Your region: United States

Caterpillar SKID STEER LOADER 289D - catalog of spare parts

Dimensions

Dump angle - 51 degrees

Total path length - 7 feet in

Track Width - 6.4 Feet

Length with Bucket - 12.2 Feet in

Length without bucket - 9.9 feet in

Total height - 13.2 feet in

Cab Height - 7 ft.

Ground clearance - 8.9 inches

Ground clearance at Max Lift and Dump - 7.9 feet in

Reach at Max Lift and Dump - 2.5 ft.

Turning radius from center - rear of car - 70.8 inches

Bucket Pin Height - Maximum Lifting Height - 10.5 Feet

Height - Cab Top - 7 ft.

Total track length - 83.8 inches

Length - Track on the ground - 64.2 inches

Length - Without Bucket - 117.9 Inches

Length - with bucket on the ground - 146.2 inches

Maximum total height - 158.1 inches

Bucket Finger Height - Carry Position - 7.5 Inches

Ground clearance at maximum lift and unload - 94 inches

Departure angle - 33 degrees

Maximum angle of dumping - 51 degrees

A-pillar angle - maximum height - 84 degrees

Pin Bucket Lug - Maximum Rise - 14.5 Inches

Achieve - maximum lift / reset - 30 inches

Vehicle Width (400 mm / 15.7 in tracks) - 76 inches

Vehicle Width (450 mm / 17.7 in tracks) - 78 inches

Turning radius from the center - behind the car - 70.7 inches

Center Turn Radius - Coupling - 55.5 inches

Maximum reach - with arms parallel to the ground - 50 inches

Center Turn Radius - Bucket - 88.8 inches

Chassis

The length of the path on earth is 5.35 feet in

Choose SKID STEER LOADER 289D section:

4M0061 Track Bolt Caterpillar View
8C3334 Rivet Tubular Caterpillar View
9X2040 Screw Truss Head Caterpillar View
9X8118 Halogen Bulbs Caterpillar View
4D4431 Bearing Aligning Caterpillar View
6V8639 Connector Caterpillar View
3980826 Sensor Caterpillar View
6V9873 Connector Caterpillar View
2L8067 Terminal Caterpillar View
2Y5829 Hex Nuts, Phosphate and Oil Coated Caterpillar View
9X6273 Washer Caterpillar View
1955124 Cutting Edge Caterpillar View
1534816 Washer Hard Caterpillar View
6V9001 Cat Elbow Adapter Caterpillar View
3979967 Tube Caterpillar View
6V8716 Connector Caterpillar View
2396986 Plate Serial Number Caterpillar View
1S0178 Fitting Caterpillar View
3523964 Clip Caterpillar View
7X2553 Track Bolt Caterpillar View
8C3798 Hex Head Bolts, Zinc Flake Caterpillar View
3H7654 Washer Caterpillar View
8S4723 Hex Head Bolts, Phosphate and Oil Coated Caterpillar View
1761521 Terminal Caterpillar View
5P3454 Terminal Ring Caterpillar View
1851861 Seal Wire Caterpillar View
2895884 Nut Castle Caterpillar View
8T6936 Seal Caterpillar View
0336033 Oring Caterpillar View
6V9200 Elbow Caterpillar View
8C8400 Elbow Caterpillar View
5P1046 Connector Caterpillar View
1420038 Elbow Caterpillar View
3417637 Kit Cradle B Caterpillar View
3747468 Cap Seal Caterpillar View
3446145 Receptacle Caterpillar View
1538462 Clip Caterpillar View
1519274 Kit Receptacle Caterpillar View
1254791 Connector Receptacle Caterpillar View
1803007 Standard Clamp Caterpillar View
8T1905 Elbow Caterpillar View
3924904 Harness As Caterpillar View
8T8730 Socket Conne Caterpillar View
8E5702 Shim Caterpillar View
1146658 Washer Caterpillar View
5W4957 Housing Caterpillar View
3937579 Bolt Caterpillar View
3E4356 Washer Hard Caterpillar View
2H3768 Cotter Pins Caterpillar View
6V5839 Flat Washer, Phosphate and Oil Coated Caterpillar View
5W4819 Oring Caterpillar View
6V2689 Tube Heat Shrink Caterpillar View
5P7957 Lanyard Caterpillar View
3597231 Kit Seal Caterpillar View
9X6032 Hex Socket Head Bolts Caterpillar View
3498642 Bluetooth Microphone Caterpillar View
1927511 Seal Caterpillar View
6V7744 Self Locking Hex Head Nuts Caterpillar View
6V5138 Oring Caterpillar View
3776953 Sensor As Caterpillar View

Specifications

engine

Engine make - DIT

Engine Model -Cat C3.3B

Gross Power - 74.3 HP

Net power - 72.9 hp

Peak Torque - 195.5 lb ft

Measured Torque @ - 1,500 rpm

Displacement - 203cu per

Hole Diameter - 3.7 inches

4.7 inch travel

Net Power - ISO 9249 - 73.7 HP

Gross Power - SAE J1995 - 74.3 HP

Engine Model - Cat C3.3B DIT (Turbo)

Net Power - SAE 1349 - 72.9 HP

Peak Torque - 1,500 rpm - SAE J1995 - 195 lb-ft

Operational

Working Weight - 10,533.7 lbs.

24.9 gallon fuel tank capacity

Cooling system capacity - 3.7 gallons

The volume of the hydraulic system - 13.8 g

Operating voltage - 12 V

Generator current strength - 80 amperes

Top Speed ​​- Low Range - 4.5 mph

Top Speed ​​- High Range - 7.1 mph

Power train

Speed ​​- Forward or Reverse - One Speed ​​- 4.5 Miles per Hour

Movement speed - forward or backward - two speeds - 7 miles per hour

Chassis

Land Contact Area - 2015.1in2

Ground Pressure - 5.3psi

The length of the path on earth is 5.4 feet in

Weights

Working Weight - 10,533 lbs.

The note

Operating Weight, Performance, and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Two-Speed, OROPS, 1981 mm (78 in) Dirt Bucket, 400 mm (15.7 in) Track, Two-Flange Front Tension roller / single flange rear tensioner, standard hydraulic flow system, seat with mechanical suspension, optional counterweights are not provided, and quick-release coupling with manual transmission (unless otherwise specified).

Loader

Tipping Load - 7,599.4 lbs.

Breakout Force - 7,290.7 lbs.

Hydraulic system

Hydraulic flow - High Flow XPS - Hydraulic power (calculated) - 76 hp

Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3335 psi

Hydraulic Flow - Standard - Loader Hydraulic Flow - 23 psi

Hydraulic flow - Standard - Hydraulic power (rated) - 44 hp

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure - 4061 psi

Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow - 32 gallons / min

Hydraulic

Pump flow rate - 22.8 gal / min

Pressure Relief Valve - 3335.9 psi

Dimensions

Track Width - 6.34 Feet

Height to Cab Top - 6.94 Feet in

Ground clearance - 8.9 inches

Ground clearance at Max Lift and Dump - 7.84 feet in

Reach at Max Lift and Dump - 2.5 ft.

Performance characteristics

The note

Operating Weight, Performance, and Dimensions, All Based on an 75kg (165 lb) Operator, All Fluids, Two-Speed, OROPS, 1981 mm (78 in) Dirt Bucket, 400 mm (15.7 in) Track, Two-Flange Front Tension roller / single flange rear tensioner, standard hydraulic flow system, seat with mechanical suspension, optional counterweights are not provided, and quick-release coupling with manual transmission (unless otherwise specified).

Nominal Operating Power - 50% Tipping Load - 3,800 lbs.

Rated Operating Power - 35% Tipping Load - 2,660 lbs.

Nominal Working Capacity with Extra Counterweight - 4050 lbs

Tipping Load - 7,600 pounds

Breakout Force - Tilt Cylinder - 7291 lbs.

Land contact area - from 400 mm / 15.7 crawler - 2015in2

Ground Contact Area - From 450 mm / 17.7 in the track - 2272in2

Ground Pressure - From 400mm / 15.7 Crawler - 5.2 psi

Ground Pressure - From 450 mm / 17.7 in the track - 4.6 psi

Service replenishment options

Cooling System - 3.7gal

Fuel tank - 24.8 gal

Hydraulic Tank - 10.3 Gallons

Crankcase - 3gal

Hydraulic system - 13.7 gal

Taxi

ROPS - ISO 3471: 2008

FOPS - ISO 3449: 2005 Level I

FOPS Level II - ISO 3449: 2005 Level II