Caterpillar SKID STEER LOADER 299D XHP - catalog of spare parts
Dimensions
Ground clearance - 0.8 feet in
Bucket Finger Height - Maximum Lifting Height - 10.6 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 89.4 inches
Reach Lift / Dump Maximum - 31 Inch
Vehicle Width - 76 Inches
Length - Track on the ground - 69.6 inches
Length - Without Bucket - 123.5 Inches
Length - with bucket on the ground - 151.6 inches
Maximum total height - 159.4 inches
Bucket Finger Height - Carry Position - 7.7 Inches
Ground clearance at maximum lift and unload - 95.2 inches
Departure angle - 39 degrees
Maximum angle of dumping - 52 degrees
A-pillar angle - maximum height - 83 degrees
Turn radius from center - rear - 72.8 inches
Center Turn Radius - Coupling - 60.4 inches
Rotate Radius From Center - Bucket - 92.4 Inches
Maximum reach - with weapons in parallel - 50.7 inches
Bucket Pin Departure - Maximum Lifting Height - 16.1 inches
Choose SKID STEER LOADER 299D XHP section:
Specifications
engine
Gross Power - 110 HP
Net power - 106hp
Displacement - 232cu per
Hole - 3.9 inches
4.7 inch travel
Gross Power - SAE J1995 - 110hp
Engine Model - Cat C3.8 (Turbocharged)
Net Power - SAE 1349 - 106 HP
Power train
Speed forward - 2 speeds - 8.5mph
Speed reverse - 2 speeds - 8.5mph
Forward speed - 5mph
Reverse Speed - 5mph
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 44 hp
Maximum hydraulic flow of the loader - 40 gal / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 23 gallons / min
Hydraulic Flow (2) - XHP
Hydraulic Power - Estimated - 94 HP
Performance characteristics
Rated Operational Power - 50% Tipping Load - 4,550 lbs
Rated operational power - 35% tipping load - 3,185 pounds
Ground Contact Area - 2184in2
Ground Pressure - 5.3 psi
Tipping Load - 9,100 lbs.
Breakout Force - Tilt Cylinder - 7381 lbs.
Breakout Force - Lift Cylinder - 6,100 lbs
Service replenishment options
Cooling system - 3.7gal
Fuel tank - 30.8 gal
Hydraulic Tank - 10.3 Gallons
Crankcase - 2.6gal
Hydraulic system - 16 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II