Caterpillar SKID STEER LOADER 287B - catalog of spare parts
Dimensions
Track Width - 6.5 Feet in
Length with Bucket - 12.2 Feet in
Length without bucket - 9.6 feet in
Cab Height - 7 ft.
Ground clearance - 11 inches
Ground clearance at Max Lift and Dump - 7.9 feet in
Reach in Max Lift and Dump - 2.8 feet in
Turn radius from center - rear of car - 63.6 inches
Turn radius from center - incl. Bucket - 95.8 inches
Bucket Pin Height - Maximum Lifting Height - 10.7 Feet
Height - Cab Top - 7 ft.
Total track length - 90.3 inches
Reach the Lift / Dump Maximum - 33in
Vehicle Width - 77 Inches
Length - Track on the ground - 73 inches
Length - without bucket - 114 inches
Length - with bucket on the ground - 146 inches
Maximum total height - 165 inches
Bucket Finger Height - Carry Position - 8.6 inches
Ground clearance at maximum lift and unload - 94 inches
Turn radius from center - rear - 63.6 inches
Center Turn Radius - Coupling - 59.6 inches
Center Turn Radius - Bucket - 95.8 inches
Maximum reach - with parallel arms - 54.3 inches
Pin Bucket Lug - Maximum Hoist - 15.5 Inches
Chassis
The length of the path on earth is 6.05 feet in
Choose SKID STEER LOADER 287B section:
Specifications
engine
Engine make - 2236
Engine Model - 3044C DIT T
Gross Power - 82 hp
Net power - 78 hp
Displacement - 201cu in
Hole Diameter - 3.7 inches
4.7 inch travel
Aspiration - Turbocharged
Gross Power - SAE J1995 - 82 HP
Engine Model - Cat 3044C DIT
Engine power - ISO 14396 - 80 hp
Net Power - EEC 80/1269 - 78 HP
Net Power - ISO 9249 EEC - 78 HP
Net Power - SAE 1349 - 78 HP
Operational
Operating Weight - 10,273.6 lbs.
The capacity of the fuel tank is 29.1 gal
Cooling system capacity - 2.7 gal
Engine oil capacity - 2.7 gal
Hydraulic Capacity 13.5 Gallons
Operating voltage - 12 V
The amplifier from the generator - 90 amperes
Max. Speed - High Range - 7 Mph
Power train
Forward Speed - 7 Mph
Reverse Speed - 7 Mph
Chassis
Land Contact Area - 2898.6in2
Ground Pressure - 3.8 psi Inch
The length of the path on earth is 6.1 feet in
Weights
Operating Weight - 10,275 pounds
Loader
Breakout Force - 5507.2 lbs
Workload - 3,598 pounds
Tipping angle - 7198.1 degrees
Hydraulic system
Hydraulic flow (1) - standard
Hydraulic power - 42.8 hp
Loader maximum hydraulic flow 33 gallons / min
Loader Maximum Hydraulic Pressure - 4061 psi
Loader Hydraulic Pressure - 3335 psi
Loader Hydraulic Flow - 22 gallons / min
Hydraulic Flow (2) - High Flow XPS
Hydraulic
Pump flow rate - 22 gal / min
Pressure Relief Valve - 3335.9 psi
Dimensions
Width above Caterpillars - 6.44 Feet in
Height to Cab Top - 6.97 Feet in
Ground clearance - 11 inches
Ground clearance at Max Lift and Dump - 7.83 feet in
Reach at Max Lift and Dump - 2.75 feet in
Performance characteristics
Rated Operational Power - 50% Tipping Load - 3,600 lbs.
Rated Operational Power - 35% Tipping Load - 2520 lbs
Land Contact Area - 2610in2
Ground Pressure - 3.8 psi
Tipping Load - 7,200 lbs.
Breakout Force - Tilt Cylinder - 5508 lbs
Service replenishment options
Cooling system - 2.6gal
Fuel Tank - 29.1 Gallons
Hydraulic Tank - 9.2 Gallons
Crankcase - 2.6gal
Hydraulic system - 13.5 gal
Taxi
ROPS - SAE J1040 MAY94, ISO 3471: 1994
FOPS - SAE J / ISO 3449 APR98 Level I, ISO 3449: 1992 Level I
FOPS Level II - SAE J / ISO 3449 APR98 Level II, ISO 3449: 1992 Level II