Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cab closed and at 70% of the maximum speed of rotation of the engine cooling fan. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
** Indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.