Caterpillar SKID STEER LOADER 289C2 - catalog of spare parts
Dimensions
Total height - 13.4 feet in
Bucket Hinge Rod - 127.6 inches
Dump angle - 50 degrees
Total path length - 7 feet in
Track Width - 6.5 Feet in
Bucket Length - 12.1 Feet in
Length without bucket - 9.8 feet in
Cab Height - 7 ft.
Ground clearance - 9.1 inches
Ground clearance at Max Lift and Dump - 8.1 feet per
Reach in Max Lift and Dump - 2.6 feet in
Turn radius from center - rear of car - 69.4 inches
Bucket Pin Height - Maximum Lifting Height - 10.7 Feet
Height - Cab Top - 7 ft.
Total track length - 83.8 inches
Reach at maximum lift / drop - 30.7 inches
Vehicle Width - 78 Inches
Length - Track on the ground - 64 inches
Length - without bucket - 116.5 inches
Length - with bucket on the ground - 144.8 inches
Maximum total height - 160.7 inches
Bucket Finger Height - Carry Position - 7.7 Inches
Ground clearance at maximum lift and unload - 96.7 inches
Departure angle - 44 degrees
Maximum angle of dumping - 50 degrees
Rear Upright Angle - Maximum Height - 85 degrees
Turn radius from center - rear - 69.4 inches
Center Turn Radius - Coupling - 57.4 inches
Turning radius from center - bucket - 88.1 inches
Maximum reach - with weapons in parallel - 50.5 inches
Pin Bucket Lug - Maximum Lifting - 14.6 inches
Chassis
The length of the path on earth is 5.34 feet in
Choose SKID STEER LOADER 289C2 section:
Specifications
engine
Engine Make - Caterpillar
Engine Model - C3.4 DIT
Gross Power - 74 HP
Net power - 73 hp
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Gross Power - SAE J1995 - 74 HP
Engine Model - Cat C3.4T
Net Power - SAE 1349 - 73 HP
Operational
Working Weight - 10,333.1 lbs
25.9 gallon fuel tank capacity
Cooling system capacity - 3.7 gallons
Hydraulic Capacity - 15.1 Gallons
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Speed - 8.5 miles per hour
Power train
Forward Speed - 2 speeds - 8.5 miles per hour
Reverse Speed - 2 speeds - 8.5 miles per hour
Chassis
Counterweight Standard - 125.7 lbs.
Land Contact Area - 2309.6in2
Ground Pressure - 4.5 psi
The length of the path on earth is 5.4 feet in
Weights
Working Weight - 10,332 lbs.
Loader
Displacement (ISO 14397) - 3650.9 lbs.
Tipping Load - 7,299.6 lbs.
Breakout Force - 7,308.4 lbs
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic
Pump Type - Standard
Pump flow rate - 22.2 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Track Width - 6.5 Feet in
Height to Cab Top - 6.95 Feet in
Ground clearance - 9.1 inches
Ground clearance at Max Lift and Dump - 8.06 feet in
Reach at Max Lift and Dump - 2.57 feet in
Performance characteristics
Rated Operational Power - 50% Tipping Load - 3,650 lbs.
Rated Operational Power - 35% Tipping Load - 2555 lbs
Ground Contact Area - 2303in2
Ground Pressure - 4.5 psi
Tipping Load - 7,300 lbs.
Breakout Force - Tilt Cylinder - 7,308 lbs
Service replenishment options
Cooling System - 3.7gal
Fuel tank - 26gal
Hydraulic tank - 11 gal
Crankcase - 2.6gal
Hydraulic system - 15 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J1043 SEPT87, ISO 3449: 1992 Level I
FOPS Level II - SAE J231 JAN81, ISO 3449: 1992 Level II