Caterpillar SKID STEER LOADER 299D2 - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 89.4 inches
Length - Track on the ground - 69.6 inches
Length - Without Bucket - 125.5 Inches
Length - with bucket on the ground - 154.7 inches
Maximum total height - 158.7 inches
Bucket Finger Height - Carry Position - 7.1 inches
Ground clearance at maximum lift and unload - 94.5 inches
Departure angle - 33 degrees
The maximum angle of discharge is 54 degrees
A-pillar angle - maximum height - 81 degrees
Pin Bucket Lug - Maximum Hoist - 19.4 Inches
Achieve - maximum lift / drop - 33.6 inches
Vehicle Width (400 mm / 15.7 in tracks) - 76 inches
Vehicle Width (450 mm / 17.7 in tracks) - 78 inches
Rollback angle - 25 degrees
Turning radius from the center - behind the car - 74 inches
Center Turn Radius - Clutch - 58.1in
Center Turn Radius - Bucket (Rack) - 91.1 inches
Maximum reach - with arms parallel to the ground - 51.9 inches
Choose SKID STEER LOADER 299D2 section:
Specifications
engine
Net power - 95 hp
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Net Power - ISO 9249 - 95 HP
Gross Power - SAE J1995 - 98 HP
Engine Model - Cat C3.8 DIT (Turbo)
Net Power - SAE 1349 - 95 HP
Peak Torque - 1,500 rpm - SAE J1995 - 246 lb-ft
Power train
Travel Speed - Forward or Reverse - One Speed - 5.2 mph
Travel Speed - Forward or Reverse - Two speeds - 8.4 mph
Weights
The note
Operating Weight, Operator Specifications and Dimensions, 75 kg (165 lb) operator friendly, all fluids, two-speed, 1981 mm (78 in.) Mud bucket, 400 mm (15.7 in.) Tracks, two-flange front rail / rear one-way flange, standard hydraulic flow system, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, additional counterweights and manual quick coupling (unless otherwise specified).
Hydraulic system
Hydraulic flow - High Flow XPS - Hydraulic power (calculated) - 76 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi
Hydraulic Flow - Standard - Loader Hydraulic Flow - 23 gallons / min
Hydraulic flow - Standard - Hydraulic power (rated) - 44 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure - 4061 psi
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow - 32 gallons / min
Performance characteristics
The note
Operating Weight, Operator Specifications and Dimensions, 75 kg (165 lb) operator friendly, all fluids, two-speed, 1981 mm (78 in.) Mud bucket, 400 mm (15.7 in.) Tracks, two-flange front rail / rear one-way flange, standard hydraulic flow system, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, 880 CCA battery, additional counterweights and manual quick coupling (unless otherwise specified).
Rated Operational Power - 50% Tipping Load - 4,600 lbs.
Nominal Operating Power - 35% Tipping Load - 3,200 lbs.
Nominal Working Capacity with Extra Counterweight - 4,860 pounds
Tipping Load - 9,200 lbs.
Breakout Force - Tilt Cylinder - 7270 lbs
Breakout Force - Lift Cylinder - 6162 lbs.
Land contact area - C 400 mm / 15.7 crawler - 2184in2
Land contact area - C 450 mm / 17.7 crawler - 2463in2
Ground Pressure - From 400mm / 15.7 Crawler - 5.2 psi
Ground Pressure - From 450 mm / 17.7 in the track - 4.6 psi
Service replenishment options
Cooling system - 4.1 gal
Fuel Tank - 32.2 gallons
Hydraulic Tank - 10.3 Gallons
Crankcase - 3.5gal
Hydraulic system - 14.5 gal
Diesel Exhaust Fluid (DEF) - 5 gallons
Taxi
ROPS - ISO 3471: 2008
FOPS - ISO 3449: 2005 Level I
FOPS Level II - ISO 3449: 2005 Level II
Air conditioning system
Air conditioning
The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.
Noise level
Inside the cab * - 83 dB (A)
External cab ** - 104 dB (A)
Note (1)
Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
* Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cab closed and at 70% of the maximum speed of rotation of the engine cooling fan. Sound levels may vary at different speeds of the engine cooling fan.
Note (3)
** Indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.