Caterpillar SKID STEER LOADER 297C - catalog of spare parts
Dimensions
Track Width - 6.5 Feet in
Length with Bucket - 12.6 Feet in
Length without bucket - 10.3 feet in
Cab Height - 7 ft.
Ground clearance - 8.8 inches
Ground clearance at Max Lift and Dump - 8.2 feet in
Reach in Max Lift and Dump - 2.6 feet in
Turn radius from center - rear of car - 69.3 inches
Turn radius from center - incl. Bucket - 91.8in
Bucket Pin Height - Maximum Lift Height - 10.8 Feet
Height - Cab Top - 7 ft.
Total Length - Track - 90 Inches
Reach at maximum lift / drop - 30.2 inches
Vehicle Width - 78 Inches
Length - Track on the ground - 71.2 inches
Length - Without Bucket - 122.6 Inches
Length - with bucket on the ground - 150.9 inches
Maximum total height - 162 inches
Bucket Finger Height - Carry Position - 7.8 inches
Ground clearance at maximum lift and unload - 97.9
Departure angle - 35 degrees
Maximum angle of dumping - 51 degrees
A-pillar angle - maximum height - 83 degrees
Turn radius from center - rear - 69.3 inches
Center Turn Radius - Coupling - 58.5 inches
Turning radius from center - bucket - 91.8 inches
Maximum reach - with weapons in parallel - 50.1 inches
Pin Bucket Lug - Maximum Hoist - 14.9 Inches
Chassis
The length of the path on earth is 5.94 feet in
Choose SKID STEER LOADER 297C section:
Specifications
engine
The number of cylinders - 4
Engine make - 2236
Engine Model - C3.4 DIT
Gross Power - 94 HP
Net power - 90hp
Measured Power @ - 2500 rpm
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 94 HP
Engine Model - Cat C3.4 DIT
Engine power - ISO 14396 - 93 hp
Net Power - EEC 80/1269 - 91 HP
Net Power - ISO 9249 EEC - 91 HP
Net Power - SAE 1349 - 90 HP
Operational
Operating Weight - 10139 lbs
25.9 gallon fuel tank capacity
Cooling system capacity - 3.7 gallons
Engine oil capacity - 2.7 gal
Hydraulic Capacity - 15.1 Gallons
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Top Speed - Low Range - 5.6 mph
Max. Speed - High Range - 9.3 mph
Power train
Forward Speed - 5.6 Mph
Speed reverse - 5.6 mph
Speed reverse - 2-speed - 9.3 mph
Forward Speed - 2-Speed - 9.3 mph
Chassis
Land Contact Area - 2542in2
Ground Pressure - 4.1psi
The length of the path on earth is 6 feet in
Weights
Operating Weight - 10139 lbs
Loader
Breakout Force - 7,308 lbs
Workload - 4,561 lbs.
Tipping angle - 8585 degrees
Bucket Capacity - 0.6yd3
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic
Pump flow rate - 22.2 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Track Width - 6.5 Feet in
Height to Cab Top - 6.94 Feet in
Ground clearance - 8.81 inches
Ground clearance in Max Lift and Dump - 8.16 feet in
Reach at Max Lift and Dump - 2.52 feet in
Performance characteristics
Rated Operational Power - 50% Tipping Load - 4,200 lbs.
Rated Operational Power - 35% Tipping Load - 3005 lbs
Land Contact Area - 2542in2
Ground Pressure - 4 psi
Nominal Working Capacity with Extra Counterweight - 4,561 lbs.
Tipping Load - 8585 lbs
Breakout Force - Tilt Cylinder - 7,308 lbs
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 26gal
Hydraulic tank - 11 gal
Crankcase - 2.6gal
Hydraulic system - 15 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II